Application and Explanation of General Geometrical Tolerances According to ISO 22081

DOI

10.2991/978-94-6463-423-5_7How to use a DOI?

Keywords

ISO 22081; General Geometric Tolerances; Profile tolerances; Theoretical Exact Dimensions; ISO GPS; 3D annotation model

Abstract

This article is based on new general geometrical tolerances and general size tolerances according to ISO 22081 from year 2021 used in ISO GPS standards. This standard canceled and replaced ISO 2768-2 from year 1989. The main changes are rules for application of general geometrical specification and general size specification have been clarified. This article shall be explaining the principle of creating a drawing or 3D model according to the rules for using general tolerances. All rules are ISO 22081 shall respect all principles defined into ISO 8015 from year 2011. This article explains application of general geometric tolerances or specifications to specific components with detailed descriptions.

Copyright

© 2024 The Author(s)

Open Access

Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

TY  - CONF
AU  - Karel Petr
PY  - 2024
DA  - 2024/05/22
TI  - Application and Explanation of General Geometrical Tolerances According to ISO 22081
BT  - Proceedings of the 62nd International Conference of Machine Design Departments (ICMD 2022)
PB  - Atlantis Press
SP  - 47
EP  - 55
SN  - 2589-4943
UR  - https://doi.org/10.2991/978-94-6463-423-5_7
DO  - 10.2991/978-94-6463-423-5_7
ID  - Petr2024
ER  -