All of the articles in this proceedings volume have been presented at the ICORT (International Conference on Railway and Transportation) during 6th November 2023 in Madiun, East Java, Indonesia. These articles have been peer reviewed by the members of the Scientific Committee and approved by the Editor-in-Chief,...

This study aims to determine the effect of variations in cooling media and variations in feeding speed in wet process turning on the surface roughness of ST 60 Steel as a recommendation for the Yasa Locomotive Hall in turning wheel shafts. This research uses an experimental method on wet process turning...

Electric vehicles are increasingly in demand as an environmentally friendly solution to reducing air pollution. Reliable and efficient energy storage is critical to running electric vehicles to work optimally. With supercapacitors as a buffer in the lead-acid battery energy storage system, it can provide...

This research aims to compare two types of batteries, namely lithium-ion batteries and lead-acid batteries, in the application of electric vehicles. The simulation method carried out is to use the MATLAB/Simulink application to measure the performance parameters of the two types of batteries by comparing...

The airside is a vital object of an airport because the airside area is a high-risk area that should be free from threats such as birds and wild animals. But the real situation is still found flocks of birds that are often on the air side, which is very dangerous if the bird enters the aircraft engine...

Standard client service needs to be enhanced, in particular train fire as it is for push use service transportation land. The goal of the study is that because reliability, responsiveness, empathy, assurance, and tangibility (service quality) have a favorable impact on customer loyalty and influence...

Air transport has become the primary mode of connecting global regions, supporting international trade, cultural exchange, and economic growth. Data from Indonesia’s Central Statistics Agency (BPS) shows a significant contribution of the transportation and warehousing sectors to the country’s GDP, reaching...

South Sumatra Province has been designated for river transport arrangement in 16 Ilir Palembang City in order to realise safe river transport services through the arrangement of River Port Area 16 Ilir Palembang City. Through the implementation of the acceleration programme (quick wins) at the 16 Ilir...

Planning to replace wooden sleepers with synthetic sleepers on bridge BH 534 must be done because using wooden sleepers on this bridge is less efficient. The inefficient use of sleepers on the BH 534 bridges is because the sleepers on this bridge still use the type of wood sleeper where the nature of...

Balai Yasa (BY) is a place used for major maintenance of railway facilities. This is where the Railway facilities receive semi final maintenance (SPA), final maintenance (PA) to modifications. Some parts of the facility are being maintained, such as the bogie frame, braking, upper frame, electricity...

The maintenance of railway infrastructure is crucial to ensure operational reliability and safety, especially for railway tracks. This research focuses on designing an elevation inspection tool using a combination of precision optics telescope and laser sight. The tool’s design considers strength, user-friendliness,...

The National Railway Master Plan estimated that the potential for freight transport in Java Island in 2030 will reach 534 million tons/year. Therefore, the government is planning to develop a double-track railway line between Surabaya Pasar Turi-Kalimas/Tanjung Perak. This research aimed to add a new...

One of the efforts made by the government in improving the quality of infrastructure is the replacement of armco to box culvert at BH 1149 between Linggapura Station - Bumiayu Station on the Cirebon - Kroya crossing. The purpose of this study is to determine the potential risks that exist during the...

An oil Change is the act of maintenance on the Excavator Vaia Car (Special Equipment) at the Ngrombo Railway Maintenance Center. The research aimed to investigate the feasibility of engine oil for the Excavator Vaia Car. The method was taking the engine sample oil from 0 months to 6 months with 1 month...

In recent years, there have been significant advancements in the development of new regulations aimed at ensuring the structural integrity of passenger rail car interiors, specifically their ability to withstand compression. These regulations have been adapting to accommodate the inclusion of rail equipment...

The trunking radio system used in the Makassar - Pare-pare region utilizes DMR tier 3, an internationally recognized open standard from ETSI. The Makassar - Pare-Pare railway network is a recent route with certain areas lacking network coverage, posing safety risks for train travel. An analysis of trunking...

Platform Screen Door (PSD) is a security system on station platforms that is integrated with train doors and controlled by signaling equipment. This study analyzed the characteristics and impact of failures on PSDs to assess their reliability based on maintenance planning strategies for each piece of...

Early Warning System (EWS) at level crossing gates is a system used to provide early warning in the form of signals or lights and siren sounds when a train is approaching crossed. This level crossing is prone to accidents. In order to improve railway security and safety, railway facility detectors have...

Train is a mass transportation that can reduce congestion on the big city, but it also has an impact of noise to residential around the railroad tracks. One of the main sources of noise is the collision of the wheels with the railroad tracks, and this can be reduced by noise housings design. The purpose...

The railway level crossing is a meeting point between a highway and a train. This analysis is conducted by identifying and evaluating the components of the Concrete Level Crossing feasible according to the dynamic loads by train and vehicle. Evaluation of Concrete Level Crossing is by observing the condition...

Water injection is one of the technologies to improve engine performance. The purpose of this research is to investigate the application of water injection in a commonrail turbo diesel engine. The experimental method is used in this research by testing the power and torque of the diesel engine in conditions...

South Sumatra’s Light Rapid Transit (LRT) was built to support the 2018 Asian Games in Palembang. After the 2018 Asian Games, LRT is used as an integrated mode of transportation to support community mobility. Seeing the importance of the South Sumatra LRT, it needs to be evaluated to maintain passenger...

At PPI Madiun, the power supply system to operate the level crossing doorstop is currently still dependent on electricity from PLN. However, to reduce dependence on electrical energy from PLN as recommended by the Minister of Energy and Mineral Resources (ESDM) and the Director of PPI Madiun, the abundant...

This study used the method of finite element for modeling and analyzing the structure of the AC frame. Moreover, software was also applied to do a calculation and displayed an illustration of a prediction of the real phenomenon. The process of modeling the AC frame was carried out by utilizing software...

Infrastructure testing is carried out to ensure that railway infrastructure such as operating facilities, lines, and buildings can meet safety, technical and operational feasibility, and reliability standards in accordance with the regulations that have been made. This final project discusses the creation...

Snake motion is a movement on a pair of rail wheels that does not go straight forward but shifts to the left or right. Snake movement can cause deformation on the rail and weariness on the wheel. The snake motion can be measured using sensors that have a high sensitivity but are at risk for noise in...

Drainage is a supporting construction that functions to drain water in an area to avoid flooding. However, if the drainage is damaged, then the damage can cause flooding which can result in disruption of the road structure. On the Gadobangkong- Padalarang route, there was an inundation in the drainage...

Railbus Batara Kresna is a subsidized pioneer train with a combination of rail and bus construction. The railbus serves a 37km route from Purwosari Station to Wonogiri Station. With a ticket price of only Rp4,000, the railbus has the opportunity to become a feeder train. This pioneering public transport...

Rangkasbitung Station is a large class station that serves the departure of the Tanah Abang-Rangkasbitung (PP) Electric Rail Train and the Rangkasbitung-Merak (PP) Local Train. At this station, intermodal integration facilities are not yet available to support access that makes it easier for passengers...

The Jakarta MRT has been operating on the Lebak Bulus - Bundaran HI line with a total of 13 stations with the farthest trip fare of the Jakarta MRT at Rp14,000. Currently, an extension of the Jakarta MRT route across Bundaran HI - Kota is being carried out by adding 8 stations which will be directly...

The operation of Trans Banyumas is a significant progress for Banyumas Regency in the field of transportation due to modern technology adaptation. It is in line with the smart city idea launched by the district government, which will encourage the growth of urban areas that provide comfort, convenience,...

Aluminum 6061 is a material that is widely used in the railway manufacturing industry. Friction Stir Welding (FSW) is a solid-state welding method without the addition of filler metal. FSW utilizes heat between the rotating tool and the gripped workpiece so that the heat generated is soften and melt...

Population growth in Bandung Raya has led to an increase in the number of private vehicles and a decrease in the use of public transportation. The reason for this is the need for more quality and service of public transportation. Trans Metro buses cannot reach all areas, and more and more private cars...

The purpose of this study is to obtain stress values and safety factors on wheels with grooved wear. Grooved wear was found on the MRT wheel during the monthly inspection. The method used in this research uses the finite element method, namely ANSYS software. The depth of grooved wear used is 2 mm, 3.5 mm...

Bridges have an essential role in a sustainable land transportation infrastructure. One of the challenges today is the nature of corrosion on the bridge structure. Corrosion due to reaction with the environment can damage the integrity of the bridge structure and reduce safety. This study aims to determine...

Quality of service and promotion is one effort to increase buying interest. With the existence of good service quality and promotions that are in accordance with the targets, a company will achieve the goals that have been set. South Sumatera LRT has carried out good service quality and promotion, as...

The One of the critical advancements in railway technology is the incorporation of regenerative braking mechanisms, which harness kinetic energy and convert it into electrical energy, thus improving the energy efficiency of railway operations. This study delves into the energy balance and the potential...

The high demand for rail transportation services has encouraged the development of research in the field of railways. In the operation of trains, telecommunications has a vital function because it is related to passenger safety. The high speed of train operation requires a telecommunication system that...

The development of sound energy as an alternative energy source has become increasingly important in addressing the limitations of fossil energy sources. This research focuses on the selection of piezoelectric and electromagnetic technologies to harness the vibration or sound of trains as a battery charger...

The recent Covid-19 pandemic has shown that transportation has a significant role in creating a healthy society. Human mobility can be tracked and traced to map the spread of infectious diseases using screening, tracing, and tracking methods through policies and applications. This momentum has accelerated...

Inspections of railway infrastructure components are carried out to determine the condition and function of railway infrastructure. One of the checks carried out is a railway fastening systems inspection. By regulations, fastening systems inspections are carried out to determine the completeness of the...

The frequency of interference of the money order drive is quite high, the money order drive in the South Sumatra LRT uses the BSG-9 type. Point machines play an important role in moving train lines. If the point machine is disrupted, it can affect the safety and security of the LRT. in point machine...

Municipal waste management is an important aspect in maintaining the cleanliness of the urban environment and reducing negative impacts on human health and the ecosystem. Transport network analysis in the context of municipal waste management is a critical step to improve operational efficiency and reduce...

The adequacy of energy supply for transportation purposes with the concept of green energy from renewable sources to replace electricity supply from power utilities still needs to be improved. One of the problems is the energy transfer and management system, because each region has a different energy...

Geographic Information System (GIS) based maps of landslide susceptibility can be used to identify the landscape potency for an area or segment of a railway line. The accuracy of landslide susceptibility maps needs validation to ensure the information provided by the GIS map is reliable. This study aims...

This research focuses on studying harmonic disturbance conditions that have the potential to arise at DC traction substations caused by non-linear loads, namely rectifiers. In the DC railway traction substation system there is a rectifier component whose function is to convert AC power to DC. The aim...

This research proposes an analysis of power requirements for the development of an optimal hybrid power generation system, especially for level crossings. Level crossings are critical points in transportation infrastructure that require a reliable power supply for train operations and traffic management....

Secondary Surveillance Radar (SSR) is a flight surveillance facility whose function is to monitor and supervise aircraft movement activities in the air. This guide aims to: 1) design a radar that collects aircraft information, 2) create a tool that can be useful for cadets learning at the Makassar Aviation...

RTL-SDR is an electronic hardware device in the form of a USB dongle with a central component in the form of a microchip manufactured by Realtek Semiconductor Corp, Taiwan. SDR itself stands for Software Defined Radio. RTL-SDR is widely used by hobbyists, educators, and learners to conduct radio signal...

Waiting for services is one of the important variables in transportation. The environmental conditions of the waiting facility can be something that can influence the user’s condition, such as feelings of satisfaction and security, whether they are getting worse or better. The research tries to find...