Proceedings of the 2018 8th International Conference on Manufacturing Science and Engineering (ICMSE 2018)
420 authors
- Ao, Weidong
- Study on positoning precision for moving vehicle with different tag-sensor arrangement patterns
- Bai, KeRan
- Design and Implementation of intelligent storage system
- Bao, Haitao
- Simulation and Optimization of Discharging Process of Powder Material Suction Vehicle Based on Fluent
- Cai, Hao
- Applying ZigBee Technology to the Design of Marine Engine Room Monitoring Systems
- Cao, Ling
- Free Form Surface Five-axis 3D Printing
- Cao, Tianze
- Effect of aging mode on the IMC growth of SAC(305)/Cu solder joints during aging
- Cao, Tianze
- Effect of reflow cycles on interfacial morphology of Sn-3.0Ag-0.5Cu/Cu soldered joints during solid-state aging
- Chang, Jiangxue
- The Development of Steering Control Strategy on Engineering Vehicles Steer-by-Wire System
- Chang, Xiaohui
- Research of Power Consumers Behavior Using Fuzzy C-means Algorithm
- Chao, Yi
- Study on Data Synchronization Technology of Non-contact Coordinate Measurement Machine
- Chen, Changzheng
- UAV intelligent system for patrol missions
- Chen, Haiquan
- Development and classification of Heave Compensation Technology
- Chen, Haiquan
- Analysis of pulsation of linear hydraulic motor
- Chen, Haiquan
- Strength Analysis of ship Anti-heeling Airbag Connector
- Chen, Ke
- The Kernel Regression Method Based on the Multiplicative Model to Reduce Speckle for SAR image
- Chen, Li
- Low Error Detection in Image Watermarking Using DCT
- Chen, Lixin
- Design of the Pneumatic Device of the Some Type of the Laminator
- Chen, Longbo
- 3D film viewer development and trial
- Chen, Lu
- Study on Vacuum Welding Process of Slab Laser Module
- Chen, Lumin
- Structural Design of a Novel Wearable Knee Exoskeleton
- Chen, Minshi
- Determination of five amides in food contact materials by GC/MS
- Chen, Ping
- A Study on the monitoring system of undergraduates' running exercise based on Android platform
- Chen, Siyu
- Study on the Technologies of Close Range Photogrammetry and Applications in the Manufacture of Aviation
- Chen, Tao
- Research on VM Dynamic Scheduling in Cloud Environment
- Chen, X.M.
- Torsional displacement ratio of frame-tube structure under expected rare earthquake
- Chen, Xi
- A High Speed Amplifier Used in High-resolution GSPS Pipelined ADC
- Chen, Xiaochen
- Numerical simulation of heat transfer between low pressure pipeline of pre-mixed abrasive water jet system and low temperature environment
- Chen, Xing
- Failure Analysis on Input Gear of a Gearbox
- Chen, Xiqu
- The Design and Simulation on DP-QPSK Demodulation Device Based on MMI
- Chen, Yadie
- Study on Instability Probability of Xiaya River Slope Based on Monte-Carlo Method
- Chen, Yadie
- Study on the Influence of Soil Moisture Content on the Probability of Landslide Instability
- Chen, YiXian
- Design and Implementation of intelligent storage system
- Chen, Yuejun
- Assembly Sequence Planning Based on Discrete Bat Algorithm
- Chen, Zhongjun
- Strengthening Maintenance Quality Control of Components to Improve the Reliability of B737NG Airplane Pneumatic System
- Chen, Zuyi
- Infrared Harbor Background Suppression based on Multistage filtering and Phase Grouping
- Cheng, Jianglin
- Research of Automatic Adjusting Underwater Sludge Discharge Regulator
- Cheng, Jianhua
- TEMPO-mediated oxidation of Flammulina velutipes mycelia for fabrication of transparent tension chitin membranes
- Cheng, Kun
- Coupling charge blasting research
- Cheng, Kun
- Research and analysis of uncoupled charge blasting
- Cheng, Qingsi
- Hertz Contact Problem Treated by Isogeometric Analysis
- Cheng, Shuang
- Development of data acquisition system for digital display and measurement tools based on Bluetooth
- Cheng, Zhen
- Determination of five amides in food contact materials by GC/MS
- Cui, Yan
- Effect of aging mode on the IMC growth of SAC(305)/Cu solder joints during aging
- Cui, Yan
- Effect of reflow cycles on interfacial morphology of Sn-3.0Ag-0.5Cu/Cu soldered joints during solid-state aging
- Dai, Juntao
- Research of the Penetration Process for Concrete Target Based on the Finite Element Method
- Deng, Hailong
- Analysis of Temperature Field in Auto Starter Based on FEM
- Deng, Hongwei
- The Application of Data-driven Modelling and State Monitoring in Steam Pipe Networks in Iron& Steel Enterprises
- Deng, Huiqiong
- A Method of Evaluating Cascading Tripping in Power Grid Considering the Action of the Relay Protector and the Nodal Injection Power
- Deng, Sijia
- Study on Instability Probability of Xiaya River Slope Based on Monte-Carlo Method
- Deng, Sijia
- Study on the Influence of Soil Moisture Content on the Probability of Landslide Instability
- Deng, Si’er
- Performance analysis of graphene modified porous oil retainer materials
- Deng, Si’er
- Development of high performance self-Lubricating spherical plain bearings and their friction and wear properties
- Ding, Baodong
- Numerical Simulation on displacement mechanism of fracture-cave reservoir surfactant-Assisted N2 huff and puff in Tahe Oilfield
- Ding, Pengfei
- Study on Anti-sway Performance of V-shaped Structure of 50t Multipurpose Gantry Crane
- Ding, Qi
- Simulation of temperature induced colorimetric shift of environmentally friendly ZnAgInSe Quantum Dots
- Duan, Hailong
- Vision-based Hand Gesture Recognition for Mobile Service Robot Control
- Duan, J.
- Torsional displacement ratio of frame-tube structure under expected rare earthquake
- Duan, Jimiao
- Numerical simulation of heat transfer between low pressure pipeline of pre-mixed abrasive water jet system and low temperature environment
- Fan, Binghui
- Optimal design of the air-balancing device for the rear arm of anti terrorist and riot robot
- Fan, Min
- Design of CNC Pneumatic Measuring Instrument Monitoring System Based on Configuration Collaborative
- Fan, Qinman
- Simulation and Optimization of Discharging Process of Powder Material Suction Vehicle Based on Fluent
- Fan, Yanqi
- Coupling charge blasting research
- Fan, Yanqi
- Research and analysis of uncoupled charge blasting
- Fang, Chao
- The Design and Simulation on DP-QPSK Demodulation Device Based on MMI
- Feng, Jianhua
- Study on Instability Probability of Xiaya River Slope Based on Monte-Carlo Method
- Feng, Jianhua
- Study on the Influence of Soil Moisture Content on the Probability of Landslide Instability
- Feng, Peifeng
- Influence Factors and Microstructures of Machined Surface in Electrical Discharge Machining for SiCw/2024 Aluminium Matrix Composite
- Feng, Xuezhi
- The establishment of three dimensional test model
- Feng, Xuezhi
- Development of data acquisition system for digital display and measurement tools based on Bluetooth
- Fu, Dongbin
- A High Speed Amplifier Used in High-resolution GSPS Pipelined ADC
- Gan, Liangzhi
- Capturing Four Typical Eye Movement Signals Hidden in Electroencephalograph
- Gao, Binsen
- Research of the Penetration Process for Concrete Target Based on the Finite Element Method
- Gao, Qiwei
- Power Window Anti-Pinch Control Based on Hall Pulse Signal and Mechanical Power
- Gao, Xingyu
- Design Method of the Measuring System for the Mirror Surface Spacing of a compound lens
- Gao, Yu
- Research on the Production Process Optimization of Special Shaped Parts of Wood Furniture and Automatic Milling Technology
- Gong, Qinghong
- Rigidity Evaluation Model for Aircraft Structural Parts Web Based on Beam Bending Theory
- Guan, Jinfa
- Numerical simulation of heat transfer between low pressure pipeline of pre-mixed abrasive water jet system and low temperature environment
- Guo, Fei
- The Data Fitting of Motor Back-to-Back Test Based on Least Square Method
- Guo, Jilin
- 3D film viewer development and trial
- Guo, Junhong
- Research on Data Redundancy and Query Efficiency of Helicopter Database System
- Han, Jie
- Monitoring the deformation of the metal aluminum film with glass substrate based on DSCM
- Han, Pengfei
- UAV intelligent system for patrol missions
- Han, Wei
- Power Window Anti-Pinch Control Based on Hall Pulse Signal and Mechanical Power
- Han, Wenjie
- Assembly Sequence Planning Based on Discrete Bat Algorithm
- Han, Yulong
- Research of Power Consumers Behavior Using Fuzzy C-means Algorithm
- Hao, Kunpeng
- Hertz Contact Problem Treated by Isogeometric Analysis
- Hao, Xiayi
- Research of Informatization Solutions in Class Management
- Hao, Xiayi
- Research of Power Consumers Behavior Using Fuzzy C-means Algorithm
- Hao, Xue
- Study on Data Synchronization Technology of Non-contact Coordinate Measurement Machine
- He, Junjian
- On Research Progress and Development Trend for Motion Control Problems of Industrial Robots
- He, Tao
- Research of Power Consumers Behavior Using Fuzzy C-means Algorithm
- He, YangYuZi
- Design and Implementation of intelligent storage system
- Hou, Jingfeng
- Study on Instability Probability of Xiaya River Slope Based on Monte-Carlo Method
- Hou, Jingfeng
- Study on the Influence of Soil Moisture Content on the Probability of Landslide Instability
- Hou, Yu
- Aerodynamic Analysis of Three-Section Flapping Wing by Numerical Simulation
- Hu, Jianhua
- Study on Anti-sway Performance of V-shaped Structure of 50t Multipurpose Gantry Crane
- Hu, Jianhua
- Study on Disassembly Scheme of Large Diameter Shield Machine
- Hua, Zhaomin
- Aerodynamic Analysis of Three-Section Flapping Wing by Numerical Simulation
- Huang, Hong
- An efficient SAT algorithm for complex job-shop scheduling
- Huang, Jian
- Research on DC motor speed control system based on PID