Proceedings of the 2015 6th International Conference on Manufacturing Science and Engineering
1222 authors
- An, Liping
- Pharmacological Research of Schisandra Chinensis(Turcz.) Baill.
- Bai, Song
- The Design of Normally-off 1300V 4H-SiC VJFET
- Bai, Song
- High voltage and large current dynamic test of SiC diodes and hybird module
- Bai, Weibing
- Research of Anti-reflective and Protective Symmetrical DLC Films Deposited by Pulsed Laser
- Bao, Binbin
- 3D Analysis of Metal Particle Flow Law in Forging Process of Turbine Blade
- Bao, Yanling
- A Complex Organic Modification on CNF Filler and Effects on Epoxy Resin Behavior
- Bao, Yidong
- An Improved Canny Algorithm Based on Median Filtering and Adaptive Threshold in Robot Training System
- Bian, Heying
- Study on preparation and properties of pH, temperature and ionic sensitive polyurethanes hydrogel
- Bian, Wei-Wei
- Strapdown Inertial Navigation Algorithm Based on MIMU and Its Application in Missile Ejection Test
- Bo, Zhang
- Analysis of mechanical characteristics force signal of high voltage circuit breaker
- Bo, Zhang
- Analysis of mechanical characteristics force signal of high voltage circuit breaker
- Cai, Juan
- The Fundamental Theory of True 3D Virtual Reality and The Development of Scene Structure Research
- Cai, Juan
- The Image of The Entire Moon Based on The CCD Stereo Camera Data of Chang’e-1
- Cai, Yuanqi
- Research on New Energy Recovery Retarder
- Cao, Huiying
- Study on the Grindability Ranking of Granite Using Fuzzy Analytical Hierarchy Process and TOPSIS Approaches
- Cao, Jianbo
- Research on New Energy Recovery Retarder
- Cao, Jianbo
- Design of a New Type of Mechanical Mechanism Demonstration Teaching Aid
- Cao, Jianxia
- Research on New Energy Recovery Retarder
- Cao, Jianxia
- Design of a New Type of Mechanical Mechanism Demonstration Teaching Aid
- Cao, Jianzhong
- Study on Fuzzy Self-adaptive PID for Galvanometer Control System
- Cao, Kai
- Comparison of some mask protections of DES against power analysis
- Cao, Lingzhi
- Construction and experiment on micro-gyroscope detection balance loop
- Cao, Qinghao
- Developing an AR-Based Upper Limb Rehabilitation System with Sensors
- Cao, Xiaocheng
- Effects of different drying methods on freshness of Pseudosciaena Crocea fillet
- Cao, Yang
- Research on the Tourism Scenic Spot E-Business Integration Framework
- Chai, Xiaojun
- Influence of the Deviation of Rolled Piece on Its Asymmetric Degree of Profile in Hot Rolling
- Chang, Lilun
- Pt-MoSx/Graphene Nanocomposite for the Hydrogen Evolution Reaction
- Chen, Chong
- Application of Material Balance Equations of Multicompartment Gas Reservoirs in YC Gas Reservoir
- Chen, Chun
- Application of Kalman filter in power plant
- Chen, Chun
- Fault Diagnosis and Forecast of Substation Equipment Temperature Based on Fuzzy C Means Clustering Algorithm
- Chen, Cui-Ce
- Quality-Detection for Boom Cylinder Remanufactured Products
- Chen, Dandan
- Numerical analysis of effect of filtration on removal of inclusions in AA3104 aluminum alloy
- Chen, Fei
- Reliability Analysis of Numerical Control Lathe Based On The Field Data
- Chen, Fei
- Reliability Model for subsystems of CNC Machine Tools based on the Repair Degree
- Chen, Gang
- The Design of Normally-off 1300V 4H-SiC VJFET
- Chen, Gang
- High voltage and large current dynamic test of SiC diodes and hybird module
- Chen, Guiling
- Influences of Material Parameters on Power Spinning Process of Large Ellipsoidal Heads with Variable Thicknesses
- Chen, Haiquan
- Principle and kinematic model analysis of a new type of crane telescopic sleeve for marine crane
- Chen, Haiquan
- Design and implementation of the noise sensor signal conditioning
- Chen, Hanxin
- Particle Swarm Optimization Wavelet Neural Network Of Gearbox Fault Diagnosis
- Chen, Jiajun
- Compatibility of Polymer and Remediation Agents for Enhanced Soil Remediation
- Chen, Jianjun
- The Content Analysis of Pb in Representative Green Belts Plants on Major Traffic Road of Zhenzhou City
- Chen, Jianyou
- Research on Key Energy-saving Techniques for A Novel Full Air Cooling UV-curing Oven via CFD Approach
- Chen, Jun
- Effect of Heavy Metal Stress on Antioxidase Enzymes
- Chen, Kaifeng
- A post-evaluation Research of Economical Effects for Power Grid Construction Project Based on ANP-Hesitate Linguistics
- Chen, Qi
- The research of the power generation performance improvement technologies on fixed-pitch wind turbine
- Chen, Shanglong
- Enhanced the adsorption of cadmium by modified orange peel with sodium hydroxide and ethyl alcohol
- Chen, Shuhong
- Control Chart Patterns Recognition based on DAG-SVM
- Chen, Shuoping
- Photoluminescence from gold nanoparticles modified by polyvinylpyrrolidone (PVP) via hydrothermal synthesis
- Chen, Siyu
- Configuration Analysis and Gene Modeling of Multi Knuckles Nimble Finger with Metamorphic Function
- Chen, Songsong
- Calculation method of carbon emission flow in power system based on the theory of power flow calculation
- Chen, Wen-Gang
- Effects of Composite surface modification on the tribological characteristics of Cylinder Liner-Piston Ring
- Chen, Wenjauh
- Pt-MoSx/Graphene Nanocomposite for the Hydrogen Evolution Reaction
- Chen, Xi Ying
- Application of Quality Control Chart in research Quality Management
- Chen, Xia
- Anaerobic degradation of polyethylene glycol 400
- Chen, Xiaojuan
- Reliability Analysis of Numerical Control Lathe Based On The Field Data
- Chen, Xiaojuan
- Reliability Model for subsystems of CNC Machine Tools based on the Repair Degree
- Chen, Xiaoxue
- The study of 3-strand PP/PE composite monofilament Rope
- Chen, Xiaoyu
- Theoretical analysis on combustion features of dimethyl ether and liquefied natural gas
- Chen, Xingkai
- Mechanical properties analysis of CFRP tie bar based on ANSYS
- Chen, Xinqin
- Performance Evaluation of Naval Minesweeping and Estimation of the Number of Remaining Mines based on Bayesian Estimation Theory
- Chen, Xuemei
- An Experimental Study of Installing-Holes Parameter Optimization for Metallic Inserts Bonded into CFRP Laminates
- Chen, Youliang
- Low Density Coarse coal Slime Separation with Teetered Bed Separator
- Chen, Yu
- Research on the model of variable-rate fertilization in Maize Based on Geographic Information System
- Chen, Yuanhua
- Research on the Top-design of Intelligent Environmental Protection
- Chen, Yue
- Study and Design on an Improved AODVjr Routing Algorithm
- Chen, Yulin
- Detecting Social Circle in Social network Automatically
- Chen, Zhenting
- Electromagnetic Current Transformer Transfer Characteristics under harmonics load
- Cheng, Fengmin
- Research on Video Object Segmentation Algorithm Based on Background Reconstruction
- Cheng, Li
- Special purpose equipment design of crystallizer copper tube for inner hole plating
- Cheng, Tao
- No-reference blur image quality assessment based on Simulated Annealing and General Regression Neural Network
- Cheng, Tao
- Method of image quality assessment based on region of interest and Structural Similarity
- Cheng, Zhi
- Research on tracking parameter calibration method of target miss-distance for laser tracker
- Chu, Binbin
- Study of Logistics Management in Workshops Based on RFID
- Cui, Chao
- Smoothing finite-element investigation of sheet forming limit
- Cui, Chao
- A comparative study on the effect of the stress relieving annealing on the residual stress and the properties of 5B70 and 5A06 aluminum alloys
- Cui, Chao
- Prediction of incremental spacing in press bend forming of the aluminum alloy integral panel
- Cui, Chao
- Analysis of Prospect of Application Laser induced bending forming technology in the field of aerospace
- Cui, Cheng-Jun
- Research on tracking parameter calibration method of target miss-distance for laser tracker
- Cui, Hong
- A Complex Organic Modification on CNF Filler and Effects on Epoxy Resin Behavior
- Cui, Jianzhong
- Numerical analysis of effect of filtration on removal of inclusions in AA3104 aluminum alloy
- Cui, Quanyi
- Robust optimization for location-routing problem with stochastic demand under facilities failure risk
- Cui, Tiegang
- Research on the Magnetic Properties TP347H Tubes and its High Temperature Oxidation
- Cui, Yang
- Reliability and Sensitive analysis of the Tooth Contact strength Based on Response Surface and Monte Carlo Methods
- Cui, Yu
- Research on Optimization of Aircraft Vertical Tail Stealth Design Based on Airborne PD Radar
- Cui, Yu
- Research on Electromagnetic Scattering Characteristics and Radar Cross Section Reduction of Vertical tail
- Cui, Yu
- Driver’s stress physiological characteristics when front vehicle cut in
- Dai, Fangxin
- Analysis of mechanical characteristics force signal of high voltage circuit breaker
- Dai, Fangxin
- Analysis of mechanical characteristics force signal of high voltage circuit breaker
- Dai, Jiafei
- Nonlinear Granger causality and its application in the analysis of epileptic EEG and ECG signal
- Dai, Jiafei
- Epilepsy signals of each band analysis based on the average phase-synchronization time matrix
- Dai, Weihua
- Analysis of system transient response and its effect on sound speed measurement based on TFCW
- Dai, Weihua
- Comparison of Spectral Characteristics among Some Adjustable Windows
- Dai, Yuanyuan
- Design of Satellite Telemetry Based on PUS under Limited Downlink Channel
- Dama, Jun
- Machining Technology Optimization of Middle-convex and Varying Ellipse Piston Based on Fuzzy Logic
- Deng, Enchang
- Research on measuring system of bulk cargo
- Deng, Hua
- An Intelligent Control for Prosthetic Hand
- Deng, Hua
- Multivariable Fuzzy Control for Prosthetic Hands
- Deng, Yaohua
- Design and Implementation of IP Core of Interactive Projection Gesture Image
- Ding, Hongmin
- Modeling the flow behavior of aluminum alloy 5052