Zinc nitrate hexahydrate, ethylene glycol, thiourea and triethanolamine were purchased to be starting materials. Nano zinc sulfide solution has been successfully prepared by Chemical bath deposition method, and then the prepared zinc sulfide modified polyhydroxybutyrate valerate (PHBV) to form the thin...

Climate change and its adverse effects caused a large number of migrants, had been become the 21st century challenges for human society. Under climate changing, human has implemented macro and micro climate engineering in response to deteriorating natural living conditions, and a number of growth-promoting...

In the overall context of global climate change, global warming, melting glaciers further have increased the probability of occurrence such as a gradient with a slow onset of climate risk and drought, floods and other extreme mutation catastrophic climate risk, These adverse effects has brought about...

In multi-component spectral analysis, informative variables selection is important to get satisfied performance. The present research intends to establish relationship between eggs freshness and NIR spectroscopy, and build a compact and robust calibration model. Graphically-oriented local multivariate...

Objective: this study examined the effects of flavonoids from Eucommia ulmoides (FEU) on antioxidant systems, lipid peroxidation and oxidative deoxyribonucleic acid (DNA) damage after exhaustive exercise. Methods: the mice were then divided into four groups, one control group and three FEU treated groups....

Microemulsions have great applications in food products. However, due to the complex attributes of microemulsions, it requires various techniques to synthesize and characterize microemulsions. This includes studies of the phase behavior?size of the microemulsion droplets. This paper reviews different...

This research based on fresh coconut and the coconut puree was conducted with the ultra-high pressure (500MPa/ 10min). Two strains of pressure-resistant bacteria in coconut puree were screened out and identified as Leuconstoc mesenteroides subsp mesenteroides and Leuconstoc mesenteroides subsp dextranicum...

During the past several years, the explosion risk analysis of each stage in oxygen CBM liquefaction process has been carried out by a large number of domestic scholars. In this work, firstly, safety evaluation of the coalbed methane liquefied process was summarized. Then, the experiment of the explosion...

Three kinds of salen catalysts, mono-chloromethyl-salen-Mn, tetra-tert-butyl-salen-Mn and mono-chloromethyl-slaen-Co, were synthesized and then immobilized onto ceramic membranes by two steps. First, 3-aminopropyltriethoxysilane (APTES) was grafted on ceramic membranes in order to introduce amino groups...

In the present work, we propose a normalised real-time quantitative PCR assay to determine the sheep content in raw meat. For the development of the method, the mixtures meats contain known amounts of sheep meat in pork from 20% to 100% can be successfully in-house validated by a normalised calibration...

The concentrations of NH4+-N, NO2--N and NO3--N were measured in batch experiments to study nitrification kinetics in IFAS system with different FR at 0%-50%. The results showed that both of NH4+-N oxidation rate ( ) and NO3--N production rate ( ) increased with FR, which respectively increased from...

The application of ultraviolet absorption detector (UV) and circular dichroism (CD) detectors in series in HPLC systems has been increased in recent years. In this work, an effective method to determine the enantiomer concentration on line in chiral drugs was explored. Ibuprofen (IBP) racemate was applied....

There are huge demands for antibacterial metallic materials in protecting human health from bacteria propagation and bacteria spreading, and in preventing industrial equipments from microbial corrosion. In this paper, some common inorganic antibacterial agents such as Ag+, Cu2+, Zn2+ and Ce2+ were introduced;...

Based on constraint phononic crystal cutoff frequency characteristics, the paper studied effects on the phonon crystal band structure of the two-dimensional phononic crystal substrate density and elastic modulus under constraints. The spring quality equivalent model is proposed for the theoretical interpretation,...

The endophytic N-fixing microbes Klebsiella oxytoca NHglj1, Klebsiella oxytoca NHglj2 and Enterobacter asburiae LMw107 of Nitraria were selected to explore the effect of Nitraria schoberi L. plant sap on salt and alkali resistance of its 3 endogenous N-fixing microbes strains in the Winogradsky's N-free...

The microwave pyrolysis of the low-rank coal is a new technology, which solves the utilization problems of coal cleaning conversion. On basis of experiments, this paper conducted comparative study on microwave co-pyrolysis products of low-rank coal under H2 and N2 atmosphere, respectively. The composition...

In order to explore the blending mechanism of bio-binder and petroleum asphalt, this paper used high shear equipment to mix them, with varying conditions of temperature (130 ~ 145°C, 145 ~ 160°C, 160 ~ 175°C, 175 ~ 190°C), speed (500r, 1000r, 2000r, 3000r) and mixing time (15min, 30min, 45min, 60min)....

Objective: the aim of the present study was to determine the effects of ginsenosides-Rb1 (GRb1) on immune function of rats during strenuous physical exercise. Methods: The rats were randomly divided into four groups: one control group and three different doses of GRb1 (25, 50 and 100 mg/kg) treated groups....

In order to explore Rhizobium medium production using leaching liquor of green corn straw. Corn stalk powder extract solutions (CSE) are obtained and suitable carbon sources (glucose) were supplemented as liquid and solid Rhizobium medium. Compared with the yeast extract mannitol (YEM) medium, Rhizobium...

Pyrroloquinoline quinone (PQQ), an important natural product, is biosynthesized by Gluconobacter oxydans. In order to prepare the product in large scale, a rapid and selective chemical complexation extraction (CCE) is proposed to separate and purify PQQ from fermentation broth. In this work, the effect...

This paper introduces energetic igniters fabricated using TaN film bridge by magnetron sputtering. It is inferred from the image of wet-etched TaN film bridge that film edge is clearly visible and relatively smooth with lateral erosion size of 5 ?m. The X-ray diffraction (XRD) and Temperature Coefficient...

A Escherichia coli strain producing phytase named DH5α was chosen from four E. coli stains, the enzyme activity was 17.88 U/mL after fermented at 37°C for 2 days. The enzymatic properties of crude enzyme solution were studied. The optimal temperature was 55°C; optimal pH was 2.5 and 7.0, enzyme had certain...

[Purpose] To study the component change of urine crystallites with different sizes in the urines of calcium oxalate (CaOx) calculi patients and healthy controls with placement time. [Methods] A combination of high-resolution transmission electron microscopy (HRTEM), fast Fourier transformation (FFT),...

[Purpose] The formation of kidney stones related closely to the properties of urinary nanocrystallites. This study aimed to investigate the components of urinary crystallites in 56 cases of patients with magnesium ammonium phosphate (MAP) stones compared with the components of stones. [Methods] X-ray...

[Purpose] This study aimed to investigate the components of urinary crystallites in 275 cases of patients with calcium oxalate (CaOx) stones compared with the components of stones. [Methods] X-ray diffraction (XRD), Fourier-transform infrared (FT-IR) spectrometer, selected area electron diffraction (SAED)...

1. Objective: Salvia miltiorrhiza is a traditional Chinese herb medicine and is widely used in clinic application. This study is intended to extract polysaccharides from Salvia miltiorrhiza by ultrasonic method in order to evaluate its antioxidation activity. 2. Methods: (1) Spectrophotometry is used...

Developing coatings on implant surface as drug carriers can reduce organ toxicity and effectively deliver drug locally to the target compared with the oral approach. Titanium dioxide (TiO2) nanotube has great potential for this application for widely used Ti implants because of its high surface area,...

Taking the effluent of secondary biological treatment in one pharmaceutical factory as the object of study, taking coagulation, ultrafiltration and reverse osmosis treatments as the core technologies of the water reuse pilot test, the application effects of treatment process were analyzed. The results...

The use of relatively expensive and nonrenewable precursors such as natural coal is the main reasons for the high cost of commercial activated carbons. Agricultural wastes are considered as promising precursors for low cost and high surface area activated carbons due to their high volatile matter and...

Based on the analysis of the potential ecological risk posed by the development of industrial cities along the Second Songhua River, according to the calculated ecological risk relative values and the development in different directions, the risk control measures aimed at different cities were put forward...

Objective: To establish a method for the extraction of polysaccharide from waste wine yeast slurry by composite enzymatic method. Methods: On the basis of single factor experiments, the effects of operating conditions, such as enzyme mixture ratio, enzyme added, composite enzymatic extraction pH, and...

During the period from January 2011 to May 2015, we analyzed and studied the contents of harmful substances (Hg, Pb, As, Cd, Cu, Zn, Cr, Petroleum hydrocarbons, Polychlorinated biphenyls, Fecal coliforms) which were collected from the body of 300 Ruditapes philippinarum at the Xiangshan Bay areas and...

Objective: Photosystem I (PS I ) is a large membrane supercomplex that consists of a reaction centre and light-harvesting complex (LHC I ). PS I catalyzes light-driven electron transport to produce reducing power NADPH, and then NADPH are used in the dark reactions of photosynthesis to fix CO2 and synthesize...

Objective: The major light-harvesting complex of photosystem II , Lhcbs, are assembled in its trimeric form, equipped with chlorophyll and xanthophylls, embedded in the thylakoid membrane of green plants, and play critical roles in harvesting light energy for photosynthesis. The objective of this work...

1. Objective: Jianghong yulu is a traditional seasoning produced through the salting and fermentation of fresh Harengula Zunasi Bleeker in Suixi, South of Guangdong in China. The manufacturing process is quite complex, including two stages, namely brining and spontaneous fermentation. In this work, the...

Nitric oxide (NO), as a signaling molecule in vivo, plays an important regulatory role in a variety of physiological and pathological conditions. Mesenchymal stem cells (MSCs) are pluripotent progenitors that can differentiate into a variety of cell types. Vascular endothelial growth factor (VEGF) induces...

In order to achieve an accurate expression and effective sharing about the hazards monitoring and managing knowledge between the upstream and downstream of the cold chain, the paper establish a HACCP ontology model of the cold chain on the basis of analyzing and summarizing general business processes...

Objective: To optimize the enzymatic digestion processing parameters of soybean and improve the antioxidant activity of soybean peptides. Methods: microwave-assisted enzymatic digestion (MAED) was applied to extract antioxidant peptides from soybean with maximized antioxidant activity by response surface...

Delftia acidovorans SPH-1 is a beta-Proteobacterium that degrades a number of organic compounds. Genomic islands play the important role in horizontal gene transfer. Two prophage-related genomic islands (GIs), SPHGIGly-CCC-1 and SPHGIGly-CCC-2, were determined and are integrated into 5’ and 3’ end of...

Tm3+-doped Li2O-SrO-ZnO-Bi2O3 (LSZB) glasses that are suitable for optical amplifier applications have been fabricated through the conventional melt-quenching method, and the spectroscopic properties of Tm3+ in the glasses were characterized. The density, the refractive indices, the optical absorption,...

A novel process, natural freezing, was developed to remove ammonia from wastewater in this study. A series of experiments were carried out to examine the ammonia removal and ice productivity in laboratory in Dalian, the effect of operating conditions such as solution concentration, pH, ice content formed,...

The Young leaves of green beans sprouts were used as experimental materials, total DNA was extracted by using methods including magnetic bead and traditional SDS methods. Integrality and purity of nucleic acids were detected with agarose gel electrophoresis, ultraviolet absorption and PCR.The results...

Objective: This study was conducted to evaluate the effects of different preparation methods on the quality of dietary fiber from bamboo shoot (BDF). Methods: Four methods including water-washing (WT), acid-base treatment (ABT), fermentation (FT) and enzyme treatment (ET) were carried out, and the composition,...

The performance of high-strength bolt corrosion fatigue related to the safety of structure. It is generally thought that high-strength bolt crack size and the critical crack size conform to logarithmic normal distribution. If the probability density functions of crack size and the critical crack size...

Using dredged sediments as construction materials can alleviate the problem of sediment disposing, while properties have to be improved for corrosive environment. The effectiveness of using sodium bentonite and agent J(home-made agent) was investigated by means of laboratory tests to evaluate the compatibility...

Choosing cement and lime as inorganic binder, stabled chromium slag and then did the tests of the compaction, unconfined compressive strength and the stability for studying it as road base material, perfected the base material mixture ratio design and comparatively analyzed its mechanical properties...

Machine failure prognostic is concerned with the generation of long term predictions and the estimation of the probability density function of the remaining useful life. For this we propose a framework for data-driven prediction of RUL. To solve the problem of lacking direct condition information in...

In the absence of urea, urease is demonstrated to catalyze the hydrolysis and polycondensation of the SnCl2 aqueous system to form crystalline mesoporous SnO2 at room temperature. The resulting SnO2 has a high specific surface area of 231~248 m2 g-1 with uniform pore size at 3.3nm, and the porous structure...

The emissivity of different topographies of iridium films which were obtained using Ir(acac)3 (1.216×103 Pa) and hydrogen (5.575×104 Pa) in a cold-wall reactor at atmospheric pressure was studied. The bigger size the grains are, the uneven topography is obtained, the higher the emissivity is. The bigger...

Under the background of the catenaries of the second double line of Lan-Xin Railway in strong wind zone, we established the finite element mode of the four-span structure with catenary, and compared the value of model elastic to verify the correctness. Besides, we get some useful conclusions from the...

In order to improve the adsorption performance of Attapulgite (ATP) on dyes. ATP was modified by cetyl trimethyl ammonium bromide (CTAB), and the ATP before and after modified were characterized with XRD and FT-IR. The results showed that ATP had been modified with CTAB successfully, and crystal structure...

In order to improve the adsorption performance of Attapulgite (ATP) on dyes. The ATP activated with hydrochloric acid was organic modified with silane coupling agent KH570. And the modified attapulgites was characterized by Fourier transform infrared spectroscopy and X-ray diffraction technique. By evaluating...

In order to improve the dispersive and lipophilic properties of Nano-Al2O3 in composite coatings, surface modification of Nano-Al2O3 by titanate coupling agent TC-114 was researched. The modification effect on Nano-Al2O3 was measured with the activation index and the lipophilic degree. The influences...

working with waste water contain dyes presents challenges, so to find some photocatalyst artificial synthesized is a fascinating research job. Using Na2WO4•2H2O, Zn(NO3)2•6H2O, Bi(NO3)3•6H2O and HF as raw materials, three different mole ratio of photocatalyst of Bi2WO6-xF2x / ZnWO4 have been successfully...

An aqueous solution containing deionized water, cobalt nitrate hexahydrate (Co(NO3)2•6H2O), ethylene glycol (EG) and urea (NH2CONH2) were reacted in an autoclave with hydrothermal reaction method at 180 oC for 20 h to generate precursors with 0.1%, 0.2%, 0.3%, 0.4% and 0.5% of La (NO3)3. Then the precursor...

Using Ni(NO3)2•6H2O, Bi(NO3)3•5H2O and NH4VO3 as raw materials, Ni-doped BiVO4 photocatalysts with monoclinic scheelite were prepared by a low-temperature grinding method. The physical and optical properties of the samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM)...

Using Bi(NO3)3•5H2O, NH4VO3 and Zn(NO3)2•6H2O as raw material, Zn-doped BiVO4 photocatalysts were successfully prepared by a low-temperature grinding synthesis. And the samples were characterized by X-ray diffraction (XRD), Infrared spectroscopy (FT-IR) and UV-Vis diffuse reflectance spectroscopy (DRS)....

Fe/BiVO4 photocatalyst was synthesized via a low-temperature solid state method by using the Bi(NO3)3•5H2O, NH4VO3 and Fe(NO3)3•9H2O as starting materials. And X-ray diffraction (XRD), Scanning electron microscopy (SEM), Infrared spectroscopy (FT-IR) and Ultraviolet-visible diffuse reflectance spectra...

Using the Bi(NO3)3•5H2O, NH4VO3 and 50% Mn(NO3)2 solution as raw materials, the novel Mn2+-doped BiVO4 photocatalysts was successfully prepared by a low-temperature grinding synthesis. And characterized by X-ray diffraction(XRD) and scanning electron microscope(SEM). The Methyl Orange (MO) was simulated...

In this experiment, Sm (NO3) 3•6H2O, hexamethylene tetramine (HMT) and glucose as the main raw material, nanosized Sm2O3 was prepared by hydrothermal method. Sm2O3 samples were characterized by XRD, SEM, FT-IR, TG-DTA and DRS respectively. It found that plus C elements could increase the crystallinity...

Electromagnetic radiation pollution has become the fourth pollution sources on a threat to people's health. This paper selects ferrite as an absorbing agent, preparing a new anti-electromagnetic radiation gypsum board. The results show that, absorbing properties of gypsum board decreases first and then...

Kenitic of thermal degradation of PPS were studied undernitrogen, oxygen and airin formal works. The integral Coats-Redfern method based on single heating rate is employed for the kinetic analysis of the pyrolysis processunder different oxygen concentrations. The results indicated that only one stage...

As a result of resin mineral composite (RMC) possesses excellent vibration alleviating properties, it has attracted much attention in the field of elementary machine components. However, applications of RMC are restricted due to its limited mechanical properties. In this paper, the effects of baking...

Development of green clean energy has become one of promising challenge recently. One popular application of solar energy is photocatalysis, where semiconductors were used as photocatalyst to convert solar light into photoelectrons/holes. Photocatalysis technology has been widely applied for water splitting...

Na-MMT/Poly-Vinyl acetate-Acrylate (PVA) nanocomposite emulsion was prepared by in situ emulsion polymerization in the presence of exfoliated Na-MMT suspension. Effect Na-MMT content on the polymerization process and stability of the emulsion was studied. The water-proofing, thermal stability and anti-aging...

This paper use plum-blossom tourmaline as anion additive, filled to PET recycling material as modifying agents. Successfully prepared a composite material can release anions. The effect of different percent composition on heat distortion temperature and anion releasing performance of polyester recycled...

At present, tissue engineering scaffolds in the process of clinical medicine plays an irreplaceable important role. Based on the in-situ precipitation combined with frozen extraction, good n-HA dispersion and three-dimensional (3D) structure of n-HA/PLLA-PCL composite nanofibrous scaffolds were prepared....

A novel solvent-free photosensitive polyester based on the hyperbranched aliphatic polyesters has been studied. The hyperbranched aliphatic polyesters (Polymer A), which was prepared from 2,2-dihydroxymethyl butyric acid(DMBA) containing one carboxylic group and two hydroxylic groups, Trimethylolpropane(TMP)...

With the sustainable development of economy, solar energy has been widely used as a clean energy, photovoltaic industry has been rapid development. This article summarizes the summary and classification of solar photovoltaic modules frame; Comparative analysis is mainly focused on the aluminum frame,...

Reviewed the summary and classification of PV mounting system for solar power station. Analyzed the advantages and disadvantages of the optimum tilt angle of fixed, the horizontal single-axis tracking type, the diagonal single axis tracking type and the dual axis tracking type mounting system for solar...

Diamond-like carbon (DLC) film has drawn an intensive concern, but suffers from its poor toughness. Characterization method for the film toughness is not available to date, which hampers the researches for toughening DLC films. This work attempts to reveal the scratch failure mechanism from stress aspects,...

Hydraulic maintenance vehicle for aviation is a critical ground device to ensure the flight safety and the provision of hydraulic oil. A novel multi-functional vehicle for aerial hydraulic maintenance is designed for proposing a maintenance approach for modern aircraft. Aiming at issues of existing ground...

Photodegradation of Polycyclic Aromatic Hydrocarbons (PAHs) is a main environmental behavior and plays an important role in the fate of PAHs in environment. In order to understand the photodegradation law of Polycyclic Aromatic Hydrocarbons?PAHs?in soil, aeolian sand in blow-sand region of Northern Shaanxi...

The synthesis and fluorescence properties of water-soluble ZnSe:Fe/ZnS core/shell quantum dots with L-cysteine as the stabilizer in aqueous solution are reported in this paper. The structure, component and fluorescence properties of quantum dots were characterized by X-ray powder diffraction (XRD),infrared...

Deposition of few-layer graphene films on dielectric substrate by using a novel GaxNi1-x flux LPG (Liquid Phase Growth) method is demonstrated. The graphene films shape themselves as circular thin films. The influence of the ingredients in the GaxNi1-x system on the quality of synthesized graphene is...

In this study, a simple photochemical method for preparation of Ag/SnO2 composites is presented. Ag nanoparticles were grown on the surface of SnO2 particles in situ by UV light induced photoreduction of silver nitrate. Scanning electron microscopy (SEM), energy dispersive spectrometry (EDS) and X-ray...

Phase-change materials have attracted more and more attention in the fields of both academic research and industrial application. To develop a simple, efficient and environment-friendly method for preparing polymer phase-change materials, microwave-assisted technology was employed to synthesis urea-formaldehyde...

The chitosan was modified with L-alanine, which was used for the adsorption of cesium ion in aqueous solution. The results showed that: chitosan modified with L-alanine can remove cesium ions in the solution. When the initial concentration was kept as 150mg.L-1, the optimal adsorption conditions were:...

Large amounts of carbon dioxide (CO2) emissions caused more and more extreme weather. In this study, the maximum reduction of power CO2 emissions is the management objective based on three significant ways in the planning period, which are energy conservation, reduction project and power structure adjustment....

Power industry as the main source of CO2 emissions, is facing tremendous challenge of CO2 emission reduction during the periods of “12th Five-year” and “13th Five-year”. How to maximize the reduction of power CO2 emissions under the premise of regional economic development and energy requirements is...

We propose and demonstrate Sodium Zinc Molybdenum Tellurite glasses (Na2O-ZnO-MoO3-TeO2 or NZMT) as suitable hosts for rare earth ion Holmium (Ho3+) operating at 1.2?m and 1.37?m wavelength. The density, the refractive indices, the optical absorption have been measured. The Judd-Ofelt intensity parameters...

A simple, inexpensive, and efficient one-pot synthesis of 1,4-dihydropyridine via Hantzsch reaction was achieved in good to excellent yields under catalyst free conditions by using PEG400 as solvent. In this reaction, PEG-400 was used as the solvent, which has such advantages: absolutely nontoxic, inexpensive,...

The Pd Nanoparticles attached on graphene nanosheet (GNS) were synthesized by a simple method. The morphology, structure and component for the a obtained graphene/Pd hybrids have been characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and X-ray photoemission spectroscopy...

a hybrid material of three-dimensional graphene sheets beaded with bimetallic PtPd nanoparticle was prepared by using a simple process. The three-dimensional graphene/PtPd hybrids exhibited an interconnected microporous framework with PtPd NPs dispersed and encapsulated within the graphene sheet layers....

Manganese oxide/mesoporous carbon (MnO2/MCs) spherical composites were prepared by hydrothermal method. The resorcinol and potassium permanganate were used as carbon source and manganese source,respectively. The morphology and pore character of the carbon materials were investigated by scanning electron...

The aim of this paper was to investigate adsorption of cupric ionin wastewater with a new type of adsorbent, namely natural oxidized celluloses(NOCs), whichwas synthesized in a specialselective oxidation system withraw cellulose. The characterization of NOCs was investigated by FTIR and the morphology...

A simple and reliable method combining dispersive liquid-liquid microextracion (DLLME) with capillary gas chromatography (GC) using flame ionization detection was developed for simultaneous determination of phenol (PN), p-methyl phenol (p-MPN), o-nitrophenol (o-NPN), and 2, 4-dichlorophenol (DCPN) in...

Heat-sealing BOPP films are used widely as commercial packages in recent years. However, nowadays there are some obstacles in heat-sealing BOPP films producing, for example the heat sealing strength is relatively low, which makes heat-sealing BOPP films not satisfy the increasing demands of the modern...

Objective: a fast, simply, reliably and accurately high-performance liquid chromatography (HPLC) method for the simultaneous quantitation of commonly used organic acid and monosaccharides in food industry such as benzoic, malic, citric and quinic acid, fructose, glucose has been developed. Methods: In...

According to the situation of water plugging in horizontal well using screen pipe completion in Liaohe oilfield, emulsion polymer gel, relative permeability correctives and oil soluble resin are studied in the paper. Three systems are evaluated in the lab. The results indicate that emulsion polymer gel...

The preparation of peroxyacetic acid (PAA) using acetic acid and hydrogen peroxide (H2O2) in the presence of perfluorinated resinsufonic acid (Nafion-H) in room temperature has been studied. The prepared PAA is determinate with Au electrode by cyclic voltammograms of after background subtraction. A form...

The aim of this work is to study the possibilities of structural-phase transformations of carbon-containing raw materials by mechanical activation and plastic deformation on dispersion strengthening and modification of aluminium composites. We studied the processes of structure formation of ligatures...

Graphitized steel in some cases, due to its intermediate position in composition and properties between low-carbon steel and cast iron, can provide the necessary combination of properties of structural material. They are successfully replace ductile iron, carbon and low-alloy steel in the manufacture...

For urban rail transit enterprises, estimation and forecast of operating costs is important reference basis to keep runinng well, and it is also an effective means to maintain the sustainable development. In this article, firstly, a framework of calculating the urban rail transit operating costs will...

Objective: This paper tracked the emergence process of three CBDs in Shenzhen, and made a comparison of the public realm among them. Methods: Field investigation was conducted over the public realm in the three CBDs, including land use, parking, motor & non-motor traffic and public space. Results: Luohu...

Domestic prefabricated construction has developed for a long period, and has attracted more and more attentions. This paper analyzes the progresses it has made in technical and material aspects through history and prospect. Furthermore, the features and advantages are summarized in order to promote the...

By using the analysis tools of scanning electron microscope (SEM) and energy dispersive X-ray (EDX), the reason for the disqualified Z-direction performance of a 60mm Q370qEZ35 heavy steel plate was investigated. The results showed that the disqualified Z-direction performance of Q370qEZ35 was due to...

Dynamic traffic state identification is important to traffic control and guidance on urban arterial road, according to the fuzzy characteristics of the traffic flow, this paper firstly establishes a dynamic traffic state identification model based on improved Fuzzy C-Means (FCM) clustering to divide...

Room decoration is the recreation activity carried out by the architect in a given building space. It is the treatment for the interior space provided by a building, and specifically, it refers mainly to the ceiling, wall and floor in enclosed interior space. The paper focuses on the application of building...