Proceedings of the 7th FIRST 2023 International Conference on Global Innovations (FIRST-ESCSI 2023)

<Previous Article In Volume
Next Article In Volume>

The Study of Compressive Strength of Wall Panels with a Mixture of Used Tire Rubber Waste and GRC

Authors
Ahmad Syapawi1, Multilawati Nasution1, *, Sheragizca Yolanda Situmeang1
1Civil Engineering, Sriwijaya State Polytechnic, Palembang, Indonesia
*Corresponding author. Email: multilawati.nasution@polsri.ac.id
Corresponding Author
Multilawati Nasution
Available Online 27 February 2024.
DOI
10.2991/978-94-6463-386-3_21How to use a DOI?
Keywords
Used Tire Rubber Waste; Wall Panels; GRC
Abstract

The utilization of used tire rubber waste, particularly in the construction industry, becomes a critical issue in Indonesia due to its abundant presence and the challenges related to waste disposal. One solution to repurpose used tire rubber waste into a valuable resource, especially in the construction sector, is the substitution of one of the composition elements in wall panels. The panel composition which is researched consists of water, cement, fine aggregates, with the used tire rubber waste constituting 40% of the fine aggregates.

The purpose of this research is to assess the vertical compressive strength with the addition of GRC (Glass Reinforced Concrete) layer to wall panels. Test specimens are 150 mm x 150 mm cubes and wall panels with dimensions of 50 mm in thickness, 400 mm in width, and 800 mm in length for vertical compressive strength testing. The result of this study is a compressive strength of 82.18 Kg/cm2 for the cube specimens, while the vertical compressive strength of wall panels with a mixture of used tire rubber fiber mortar is 5.02 MPa. Furthermore, the addition of GRC significantly increases the vertical compressive strength of wall panels to 6.46 MPa.

Copyright
© 2024 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the 7th FIRST 2023 International Conference on Global Innovations (FIRST-ESCSI 2023)
Series
Advances in Engineering Research
Publication Date
27 February 2024
ISBN
978-94-6463-386-3
ISSN
2352-5401
DOI
10.2991/978-94-6463-386-3_21How to use a DOI?
Copyright
© 2024 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

risenwbib
TY  - CONF
AU  - Ahmad Syapawi
AU  - Multilawati Nasution
AU  - Sheragizca Yolanda Situmeang
PY  - 2024
DA  - 2024/02/27
TI  - The Study of Compressive Strength of Wall Panels with a Mixture of Used Tire Rubber Waste and GRC
BT  - Proceedings of the 7th FIRST 2023 International Conference on Global Innovations (FIRST-ESCSI 2023)
PB  - Atlantis Press
SP  - 186
EP  - 195
SN  - 2352-5401
UR  - https://doi.org/10.2991/978-94-6463-386-3_21
DO  - 10.2991/978-94-6463-386-3_21
ID  - Syapawi2024
ER  -