Proceedings of the 7th FIRST 2023 International Conference on Global Innovations (FIRST-ESCSI 2023)
58 articles
Proceedings Article
Peer-Review Statements
Nyayu Latifah Husni, Wahyu Caesarendra, Martha Aznury, Leni Novianti, Deris Stiawan
All of the articles in this proceedings volume have been presented at the [FIRST IC 2023] during [30-31 October 2023] in [Palembang, Indonesia]]. These articles have been peer reviewed by the members of the [Scientific Committee] and approved by the Editor-in-Chief, who affirms that this document is...
Proceedings Article
The Classification of Coronary Artery Disease Using A Machine Learning Approach: A Preliminary Study
Ahyar Supani, Siti Nurmaini, Radiyati Umi Partan, Bhakti Yudo Suprapto
Coronary heart disease (CAD) is the world’s leading cause of death. Early detection of this condition is critical. Diagnosis with visual images through examination with angiography techniques is the current gold standard. However, this technique causes side effects, so it is necessary to carry out alternative...
Proceedings Article
Wireless Communication Design with Omron Type CP1L-E Programmable Logic Control Using TPI-Link WA901ND Access Point
Siswandi Siswandi, Sholihin Sholihin, Heri Liamsi, Eka Susanti, M. Hanif Fatin, M. Afif
Programmable Logic Controller is electronic equipment that operates digitally, which uses programmable memory to store internally for specific function instructions. In the process of transmitting PLC data, it still uses cables or cannot use wireless because the PLC itself does not have wireless. To...
Proceedings Article
Semi-Automatic Dyeing Tool for Palembang Typical Natural Fibre Jumputan Batik Fabric Based on Internet of Things
Sholihin Sholihin, Adewasti Adewasti, Eka Susanti, Siswandi Siswandi, C. G. M. Ridho, C. Venous
The development of cloth at this time is creating various types of fabric products. Of the various decorative fabrics that have been made for daily needs using machine tools, one of the tools used is a tool for making printed fabrics. One example of printed fabric is tie dyed fabric or jumputan fabric...
Proceedings Article
Characterization of Syngas Gasification of Coal and Sugarcane Bagasse with a Downdraft Type Gasifier
Aida Syarif, Abu Hasan, Ahmad Taqwa, M. Harry Kurniansyah
The increasing population growth of a country causes an increase in energy consumption, high energy consumption also has an impact on environmental conditions. Greenhouse gases (GHG) are problems that arise with the use of conventional energy. In 2030 Indonesia will reduce GHG by 29%. Efforts are being...
Proceedings Article
Control System Design for Information and Data Communication Video Booth 360° Using Internet of Things Media
H. Irawan, Abdul Rakhman, Siswandi Siswandi, R. A. Halimahtussa’diyah, A. Reynaldi
The art of videography has developed over time. Starting with the discovery of the photographic camera and siluloid film in the 16th century. The discovery of the photographic camera and celluloid film came from a wooden box, and in the box there was an obscure lens. The obscure lens is a small hole...
Proceedings Article
Appropriate Technology for Palm Sugar Choppers Based on the Internet of Things
Adewasti Adewasti, Sarjana Sarjana, Ibnu Ziad, Sholihin Sholihin, Eka Susanti, Filzah Hafila
Gula aren, or gula merah, or gula kawung is a sweetener made from nira derived from the male flower clusters of the sugar palm tree. Palm sugar is usually also associated with any type of sugar made from nira, which is the liquid released from the flowers of trees from the palm family, such as coconut,...
Proceedings Article
Correlation of Compressive Strength of Cylindrical Specimens with Reinforced Concrete Slabs Cast in the Field
Ika Sulianti, Amiruddin Amiruddin, Agus Subrianto, Rachmat Hakiki, Cindi Septi Yandri, Aprilia Meana Putri
The concrete construction work process usually has many factors that influence the quality of the concrete, starting from various methods of preparing materials to caring for the concrete. This occurs because of the differences in treatment given to samples in the laboratory and workpieces made in the...
Proceedings Article
Analysis of Damage Level of Flexible Pavement on the May Zen Road Section, Kalidoni District, Palembang
Lina Flaviana Tilik, Ayu Marlina, Yusril Yusri, Suhadi Suhadi, Bastoni Bastoni, Tri Kurnia, Nurul Aina Syahira, Aldila Anissa, Mesi Utami
The road served as a ground transportation infrastructure to connect one place to another in order to facilitate economic, social, and cultural activities. Good road conditions make it easier for the population to move around for economic and social interactions. However, road damage not only hinders...
Proceedings Article
The Use of Red Brick Powder and Fly Ash As Filler On Asphalt Concrete - Binder Course
Ika Sulianti, Agus Subrianto, Anna Elvaria, Nafisa Tri Maulinda, Dhea Rizkika Sakinah
Road pavement planning is one of the determining factors in creating safe road infrastructure. One type of asphalt that is commonly used is flexible pavement with a surface layer of asphalt concrete (Laston). To increase the durability of road pavement, this can be done by making changes to the physical...
Proceedings Article
Effect of Adding Polypropylene Fibers to Concrete Mixtures
Lina Flaviana Tilik, Suhadi Suhadi, Bastoni Hassasi, Sri Rezki Artini, Nurul Aina Syahira, Tri Kurnia Rahayu, Ayu Marlina, Ahmad Riezki
Building constructions found in Indonesia generally use concrete as the main structural material. Even though it has advantages, concrete also has disadvantages in its use, namely that concrete has brittle properties so that it is practically unable to withstand brittle tensile stress. There are many...
Proceedings Article
The effect of Drying Temperature in Making Edamame Soy Milk (Glycine max (L.) Merr.) on Water, Fat, and Protein Content Based on SNI with Ginger Flavored Superfood Drink Products (Zingiber officinale)
Siti Chodijah, Sofiah Sofiah, Melantina Oktriyanti, Erika Dwi Oktaviani, Meliana Putri, Syahira Arita Rozaquni, Cahya Azizah
Business development in the food and beverage industry cannot be separated from food innovation, which can increase added value. One of the food industries that is growing rapidly in the bean-based food processing industry is edamame soybeans (Glycine max (L.) Merr). Edamame has many health benefits,...
Proceedings Article
Identification of Flood Distribution Per District Based on GIS in Palembang City
Rahmad Hidayat Saputra, Indrayani, Ahmad Mirza, Ahmad Najib, M. Agung Prakoso, Wenda Latifah Anjani
Palembang City is one of the largest and most populous cities on the island of Sumatra, Indonesia. The topography of the Palembang City area is mostly lowland, which is one of the causes of frequent flooding, especially when rainfall is high, so the potential for hydrometeorological disasters in the...
Proceedings Article
Production of Biodiesel From Nyamplung Oil (Calophyllum inophyllum) Using Immobilized Lipase Enzyme Catalyst with Variation of Temperature and Number of Cycles in A Packed Bed Reactor
Martha Aznury, Mareta Putri, Desti Nur Wahyunita, Siske Alfatiya, Idha Silviyati, Ira Gusti Riani, Marta Tika Handayani, Robert Junaidi, Ahmad Zikri
Biodiesel, Minyak Nyamplung, Enzim Lipase Amobil, Packed Bed Biodiesel is a type of fuel made from a mixture of mono-alkyl esters of long-chain fatty acids. It is used as an alternative to diesel fuel and is produced from renewable sources such as vegetable oil or animal fat. The biodiesel production...
Proceedings Article
Analysis of Rainwater Harvesting System for 36-Type House in Palembang City as an Alternative for Clean Water Supply
Lily Endah Diansari, Radius Pranoto, Zainuddin Zainuddin
The increase in population resulted in an increased need for housing. Opening up land for housing development worsened runoff by reducing vegetation that covered the soil. The areas that underwent land clearing were at risk of experiencing a shortage of clean water supply for household needs during the...
Proceedings Article
Characteristics Of Mangostein (Garcinia Mangostana L) Peel Extract Paper Soap With The Addition Of Glycerin And Hydroxypropyl Methyl Cellulose
Idha Silviyati, Endang Supraptiah, Aina Fathiah, Adi Syakdani, Aisyah Suci Ningsih, Selastia Yuliani
Paper soap is a unique soap product innovation in the form of thin sheets resembling paper. Mangosteen peel contains xanthone compounds, which are considered to have antioxidant and anti-inflammatory properties. Mangosteen peel also contains flavonoids, tannins, and saponins. This research aims to determine...
Proceedings Article
The Effect Of Adsorbtion And Drying Of Natural Color Of Red Spinach (Amaranthus tricolor) On The Manufacturing Of Soybean Flour On Antioxidant Value
Sofiah Sofiah, Ibnu Hajar, Jaksen M. Amin, Apri Mujiyanti, Nova Humairoh, Delian Aupanisa Riskiah, Satria Agung Wijaya
Increasing the content of food and beverage products cannot be separated from food innovations that can increase the added value of becoming superfood products. One of them is soybeans, which can be processed into products in the form of vegetable flour that comply with SNI standards. Superfood is for...
Proceedings Article
Automatic Transfer Switch System for Controlling the Energy Utilization in Greenhouse Mobile Robot using Neural Network Algorithm
Renny Maulidda, Pola Risma, Tresna Dewi, Andika Wijaya
A greenhouse is a building specifically designed to cultivate plants in both conventional plants with soil media and modern cultivation. However, there are problems that must be faced, such as the disturbance of pests. It requires a mobile robot that can monitor and secure the plants. The purpose of...
Proceedings Article
Optimization of CFD Simulation of Mixer Machine for Liquid Soap Machine with Capacity of 160 Liters
Fatahul Arifin, Yusuf Dewantoro Herlambang, Irawan Malik, Yahya, Eka Satria Martomi, Habib Sultan, M. Amir Alfayyid
Liquid soap plays a very important role in people’s lives, but if the manufacturing process is not done well it will have fatal consequences, such as in the process of making liquid soap in SMEs (Small and Medium Enterprises) many still do it manually or semi-automatically, the target users are small...
Proceedings Article
The identification of retention ponds for flood management in Palembang City
Sudarmadjii Sudarmadji, Indrayani Indrayani, Norca Praditya, Vionadwiuchtia Idrat, Yunus Siahaan
Retention ponds have the function of temporarily storing water from the drainage system before it flows into the river so that it can reduce flood peaks. In the Palembang area there are 49 retention ponds based on data from the Palembang City PUPR Service, but after investigating it turns out there are...
Proceedings Article
The Study of Compressive Strength of Wall Panels with a Mixture of Used Tire Rubber Waste and GRC
Ahmad Syapawi, Multilawati Nasution, Sheragizca Yolanda Situmeang
The utilization of used tire rubber waste, particularly in the construction industry, becomes a critical issue in Indonesia due to its abundant presence and the challenges related to waste disposal. One solution to repurpose used tire rubber waste into a valuable resource, especially in the construction...
Proceedings Article
Identification of the Movement State Polytechnic of Sriwijaya Student’s Journeys
Paramitha Syafarina, Indrayani Indrayani, Andi Herius, Darma Prabudi
Palembang is one of the cities in South Sumatra that has experienced rapid growth in the fields of education, industry, and tourism. There are several universities in Palembang, both public and private. One of the universities in Palembang is the State Polytechnic of Sriwijaya. The movement of student...
Proceedings Article
Internet of Things (IoT) – Based for Noise Detection and Alert Notification in the Library
Renny Maulidda, Abdurrahman Abdurrahman, Agum Try Wardhana, Muhammad Amri Yahya
Libraries are facilities available in education that can support the creation of quality education. In order to focus and concentrate when reading books or doing activities in the library, visitors certainly need an atmosphere that is quiet, comfortable, and less noisy. Based on State Minister of Environment...
Proceedings Article
Performance Analysis of Public Transport Feeder Light Rapid Transit (LRT) Palembang South Sumatra
Wardatul Jamilah, Tody Amanah
Feeder is transportation that serves parts of the city that are beyond the reach of the BRT/LRT/MRT transportation system or transportation above it and is not connected to the system. This study is intended to assess the performance of feeder public transportation. As for the performance assessment...
Proceedings Article
Smart Trash Box Technology of Computer Vision to Support Ecogreen Campus
Husnawati Husnawati, Ahmad Bahri Joni Malyan, Rian Rahmanda Putra, Suzan Agustri
Waste from daily human activities which is one of the causes of natural disasters such as floods. Research on the environment, especially on technology and environmental waste management systems, is still ongoing. Waste management includes organic waste and non-organic waste. The problem that occurs...
Proceedings Article
Analysis of Financing for the Construction of Puzzle Houses by Polsri in an Effort to Provide Affordable Housing for Low-Income Communities
(Case Study of the Construction of the Polsri Puzzle House Mockup)
Hendi Warlika Sedo Putra, Ahmad Syapawi, Doni Sastra, Ria Dwi Putri
The 1945 Constitution Article 28 paragraph (1) letter H and Law No. 1 of 2011 explicitly state that housing is a basic right of citizens, and the government guarantees and ensures that housing is decent and affordable. This is undoubtedly a challenge for the government and the people, considering Indonesia's...
Proceedings Article
Evaluation of the Parking Space Capacity of Two-Wheeled Vehicle at the State Polytechnic of Sriwijaya
Yusri Bermawi, Nadra Mutiara Sari, Dimas Ariezky Susetyo, Fany Fadhila, Ruspina Idella Ompusunggu
Changes in land functions at the State Polytechnic of Sriwijaya, which was originally a parking lot turned into buildings or other facilities, caused a lack of adequate parking area capacity. Therefore, it is necessary to analyze the parking space units in the campus area. The purpose of this research...
Proceedings Article
Evaluation of Service at the Demang Lebar Daun Intersection in Palembang City
Kosim Kosim, Dimas Ariezky Susetyo, Dhevi Mulyanda, Nadra Mutiara Sari
Intersections are a part of the road that becomes the center of conflict points from various directions of traffic flow. The Demang Lebar Daun intersection is a meeting of four roads that have different geometric conditions. At the observation location, traffic flow conditions during peak hours cause...
Proceedings Article
Assessment of the Co-firing in a Portable Boiler Using Rice Husk Biopellets and Sub-bituminous Coal
Rusdianasari Rusdianasari, Leila Kalsum, Abu Hasan, Hengky Saputra, Riztamala Diana, Akhmad Rizal
Rice husks can be used to produce biopellets that can be co-fired in steam power plants. Performance testing investigations on portable boilers, using combinations of sub-bituminous coal and rice husk biopellets with varying ratios of 100%:0%, 95%:5%, and 85%:15%, reveal that the highest values are achieved...
Proceedings Article
Organic Toilet (Torganic) Solution for Utilizing Waste Into Organic Fertilizer in the Shuji Lake Tourism Area
Martha Aznury, Ahmad Zikri, Anerasari Meidinariasty, Darma Prabudi, Hengki Rosadi, Renato G. Reyes
Research road map for collaboration with Pertamina EF 2 Prabumulih partners by utilizing organic waste from organic toilets into organic fertilizer for Sriwijaya State Polytechnic through a Research Master Plan (RMP), one of which is focused on technology and utilization of organic waste. Reducing the...
Proceedings Article
Co Digestion of Tofu Industry Liquid Waste with Cow Manure to become Biogas in a Fixed Dome Biodigester
Leila Kalsum, Rusdianasari Rusdianasari, Aida Syarif, Yordan Hasan, Aan Ade Putra, Mitha Pratiwi
one source of material that has high potential to be proceed become biogas is tofu liquid waste.The composition of tofu liquid waste mostly consist of dissolved and insoluble solid particles amounting to 0,1%. Solid particles of organic substances (± 70%) and inorganic substances (± 30%). Organic substances...
Proceedings Article
Adding Latex And Fly Ash In Asphalt Concrete - Wearing Course Mixture
Ibrahim Ibrahim, Arfan Hasan, Ika Sulianti, Rahmad Hidayat Saputra, Dimitri Yulianti, Anna Elvaria, Feby Rizky Amanda, Ikhsania Irna Ningsih
The road surface layer must be able to withstand the loads and be resistant to changes in conditions and the surrounding environment, so good-quality pavement mix planning is required. Latex as an additive is expected to improve the characteristics of road pavement, while fly ash from coal contains pozzolan...
Proceedings Article
Design And Implementation of Smart Infusion Pump For Telemedicine
Ade Silvia Handayani, Nyayu Latifah Husni, Ahmad Taqwa, Jon Endri, Mega Mardiani, Wahyu Caesarendra
This work focuses on the research and creation of smart syringe pumps for use in telemedicine applications. Delivery of fluids into the patient’s body, including medications and nutrients, in a controlled environment is an important prerequisite for treatment that requires precise flow control. Telemonitoring...
Proceedings Article
Design of Gayo Arabica Coffee Pulper Based on the Internet of Things
Sailon Sailon, Adian Aristia Anas, Didi Suryana, Rangga Betra Pratama, Dwi Akbar Anugrah, Tri Saputra
Separating or peeling coffee fruit from its pulp is an important stage in producing coffee beans before dried under the sunlight. In Gayo highland, The Province of Aceh, UMKM M. Nur Hasan is one of producers or businessmen in processing gayo arabica coffee fruits to produce gayo arabica coffee beans....
Proceedings Article
Smart Charging Model Design with ACO Algorithm for Determining Current Charging Pattern
Selamat Muslimin, Zainudin Nawawi, Bakti Yudo Suprapto, Tresna Dewi
The electric car battery-charging system significantly affects the quality of battery usage and charging time. Therefore, we need smart charging which can determine the optimal battery-charging pattern to produce a fast and controlled charging system. This study discusses the implementation of an Ant...
Proceedings Article
Google Scholar Crawling for Constructing Research Database
M. Miftakul Amin, Adi Sutrisman, Yevi Dwitayanti
This study aimed to compile a research database originating from the Google Scholar dataset using crawling or scraping techniques. The results of the crawl showed that a total of 403 lecturers and researchers at the Sriwijaya State Polytechnic were successfully collected and all 9,511 scientific publications...
Proceedings Article
Extracting the Recommended Features from the Elementary School Student Dataset through Exploration Data Analysis (EDA)
Devi Sartika, Febie Elfaladonna, Indra Griha Tofik Isa, Andre Mariza Putra
Exploratory data analysis (EDA) is an important stage in a data science cycle. In this research, the EDA process is carried out on the elementary school student dataset derived from the student “interest” and “talent” questionnaires. The purpose of this research is to find recommended features that will...
Proceedings Article
Exploration of Virtual Reality Technology Implementation in the Mobile Application of Balaputra Dewa Museum
Hetty Meileni, Yulia Hapsari, Ferizka Tiara Devani, Aditya Cahya Nugraha, Miftahul Jannah, Rizky Firdaus
A museum is a repository that showcases valuable collections encompassing historical artifacts, art, and scientific exhibits, intended to capture the attention of the general public. However, to gain a deeper understanding of the historical collections within a museum, often a more profound exploration...
Proceedings Article
Digital Application For Promotion Palembang Carving Art
Arsia Rini, Yulian Mirza, Nurlaili Rahmi
Digital applications represent one of the current technologies gradually making their mark in the business industry. These applications can significantly enhance the efficiency and ease business professionals conduct various activities. However, a challenge in this realm lies in harnessing digital applications...
Proceedings Article
Collaboration of Business Process Modeling Notation and Rational Unified Process in Blended Learning System Development
Muhammad Aris Ganiardi, Nita Novita, Delta Khairunissa, Elqory Ceasardy, Fefi Aprista, Visi Atira Karunia Prima
The blended learning system, or what is known as hybrid learning, is a good learning method to use after the COVID-19 pandemic. This learning is flexible and not only focuses on face-to-face learning in class but can also carry out the learning process anywhere. The use of information technology such...
Proceedings Article
Web-Based Management Information System PT. Bach Multi Global By Using The Design Thinking Approach Method
Indri Ariyanti, Herlinda Kusmiati, Kurniati
The increasing use of information technology has encouraged every organization to be able to utilize technology in carrying out various activities electronically. The increasingly rapid development of information technology, especially in the field of information systems, is a challenge for companies...
Proceedings Article
Monolithic Architecture Integrated Web Application School Educational Management Information System
Zulkarnaini Zulkarnaini, Ida Wahyuningrum, Ayu Octarina
The implementation of a school education management information system (MIS) will help ensure the continuity of the learning process in schools. School education MIS provides information to support school management decisions, assist the academic process, and distribute information to parents and the...
Proceedings Article
Rebranding Visual Identity to Support the Promotion of Rumah Batik Serasan using the Thingking Design Method
Meiyi Darlies, Hidayati Ami, Ema Laila, Hartini, Laeli Dewi Azizah, Masyrof Syihab, Ikhthison Mekongga, Aryanti Aryanti
Some challenges cannot be avoided, and there is increasingly fierce competition makes business actors compete to create new opportunities and things to face competitors. Updates to creative and innovative business ideas continue to emerge, creating new opportunities and a fairly broad market. Therefore,...
Proceedings Article
Prototype of Indoor Air Purification Device Based on IoT
Azwardi Azwardi, Ariansyah Saputra, Fithri Selva Jumeilah, Kurniawan Adi Saputra
Further details regarding the Internet of Things (IoT)-based indoor cigarette smoke monitoring and disposal tool that has been developed by the author. The main component of this tool is the ATMega328 Microcontroller which acts as the main controller of the tool. The ESP32 microcontroller is used for...
Proceedings Article
Motion Graphic Production Design for Tourism Promotion Videos Shuji Lake Lembak
Isnaini Azro, Mustaziri Mustaziri, Ikhthison Mekongga, Shera Syaharani, Wilda Nabila Alifia, Irfansyah Irfansyah, Hidayati Ami, Aryanti Aryanti
Shuji Lake Lembak is one of the natural attractions with a lot of historical and cultural value, which is in Lembak Village, Kec. Lembak, Muara Enim Regency, South Sumatra Province, Indonesia. However, it is miserable that the current promotion of Shuji Lake Lembak tourism is carried out only by the...
Proceedings Article
IOT based Automatic Street Light Control
R. S. Carlos, Rumiasih Rumiasih
In this research, we designed an automated street light control system using IoT technology based on LDR sensors. The LDR sensor turns the lights on/off based on sunlight. The relay converts the system power before sending it to the street lights, then the system checks street light errors and sends...
Proceedings Article
Implementation of Lead Acid Usage with Resistive and Inductive Testing Using Fuzzy Logic Method IoT Monitoring System
Selamat Muslimin, Yudi Wijanarko, Ekawati Prihatini, Nyayu Latifah
The lead-acid battery is one type of rechargeable battery that is widely used by the public. Lead-acid batteries have many advantages, including lead-acid batteries that are easy to find and relatively inexpensive. However, the problem that is often faced by lead-acid battery users is that the user does...
Proceedings Article
Exploring Mechanical Behaviour of Different Fiber Types in Concrete Pavement
Ibrahim Ibrahim, Didi Yuda Wiranata, Tri Kurnia Rahayu J, Dimas Efendi Tambunan, Muhammad Rafif Ramadhan, Jingsong Shan, Yuying Jiao
The strength of the concrete greatly determines the quality of the rigid pavement construction itself. Concrete’s flexural strength is considered much smaller than the compressive strength value. This is because concrete has a brittle nature, so an elastic material is needed to be able to withstand loads...
Proceedings Article
Efficient Comparison of Series and Parallel Pumps to Support Oil Palm Nursery Activities
Ahmad Junaidi, Baiti Hidayati, Hendradinata Hendradinata, Amelia Maretha, Ramah Risdiansyah, Firza Faizah
This research was conducted to obtain a comparison of the efficiency of using a pump concerning the final results, namely in the form of pressure and discharge, so that it can be used for watering oil palm seedlings that are far from water areas and difficult terrain. Based on the results of research...
Proceedings Article
Analysis Of Bearing Capacity Of Shallow Foundation On Soft Soil Using Depth Variation PVC Pipe 4x4 Grid Pattern
Dafrimon Dafrimon, Sukarman Sukarman, Soegeng Harijadi, Nadra Mutiara Sari, Adam Tubagus Aldio, Ahmad Fikri Abdullah, Mutiara Primadira Putri
Soft soil has low soil bearing capacity, large settlement and high water content. Therefore, reinforcement is needed so that the soil can withstand the load on it. In previous research, soil strengthening was carried out using PVC pipes with different variations. The results obtained concluded that the...
Proceedings Article
Evaluation of Implementation of Mining Safety Management System at Pt Putra Muba Coal Sungai Lilin District Musi Banyuasin Regency South Sumatera Province
Lina Rianti, Maria Puspa Sari, Wina Aulia Putri
Mining Safety Management System (SMKP in Indonesia) is a part of management system in mining safety risk control consisting of mining operation safety and mining worker healt and safety as well as a guidance for mining companies in Indonesia in implementing mining safety management system. The evaluation...
Proceedings Article
Bridge Condition Assessment System Using The Bridge Management System (Bms) Method
(Case Study of 5 Bridges in Pali District, South Sumatra Province)
Revias Revias, Efrilia Rahmadona, Rio Marpen
Bridge Management System or BMS is the evaluation system of bridge condition to get accuracy in management maintenance that is the purpose of maintaining the bridge age and preventing damage that could happen to the bridge structure. This research was implemented in 5 bridges in PALI district, South...
Proceedings Article
Thermal Performance Analysis of a Shell and Tube Condenser in Steam Power Plant
Herlin Sumarna, Septiani Wulandari, Tri Lestari
Steam power plant is one of plant of electricity needs that has great potential in energy supply and is an alternative to electricity needs in Indonesia. This study reviews the thermal performance of a steam power plant’s condenser, focusing on its exergy efficiency and heat transfer rate over five different...
Proceedings Article
The Effect of Ca(OH)2 Addition and Cooking Process to Chemical Characteristic of Palm Sap Sugar (Arenga pinnata) Produced by Crytallisator
Erwana Dewi, Aldilla Sari Utami, Robert Junaidi
Palm sap is the liquid extracted from the sap-producing tree which is obtained by tapping. Palm sap is processed into palm sap sugar to increase its selling value and quality. The process of making palm sap sugar is time consuming, therefore the innovation of palm sap sugar, which is processed into powder...
Proceedings Article
Evaluating Marshall Characterization of rubber-modified asphalt used for asphalt concrete - wearing course (AC-WC)
Mahmuda Mahmuda, Didi Yuda Wiranata, Sumiati Sumiati, Dwie Antini Agustina, Athala Rania Insyra
The increasing number of vehicles in an area is the cause of road damage. The load from these vehicles can cause deformation in the road layer, especially in the asphalt concrete-wearing course (AC-WC) layer. Improving the quality of road layers requires materials that meet specifications and additives...
Proceedings Article
Confusion Matrix Using Yolo V3-Tiny on Quadruped Robot Based Raspberry PI 3B +
Amperawan Amperawan, Destra Andika, Masayu Anisah, Sabilal Rasyad, Parni Handayani
The implementation of Confusion Matrix uses Yolo V3-Tiny to detect objects in the form of person cameras and robots for navigation. It is hoped that the quadrupped robot in this research can be used during natural disasters so that it can recognize people who are still or have died so that they can be...
Proceedings Article
Application of Data Mining for Classification of Customer Eligibility at XYZ Bank in Credit Agreements Using Naives Bayes and Random Forest Methods
Arief Rahman, Ade Sukma Wati, Aurantia Marina, Nurul Ilma Hasana Kunio, Nur Jumrituniisah
This research addresses the challenges faced by Bank XYZ in assessing loan eligibility through manual analysis of customer data. Utilizing Data Mining techniques, specifically Naive Bayes and Random Forest algorithms, the study aims to enhance the accuracy of classifying customer patterns. The implemented...
Proceedings Article
Reducing the Littering Activity using Artificial Intelligence Technology
Nyayu Latifah Husni, Dewi Permata Sari, Yeni Irdayanti, Ade Silvia Handayani, Rein Aisyah, Charina Mutiara Chairunnisa
Littering has become a major concern for the preservation of the public health and aesthetics of cities. The aim of this research is to show that an AI-based device can be one of the alternatives in reducing the littering in the public environment. This research proposes an AI-based platform that allows...