Proceedings of the 4th Forum in Research, Science, and Technology (FIRST-T1-T2-2020)
481 authors
- Abdurahman, W
- Experimental Research of the Influence of Hot Machining Method on AISI 4340 Lathe Machine Process Towards Specific Cutting Energy and Surface Roughness
- Abdurrahman
- Biometric Fingerprint Implementation for Presence Checking and Room Access Control System
- Abidin, Zainal
- Optimization of FDM 3D Printing Process Parameter for Improving Porosity Accuracy of PLA Scaffold
- Abiyyu, Farid Jatri
- Compatibility of Linux Architecture for Diskless Technology System
- Absor, Moch.
- Optimization of Public Trasport Service Bus Papid Transit (BRT) Trans Musi in the City of Palembang
- Adewasti
- Using Night Vision Camera Robot Based on Internet of Thing
- Adipradana, W.
- Datalogger Experimental Analysis Based on Arduino Mega 2560 on a 100 Wp Monocrystalline Solar Panel Using Perforated Plate
- Admirani, Ica
- Model Adaptive Fuzzy Time Series to Forecasting Enrollments of New Student
- Affrilla, Umaidella
- Production of Bio-Pellet Briquettes From Coconut Shell Waste as Alternative Energy for Household Scale
- Agung, M. Zakuan
- Reservoir Irrigation System Design Based Wireless Sensor Network
- Akbar, M. Alief
- Index of Retained Strength and Weight Loss on Flexible Pavement Ac-Wc and Hrs-Wc Using Polymer Products Ethylene-Vinyl-Acetate (EVA) and Styrene-Butadiene-Styrene (SBS)
- Albana, Muhammad Hasan
- Prototype Development of Motorbike Towing Hook Towards Authorized Mechanic Perception and Investigation
- Aldi, Y
- Experimental Research of the Influence of Hot Machining Method on AISI 4340 Lathe Machine Process Towards Specific Cutting Energy and Surface Roughness
- Alhafez, Ricky Ravsyan
- Comparison of the Use of Fly Ash dan Rice Husk Ash in the Making of Geopolymer Concrete
- Ali, Farida
- Effect of Variations Concentration and pH of Liquid Smoke in the Immersion With Various Types of Fish
- Alkausar, Jefri
- Implementation of Fuzzy Logic Type-2 on Mobile Robot Navigation System
- Ami, Hidayati
- Model Adaptive Fuzzy Time Series to Forecasting Enrollments of New Student
- Amin, Jaksen M.
- Effect of Sugar, Ammonium Sulfate and Magnesium Sulfate as Supplementary Nutrients in Coconut Water Fermented by Acetobacter xylinum to Produce Biocellulose Membranes
- Amin, M. Miftakul
- RESTful Web Service as Data Generator for Reporting of Academic Information System
- Amiruddin
- The Effect of Air Pressure on Foamed Mortar Production
- Amperawan
- Trainer Module Design of Item Sorting Equipment Based on Height and Plc-Based Traffic Light Prototype in the System Laboratory
- Amrillah, N
- Optimization of Production Process Parameters of DLP Type 3D Printer Design for Product Roughness Value
- Andre, K
- Production of Green Diesel From Crude Palm Oil (CPO) Through Hydrotreating Process by Using Zeolite Catalyst
- Andriani, Yuli
- Telemetry Design Accuracy of Patient’s Temperature With IoT Approach
- Anerasari, M
- Effect of Temperature on Biofuels Production With Catalytic Cracking Process
- Anisah, Masayu
- New Navigation Strategy for G-Bot
- Aprianty, Desy
- Application of Tracking Letter Disposition at State Polytechnic of Sriwijaya Based on Android Webview
- Apriyanti, Desi
- The Application of Digital Marketing for UKM in Facing the Covid-19 Pandemic
- Ariasya, M A
- The Effect of the Catalyst (NaOH) on the Processing of Waste Used Oil Into Liquid Fuel
- Arifin, Fatahul
- Optimization of Stroke Rehabilitation Hand Component of 3D Printing With Taguchi Method Approach
- Aripriharta
- Increasing Sensitivity of pH Detection Using Computer Vision Based Biosensors
- Aripriharta
- Image Processing System for pH Classification Using Biosensors
- Ariyanti, Indri
- Data Model Pattern for Data Warehouse Web Application of Information Portal
- Arti, Yuni
- Flexural Strength Analysis of Concrete With the Addition B3 Waste as an Additive to Ordinary Portland Cement
- Artini, Sri Rezki
- Bending Test Galvalum Cold Formed Steel Beam With Variation Mortar and Reinforcement Bars
- Aryanti, Aryanti
- The Shortest Path Search Application for Base Transceiver Station (BTS) Using A* Algorithm
- Aryanti, Aryanti
- Compatibility of Linux Architecture for Diskless Technology System
- Asriyadi
- Quality Measurement Evaluation of the POLSRI Learning Management System Website Using Importance Performance Analysis (IPA) Method
- Asrofi, Ibnu
- Prototype of Small Savonius Wind Turbine
- Astuti
- Optimization of FDM 3D Printing Process Parameter for Improving Porosity Accuracy of PLA Scaffold
- Aswan, Arizal
- Catalytic Pyrolysis of High Density Polyethylene (HDPE) and Polystyrene Plastic Waste Using Zeolite Catalyst to Produce Liquid Fuel
- Awwaliyah, Sufi
- Effect of Fermentation Time and Percentage of Moringa (Moringa oleifera) Flour Variations on Vitamin C of Yogurt
- Azdy, Rezania Agramanisti
- Database Design for Child Special Development Institution’s Service Performance E-Dashboard
- Azharuddin
- The Effect of the Catalyst (NaOH) on the Processing of Waste Used Oil Into Liquid Fuel
- Aziz, Faiz Syaikhoni
- Water Quality Monitoring System in Guorami Fish Cultivation Based on Microcontroller
- Aziz, Faiz Syaikhoni
- Development Internet of Things for Water Quality Monitoring System for Gouramy Cultivation
- Aziz, Faiz Syaikhoni
- Increasing Sensitivity of pH Detection Using Computer Vision Based Biosensors
- Aziz, Faiz Syaikhoni
- Image Processing System for pH Classification Using Biosensors
- Aznury, Martha
- Simulation of Silage Production From Water Hyacinth (Eichornia crassipes) as Ruminants Feed Based on the Increase of Aspergillus niger
- Aznury, Martha
- Production of Biodiesel From Unrefined Plants-Derived Oil by Aspergillus oryzae Expressing Bacillus thermocatenulatus Lipase as a Whole-Cell Biocatalyst
- Aznury, Martha
- Effect of Fermentation Time and Percentage of Moringa (Moringa oleifera) Flour Variations on Vitamin C of Yogurt
- Azro, Isnaini
- Model Adaptive Fuzzy Time Series to Forecasting Enrollments of New Student
- Aztri Yuli, K
- Utilization of Residual Sand Materials From the Mining of Kaolin and Tin in Bangka Island on Flexible Pavement Structure
- Azwardi
- Room Safety System Using Face Recognition Using Telegram and Raspberry Pi Based Histogram of Oriented Method
- Azwardi
- Public Service Announcement Implementation of Learning at the Sriwijaya State Polytechnic in Minimizing the Risks and Impacts Caused by the Covid-19 Pandemic
- Bahrin, David
- Processing Plastic Waste HDPE and PP on Pyrolysis Temperature Using Cu-Al₂O₃ Catalyst Into an Alternative Liquid Fuel
- Basri, Hasan
- Optimization of FDM 3D Printing Process Parameter for Improving Porosity Accuracy of PLA Scaffold
- Basri, Hasan
- Fatigue Prediction of Porous Magnesium Bone Scaffold Using Finite Element Method
- Basri, Hasan
- Optimization of Production Process Parameters of DLP Type 3D Printer Design for Product Roughness Value
- Basri, Hasan
- Simulation-Based Analysis on Novel Vacuum Actuation Concept for Soft Robotic Finger Development
- Basri, Hasan
- Failure Analysis and Performance Assessment of Tubular Air Heater at PLTU South Sumatra V
- Basri, Hasan
- Biometric Fingerprint Implementation for Presence Checking and Room Access Control System
- Bella Madu, I
- Utilization of Residual Sand Materials From the Mining of Kaolin and Tin in Bangka Island on Flexible Pavement Structure
- Bimo Brata, A
- Utilization of Residual Sand Materials From the Mining of Kaolin and Tin in Bangka Island on Flexible Pavement Structure
- Bizzy, I.
- Datalogger Experimental Analysis Based on Arduino Mega 2560 on a 100 Wp Monocrystalline Solar Panel Using Perforated Plate
- Bow, Yohandri
- The Purification of Biogas with Monoethanolamine (MEA) Solution Based on Biogas Flow Rate
- Bow, Yohandri
- Filtration and Electrocoagulation as a Combined Process for Electroplating Wastewater
- Bow, Yohandri
- Study of Temperature and Use of Catalysts in the Pyrolysis of LDPE Plastic Waste on the Quantity of Oil Fuel Products Produced
- Bow, Yohandri
- Monitoring Depth of Discharge of a Valve Regulated Lead Acid Battery in a Standalone PV System
- Bow, Yowhandri
- Prototype Development of Heartbeat and Body Temperature Monitoring System Based on Internet of Things
- Caesarendra, Wahyu
- Prototype Development of Motorbike Towing Hook Towards Authorized Mechanic Perception and Investigation
- Caesarendra, Wahyu
- Investigation Study of Pressure Different Effect at Evaporator in Organic Rankine Cycle Simulator (ORCS) Using Low-grade Waste Heat
- Carlos, RS
- The Effect of Parameter Process 3D Printer Technology Digital Light Processing to Geometric of Shaft
- Carlos, RS
- The Severity of Polluted Insulator Surface Based on the Leakage Current Harmonic Measurements
- Chodijah, S
- Oil Palm Empty Bunches as an Alternative Raw Material for Making Bioplastics
- Ciksadan
- Design of Electronic Instruments as Tools Air Pollution Detection
- Cofriyanti, Ervi
- RESTful Web Service as Data Generator for Reporting of Academic Information System
- Coniwanti, Pamilia
- Processing Plastic Waste HDPE and PP on Pyrolysis Temperature Using Cu-Al₂O₃ Catalyst Into an Alternative Liquid Fuel
- Cundari, Lia
- Effect of Variations Concentration and pH of Liquid Smoke in the Immersion With Various Types of Fish
- Daniar, Rima
- Effect of Bentonite on the Yield and Composition of Products From Thermolysis of Polystyrene Waste
- Daniar, Rima
- Catalytic Pyrolysis of High Density Polyethylene (HDPE) and Polystyrene Plastic Waste Using Zeolite Catalyst to Produce Liquid Fuel
- Daniar, Rima
- Effect of Sulfonation Temperature and Time on the Preparation of Methyl Ester Sulfonate Surfactant From Crude Palm Oil (CPO) Based Methyl Ester
- Darlies, Meiyi
- Designing Student and Lecturer Attendance System Application Using Progressive Web Apps (PWA)
- Darmawi
- Fatigue Prediction of Porous Magnesium Bone Scaffold Using Finite Element Method
- Debby Permata, Y
- Index of Retained Strength and Weight Loss on Flexible Pavement Ac-Wc and Hrs-Wc Using Polymer Products Ethylene-Vinyl-Acetate (EVA) and Styrene-Butadiene-Styrene (SBS)
- Destriani, Rahma
- Search Software for Ustadz, Categories: Preacher, Qari and Qariah in Palembang Using an Android-Based Usability Approach
- Destriani, Rahma
- Designing a Web-Based Online Tutoring Application in Palembang City Using the SUS (System Usability Scale) Method
- Deviana, Hartati
- Designing Student and Lecturer Attendance System Application Using Progressive Web Apps (PWA)
- Dewi, Erwana
- Effect of Sugar, Ammonium Sulfate and Magnesium Sulfate as Supplementary Nutrients in Coconut Water Fermented by Acetobacter xylinum to Produce Biocellulose Membranes
- Dewi, Tresna
- The Investigation of Sea Salt Soiling on PV Panel
- Dewi, Tresna
- Real-Time Wireless Concept of Vehicle to Vehicle Charging System
- Dinata, Perdana
- Simulation-Based Analysis on Novel Vacuum Actuation Concept for Soft Robotic Finger Development
- Duy, Tran Huy
- Increasing Sensitivity of pH Detection Using Computer Vision Based Biosensors
- Duy, Tran Huy
- Image Processing System for pH Classification Using Biosensors
- Dyos, S
- Experimental Research of the Influence of Hot Machining Method on AISI 4340 Lathe Machine Process Towards Specific Cutting Energy and Surface Roughness
- Effendi, Sairul
- The Effect of Induction Heating on Tensile Test Specimens’ Clamping Products Through the Medium Carbon Steel Materials’ Engineering Technique
- Effendy, Sahrul
- Effect of Bentonite on the Yield and Composition of Products From Thermolysis of Polystyrene Waste
- Elbi Zalita, PB
- Production of Green Diesel From Crude Palm Oil (CPO) Through Hydrotreating Process by Using Zeolite Catalyst
- Endri, Jon
- Design of Electronic Instruments as Tools Air Pollution Detection
- Erlinawati
- Production of Green Diesel From Crude Palm Oil (CPO) Through Hydrotreating Process by Using Zeolite Catalyst