Proceedings of the 62nd International Conference of Machine Design Departments (ICMD 2022)
145 authors
- Agus, Emir Asyraf
- Analysis of output oil yield and energy utilization of bulk pumpkin seeds under constant loading
- Alipour, Ramin
- Effect of Blade Pitch Angle on a 2-Bladed Horizontal Axis Tidal Current Turbine Performance
- Alipour, Roozbeh
- Effect of Blade Pitch Angle on a 2-Bladed Horizontal Axis Tidal Current Turbine Performance
- Arana-Arexolaleiba, Nestor
- LiDAR Localization in Rugged Environment
- Ayatollahi, Majid R.
- A three-dimensional crack under complex loading conditions
- Baheti, Vijay
- Influence of Fly Ash Fillers on Impact Resistance of Epoxy Matrices
- Bronček, Jozef
- Evaluation of tribological properties of thin coatings formed by solid lubricants
- Brumerčík, František
- Mathematical Model of Technical System in SimScape
- Brumerčík, František
- Mathematical analysis of propeller flight simulation
- Buzek, Petr
- Concept design of a power plant using algae biofuels
- Bílek, Petr
- Control unit of the autonomous electric platform
- Cheong, Je Zen
- Analysis of output oil yield and energy utilization of bulk pumpkin seeds under constant loading
- Cyrus, Jindrich
- Vibration Analysis of Multifunctional Laminated Glass Composite Panel
- Cézová, Eliška
- Automated processing of Experimental data and reports using Free Software
- Cýrus, Jindřich
- Concept of autonomous vehicle control and data acquisition
- Dajbych, Oldřich
- Approximate functions for geometric constants of the rectangular cross-section in torsion
- Dynnyk, Oleh
- An innovative solution to optimize ultrasound diagnostics by introducing a portable ultrasound device to the European medical market
- Dynybyl, Vojtěch
- Force Analysis of Bevel Gears in Milling Head Drive and Design of Bearings
- Dzimko, Marián
- Evaluation of tribological properties of thin coatings formed by solid lubricants
- Eichler, Jakub
- BLDC motor analysis in software ANSYS Electronics
- Fardian, Farhad
- Effect of Blade Pitch Angle on a 2-Bladed Horizontal Axis Tidal Current Turbine Performance
- Fiacan, Jakub
- Preparation of synthetic data to be used as inputs for neural network using CAD system
- Fiačan, Jakub
- Mathematical analysis of propeller flight simulation
- Fiačan, Jakub
- Testing of Axleboxes for Railway Vehicles on the TBRB 01 Test Bench in Accordance with EN 12 082
- Gajdošík, Tomáš
- Interpretation of Biomimetic Principles in the Construction Design Process of Small and Light Electric Vehicles
- Gajdáč, Igor
- Interpretation of Biomimetic Principles in the Construction Design Process of Small and Light Electric Vehicles
- Gajdáč, Igor
- Testing of Axleboxes for Railway Vehicles on the TBRB 01 Test Bench in Accordance with EN 12 082
- Gorban, Andriy
- An innovative solution to optimize ultrasound diagnostics by introducing a portable ultrasound device to the European medical market
- Herák, David
- Analysis of output oil yield and energy utilization of bulk pumpkin seeds under constant loading
- Herák, David
- Approximate functions for geometric constants of the rectangular cross-section in torsion
- Hlava, Jaroslav
- Concept of autonomous vehicle control and data acquisition
- Hrcek, Slavomir
- Preparation of synthetic data to be used as inputs for neural network using CAD system
- Hrubošová, Zuzana
- Thermochromic and electrical properties of silica/DEA-CuCl₄ sensory composite
- Hruzik, Lukas
- The differences in geometry modifications methods after topological optimization
- Hruzík, Lukáš
- Decrease in The Roughness of The Shaft Surface During Application of The Clamping Sleeve
- Hrček, Slavomír
- Mathematical Model of Technical System in SimScape
- Hrček, Slavomír
- Mathematical analysis of propeller flight simulation
- Hrček, Slavomír
- Testing of Axleboxes for Railway Vehicles on the TBRB 01 Test Bench in Accordance with EN 12 082
- Hu, Shi
- Sandwich structured carbon fiber composites with enhanced EMI shielding performance
- Hubka, Lukáš
- Development of the Modular DC Fast Charging Station for Electric Vehicles
- Hykl, Josef
- The emission impact of the innovative grate shape in the fireplace stove and comparison with the car
- Ismail, Idris Bin
- Analysis of output oil yield and energy utilization of bulk pumpkin seeds under constant loading
- Jalayer, Reza
- A three-dimensional crack under complex loading conditions
- Jandura, Pavel
- Design of traction battery for autonomous vehicle
- Jandura, Pavel
- Control unit of the autonomous electric platform
- Jenis, Jozef
- Mathematical Model of Technical System in SimScape
- Jenis, Jozef
- Preparation of synthetic data to be used as inputs for neural network using CAD system
- Jenis, Jozef
- Evaluation of tribological properties of thin coatings formed by solid lubricants
- Jozef, Bronček
- Interpretation of New Rules for Using of General Geometric and Dimensional Specifications in Drawings According to International Standard
- Jírová, Radka
- Investigation of Washer Influence on Bolt Connections in Non-Ferrous and Non-Metal Constructions
- Jírová, Radka
- Frequency Regulation of the Clamping Plate in Dynamical Tests
- Kabutey, Abraham
- Analysis of output oil yield and energy utilization of bulk pumpkin seeds under constant loading
- Kabutey, Abraham
- Approximate functions for geometric constants of the rectangular cross-section in torsion
- Kajzr, Daniel
- Concept of autonomous vehicle control and data acquisition
- Kaláb, Květoslav
- Decrease in The Roughness of The Shaft Surface During Application of The Clamping Sleeve
- Kačír, Matúš
- Investigation of temperature change for two flexible pneumatic elements dynamically loaded
- Knobloch, Roman
- Modelling the Winding of Composite Frames for the Automotive Industry
- Koci, Jan
- Vibration Analysis of Multifunctional Laminated Glass Composite Panel
- Koloor, Seyed Saeid Rahimian
- Effect of Blade Pitch Angle on a 2-Bladed Horizontal Axis Tidal Current Turbine Performance
- Konstantová, Viera
- Interpretation of Biomimetic Principles in the Construction Design Process of Small and Light Electric Vehicles
- Kováčik, Patrik
- Mathematical Model of Technical System in SimScape
- Kočí, Jan
- Concept of autonomous vehicle control and data acquisition
- Krajňák, Jozef
- Investigation of temperature change for two flexible pneumatic elements dynamically loaded
- Krcmar, Lukas
- Design of traction battery for autonomous vehicle
- Krejčík, Michal
- Thermochromic and electrical properties of silica/DEA-CuCl₄ sensory composite
- Kremenakova, Dana
- Sandwich structured carbon fiber composites with enhanced EMI shielding performance
- Krónerová, Eva Kubec
- Force Analysis of Bevel Gears in Milling Head Drive and Design of Bearings
- Kubín, Jiří
- Development of the Modular DC Fast Charging Station for Electric Vehicles
- Křížová, Hana
- Thermochromic and electrical properties of silica/DEA-CuCl₄ sensory composite
- Lepsik, Petr
- Resolving a Problem with Cleaning of Tools by the 3I method – a Case Study
- Lepšík, Petr
- Peer-Review Statements
- Lufinka, Ales
- Measurement of Transfer Function during Multi-axis Loading
- Lukac, Michal
- Preparation of synthetic data to be used as inputs for neural network using CAD system
- Lukáč, Michal
- Evaluation of tribological properties of thin coatings formed by solid lubricants
- Mach, Ondřej
- Control unit of the autonomous electric platform
- Mazač, Martin
- Vibration assessment of ski lift gearbox
- Medvecký, Štefan
- Interpretation of Biomimetic Principles in the Construction Design Process of Small and Light Electric Vehicles
- Michal, Pavol
- Mathematical analysis of propeller flight simulation
- Militky, Jiri
- Sandwich structured carbon fiber composites with enhanced EMI shielding performance
- Militký, Jiří
- Influence of Fly Ash Fillers on Impact Resistance of Epoxy Matrices
- Mlýnek, Jaroslav
- Modelling the Winding of Composite Frames for the Automotive Industry
- Moezzi, Reza
- Vibration Analysis of Multifunctional Laminated Glass Composite Panel
- Moezzi, Reza
- Effect of Blade Pitch Angle on a 2-Bladed Horizontal Axis Tidal Current Turbine Performance
- Mário, Drbúl
- Interpretation of New Rules for Using of General Geometric and Dimensional Specifications in Drawings According to International Standard
- Novotná, Jana
- Influence of Fly Ash Fillers on Impact Resistance of Epoxy Matrices
- Novák, Miroslav
- Li-ion Battery Cell Aging Observation based on Impedance Spectroscopy
- Nyrobtseva, Ekaterina
- LiDAR Localization in Rugged Environment
- Němček, Miloš
- Calculation of Coordinates of an Internal Gearing Fillet Manufactured by a Pinion-type Shaper Cutter with Rounded Tip
- Ondriga, Jozef
- Mathematical Model of Technical System in SimScape
- Ondriga, Jozef
- Mathematical analysis of propeller flight simulation
- Ondriga, Jozef
- Preparation of synthetic data to be used as inputs for neural network using CAD system
- Paraska, Olga
- An innovative solution to optimize ultrasound diagnostics by introducing a portable ultrasound device to the European medical market
- Petr, Karel
- Application and Explanation of General Geometrical Tolerances According to ISO 22081
- Petru, Michal
- A Review: Thermoplastic Composites In Aerospace Applications
- Petru, Michal
- Review: Composites Used In Aircrafts
- Petrů, Michal
- Peer-Review Statements
- Petrů, Michal
- Sandwich structured carbon fiber composites with enhanced EMI shielding performance
- Petrů, Michal
- Influence of Fly Ash Fillers on Impact Resistance of Epoxy Matrices
- Pešík, Lubomír
- Investigation of Washer Influence on Bolt Connections in Non-Ferrous and Non-Metal Constructions
- Pešík, Lubomír
- Frequency Regulation of the Clamping Plate in Dynamical Tests