Advances in Engineering Research

+ Advanced search
26813 articles
Proceedings Article

Hardware-configuration based on FPGA for open CNC system

Shuanqiang Yang, Xinlong Huang
In this paper, according to analyzing the domestic and foreign recent research status and future developments of open architecture CNC system, an open soft system with configurable architecture based on PC + programmable I/O interface card has been studied. The research is studied for the drawbacks of...
Proceedings Article

Effects of Planting Cyphomandra betacea Seedlings after Mulching with Accumulator Straw on Soil Nutrient Content under Cadmium Stress

Kewen Huang, Lijin Lin, Ming’an Liao
A pot experiment was carried out to study effects of planting Cyphomandra betacea seedlings after mulching with four accumulators (Trifolium repens, Eclipta prostrata, Conyza canadensis and Stellaria media) straws on the content of soil nutrients under cadmium stress. The results showed that all accumulator...
Proceedings Article

Numerical simulation of an inner engaging gerotor based on the optimization of inlet and outlet cavities

Xiaohu Sang, Xiaojun Zhou, Xiaoguang Liu
Based on the available theoretical and half empirical methods of gerotor pump design, the optimization of inlet and outlet cavities for an inner engaging ellipse gerotor has been presented. The interior flow inside of the optimized cavities and pump has been observed by using software Pumplinx, and the...
Proceedings Article

“One Belt One Road”- “Going out” Route Choice of Chinese Enterprises

Yudong Hou
As the development and enhancement of economy and national power, our country has become an important engine of the world economy. “One Belt One Road” is conducive to the sustainable development of China's economy, and also the common needs of the countries along the way. “One Belt One Road” provides...
Proceedings Article

Optimization Of Hot Strip Finish Rolling Mill Schedule

Yu Zhu, Xianmin Cheng, Tao Wang
Rolling schedule plays a decisive role in rolling of strip steel, and has an important effect on capability of rolling mill. The optimize method of hot strip rolling mill is researched, and the capability of rolling mill is improved effectively, so the quality of the product is also improved.
Proceedings Article

Economic Data Mining Research based on Complex Networks and factor analysis

Yajie Li, Tao Huang, Liwen Ma
Economical data mining is practical and meaningful. Economic development levels of different regions in China are varied. We use complex network analyzing method to make network graphs and did nodal analysis and community structure detection of these regions to indicate the difference of the economic...
Proceedings Article

Optimization of Hydraulic Retarder Based on CFD Technology

Hao Li, Xiaohui Ren
The three-dimensional geometric model of hydraulic retarder is built based on an enterprise production as reference prototype, On CFD platform, based on the three-dimensional entity model of the hydraulic retarder, the internal flow field at full-filling condition is simulated and the braking performance...
Proceedings Article

A Study on Chemical Accident Emergency Plan Generating Techniques

Feng Liu, Qiang Hu, Xiaojia Jiang, Yuping Sun, Junhui Pan, Weiyin Zhang, Lei Yang
In this paper, techniques for chemical accident emergency generating were studied, and the basic framework of plan generating system was established through analysis of the contents of a typical emergency plan. Under this framework, the approaches of generating different parts of a plan were discussed...
Proceedings Article

Emergency Materials Distribution Risk Control

Qingjun Wang, Chang Liu
In recent years, all kinds of frequent occurrence of unexpected events, damage is very serious, affect the range is very wide. These sudden public events not only cause great loss of life and property, but also affects the social stability, and even endanger the national security, the economic society...
Proceedings Article

Research on Multi-level Domain Name Comprehensive Information Management

Chunqiang Li
Domain name system are both the underlying business, but also an important part of the Internet infrastructure. Research for this article expand BIND domain name system management problems. First, four domain names, for example, study the structure of multi-level domain name system; Then, based on the...
Proceedings Article

A locating method based on the Anselin elocal spatial autocorrelation model which researches in the heavy metal pollution source

Jinming Fu, Yuanfan Li
Based on the given data of As content in the soil ,using Log transformation, the Box-Cox transformation to exclude outlier for preprocessing data to meet the normal distribution.Using Anselin elocal spatial autocorrelation model to carry on local spatial clustering in order to cluster the similar attribute...
Proceedings Article

Research on impact of BaZr0.1Ce0.7Y0.2O3- electrolyte doped with a small amount of Al2O3 on the proton conducting solid oxide fuel cell

Hongyuan Zhao
Make the composite electrolyte by doping Al2O3 powders ,in the ratios of 1:0.02 and 1:0.04 respectively to the electrolyte masses, into initial powders of the electrolyte-BaZrCeYO made in the method of Pechini. After 10 hours sintered at 1400 , the composite electrolyte was completed , XRD test carried...
Proceedings Article

Effects of Mulching Tolerance Plant Straw on Phosphorus and Potassium Uptakes of Cyphomandra betacea Seedlings under Cadmium

Piao Liu, Huashan Lian, Hongyan Li, Lijin Lin
A pot experiments were conducted to study the effect of mulching tolerance plant straw on phosphorus and potassium uptakes of Cyphomandra betacea seedlings under cadmium (Cd) stress, four tolerance plants (Digitaria sanguinalis, Clinopodium confine, Plantago asiatica, Ranunculus sieboldii) straw were...
Proceedings Article

Sic MOSFET Modeling and Simulation for Pspice

Xiafei Zhu, Guolin Xu, Shaokang Jiao, Zhibin Zhao
Sic (silicon carbide, Sic), represented by the third generation of semiconductor devices with its superior performance, has obvious advantages on the voltage level, working temperature, switching losses. Then the size, weight, cost of the power electronic conversion may be significantly decreased and...
Proceedings Article

Short-term Load Forecasting Based on VPSO-Elman Neural Network

Bo Chen, Xiaozi Cui, Lili Yuan, Xian Chen
Because of the shortcomings which Elman neural network in the short-term load forecasting of power system is easy to fall into local minimum, slow convergence, Use VPSO (Variance Particle Swarm Optimization) to train Elman neural network in order to get optimal weights and thresholds. The optimized Elman...
Proceedings Article

Periodic Points Under Iteration of Sum of Squares or Cubes of Digits in Some Positional Systems

Wenliang Wu, Xingju Dang, Yao Zhang
There are different periodic and fixed points under iteration of sum of squares or cubes of digits of positive integer in different positional systems. On the iteration of sum of squares of digits, in binary and quaternary these points all converge to fixed point 1. There are three fixed points and one...
Proceedings Article

Influence of the Strength of the Filling Body on the Surface Subsidence and Deformation

Pengfei Yang, Yukai Wang, Xiangxiang Yang
In order to research the Influence of the strength of the filling body on the surface subsidence and deformation, with the 10203 working face of Xinyang Mine as the background, based on the numerical simulation software of FLAC3D, when the filling rate was 90%, the Influence of the strength of the filling...
Proceedings Article

Application of Chinese ancient architecture elements in product design

Mei Yang, Huan Yin
Research the method of blending Chinese ancient architecture into product design. From two sides of the overall features and characteristics of each part,summarized the artistic characteristics of Chinese ancient architecture. Enumerated examples of the comparison of morphology, structure and hue between...
Proceedings Article

Effect of reducing agent species on reduction and slag-metal separation from carbon composite pellets

Shihan Zhang, Guang Wang, Jingsong Wang, Buxin Su
The rotary hearth furnace iron nugget process has advantages of short reaction time and high quality product. Using semi-coke, bituminous coal, anthracite, charcoal and coke as raw material, effects of reducing agent species on reduction and melting separation of carbon composite pellets were studied....
Proceedings Article

Effect Of Source Tea On The Normal Mice's Gastrointestinal Function

Ting Wang, Yan Li, Tan Wang, Zuhong Wang, Ming Bai, Mingsan Miao
Effect of observation Fusen herbal tea in normal mice methods.: given to mice for 17 days, daily 2 times respectively in drinking high dose Fusen herbal tea, small dose Fusen herbal tea, Wanglaoji large dose of herbal tea, small dose of Wanglaoji herbal tea, herbal tea replace normal mice drinking water;...
Proceedings Article

Discussion of the Effect of Positional Tolerance on other Tolerances

Shu-ping Lv
For geometrical tolerance projects, some tolerance projects relate to other geometrical tolerances, namely a individual geometrical tolerance can control several other geometrical tolerances. If we can not accurately judge the related geometrical tolerance which can be natural controlled by a certain...
Proceedings Article

Aviation Logistics Development Research

Xiaobin Wang, Chang Liu
China's trade policy and China logistics policy changes, the rapid development of aviation logistics in china. Aviation logistics developing in a high speed, China's domestic aviation logistics enterprise has brought new market development opportunity while, also brought from the market environment changing,...
Proceedings Article

Analysis of Heavy Metal Pollution of Superficial Soil in Urban Area

Chen Li, Yuxiang Xie, Kaichao Zhang, Xidao Luan
According to the monitoring data of content of 8 main heavy metal elements in a certain urban area, this paper conducts a modeling study on heavy mental pollution of superficial soil in cities. According to single-factor concentration evaluation standard and comprehensive evaluation standard (Nemerow...
Proceedings Article

Controlled-Release oxygen Using polymers

Hongpo Wang, Hong Zhou, Hao Liu, Tong Yuan, Xuejiang Li
In tissue regenerative cell therapy is an important limitation is the initial hypoxia. In order to increase growth and cell survival after implantation of our oxygen release material were tested. Calcium peroxide polymer matrix used as the oxygen source. Two polymers to slow and prolonged release oxygen,...
Proceedings Article

Effects of Different Concentrations of Selenium on Photosynthetic Pigment Content of Perilla frutescens

Renyan Liao
A pot experiment was conducted to study the effects of different concentrations of selenium (Se) on photosynthetic pigment content of Perilla frutescens. The results showed that Se treatment had significant effect on contents of chlorophyll a, chlorophyll b, carotenoid and total chlorophyll. With Se...
Proceedings Article

Design of energy saving film used in residential buildings

Xiao-Hong Rong, Wen-Liang Wang
Glass materials are widely used in building, which can improve the lighting condition of the building, but often have some problems in actual use. To solve the problem of increasing heat and energy consumption, an energy saving film is gained in this paper based on optical thin film theory and optimization...
Proceedings Article

Security Analysis of Cloud Computing in the Mobile Internet Environment

Mingwan Luo
In order to improve the benefits of the mobile cloud computing network and the quality of the security service of the mobile cloud computing, this paper aims to make a design of the control framework of the cloud computing resources of the cloud computing security service among its service domains, and...
Proceedings Article

The Application Research of FCM Clustering Based on Genetic Algorithm in the Telephone User’s Behavior

Hailiang Tang, Lei Shi, Bin Liu
Telecom user behavior analysis, is that in the case of gaining the basic consumption data of the users to disposal, count, and analyze the relevant data, and discover the law of the users consumption from it, and combine these laws with the telecom marketing strategies to find the problems in the current...
Proceedings Article

Risks Management for Warning of Power Grid

Yanping Chen, Liruo Lu, Mengqing Jia, Yanli Chang
Brought about rapid development of the power grid technical innovation, infrastructure and new equipment put into operation significantly increase the workload, frequent changes in network operation mode, non-normal operation mode, special operation mode is difficult to avoid, to the security and stability...
Proceedings Article

A new synthesis algorithm based on least squares for InSAR phase unwrapping

Liubing Jiang, Yongji Liu, Li Che, Cong Li
Phase unwrapping is a key step of interference synthetic aperture radar (InSAR) signal processing, while the existence of some factors such as the noises and the lack of data sampling makes this process extremely difficult. The least square method is the fastest way to unwrap, and there is no region...
Proceedings Article

3D Meso-Mechanical Analysis Of Elastic Properties Of Concrete Materials

Zhi Zhang, Peibao Xu
A 3D meso-mechanical model is introduced herein to estimate the elastic properties of concrete materials on the basis of the assumption that concrete can be considered as a three-phase material which contains cement mortar, aggregates and interfacial transition zone (ITZ). The influences of aggregate...
Proceedings Article

Research on Module Function for Key Management System

Chunqiang Li
Abstract. The password technology is one of the core technology of information security problem. The purpose of the key management is the key of the production, storage, distribution, update, control and destroyed in the process of the whole life cycle to ensure the safety of the key. Key management...
Proceedings Article

The Express Corporate Timeliness Control and Optimization Strategy

Jianmei Bao, Chang Liu
In the 1980s, the speed to run industry to enter China, China Express enterprises increased rapidly expanding business scope. But in the course of the rapid development of a number of courier companies, small scale of operation of enterprises Express business qualification, the poor level of service...
Proceedings Article

On a patent analysis method for identifying the core technologies of metro in china

Mei Long, Tieju Ma
The purpose of this paper is to identify the core technologies in metro field by analyzing the overall structure of technologies and interactions among of them, which is beneficial to grasp technological trend and advance of metro field in China. For this study, the metro patent data were collected (1986-2015)...
Proceedings Article

Configuration Discussions of the Chemically Recuperated Gas Turbine Powering a Ship

Fumin Pan, Hongtao Zheng, Pingping Luo, Ren Yang
The chemically recuperated gas turbine (CRGT) is a promising engine on ship because of its high thermal efficiency and low pollutant emission. This paper is aimed at determining an applicable configuration of the CRGT for marine applications. Diesel is the selected fuel, and the minimization of Gibbs...
Proceedings Article

The multiple degrees of freedom magnet-track relationship in Maglev train

Jiaolong Wen, Yaozong Liu, Dingxiao Zhu
The research of magnet-track relationship is the foundation and key point in maglev system dynamics. Due to the ups and downs, traverse, yaw, pitch and roll of the suspension electromagnet will certainly happen when maglev train moves, so establish three-dimensional numerical model and calculate the...
Proceedings Article

Research on Key Energy-saving Techniques for A Novel Full Air Cooling UV-curing Oven via CFD Approach

Shangsheng Wu, Zhongming Yu, Jianyou Chen
The optimum design of a novel full air cooling UV-curing oven is proposed, to overcome the disadvantage of traditional drying ovens on the high energy consumption and inefficiency, at al. The optimum curing oven is simulated and analyzed by Fluent applied to the CFD technology. Comparison between the...
Proceedings Article

A Study of Phyllostachys bambusoides forma shouzhu Yi Forest Soil N indicators and Enzyme Activity in Spring and Summer

Qianxin Wang, Zhanbiao Yang, Yuanxiang Yang, Bowen Sun, Zhang Cheng, Xuemei Zhu
A study was about the surface soil enzyme activity and N indicators Variation characteristics of Phyllostachys bambusoides forma shouzhu Yi forest in Liangping, Chongqing Municipality in spring and summer. The results showed that, the forest soil content of organic matter(OM), total nitrogen(TN), available...
Proceedings Article

Evaluation on Intensive Use of Rural Residential land: A Case Study of Suining County in Jiangsu Province

Xiao-Hong Rong, Wen-Liang Wang
In this paper, an evaluation index system is developed for the intensive use of rural residential land from the aspects of land use intensity, input-intensity, arrangement, as well as usage efficiency. Using the entropy method, on which the intensive use level of rural residential land in Suining County...
Proceedings Article

Hybrid Flow-Shop Scheduling Problem Based on Genetic Algorithm

Rong Zhang
In order to solve the job shop scheduling problem which includes disordered material flow and lopsided load of equipment, the thesis has done some research on how to apply in genetic algorithm on hybrid flow-shop scheduling problem. And the thesis also has illustrated the method of realization from a...
Proceedings Article

Simulation Study for Energy Harvesting Using Polyvinylidene Fluoride flag in the Flow

Fengchi Lv, Rujun Song, Xingxu Zhang, Xiaobiao Shan, Tao Xie
In this paper, Dynamic response and energy harvesting potential of single piezoelectric flag in the uniform flow is analyzed through 2D simulation method. A piezoelectric material named Polyvinylidene Fluoride (PVDF) is used to manufacture the piezoelectric flag. Special example is introduced to analyze...
Proceedings Article

Long Strength of Layered Composite under Normal Fracture

Vladimir I. Andreev, Robert A. Turusov, Nikita Yu. Tsybin
The article deals with the stress-strain state of layered composite of rectangular section under tension by distributed uniform normal load q. Interaction between layers is accomplished by the contact layer in which is mixed the substances of adhesive and the substrate.
Proceedings Article

Calculation and Analysis of Regional Land Use Carbon Emissions

Dan Song, Qi-gang Jiang, Shu-jie Li
Land as the carrying capacity of human activities, the influence of carbon emissions different way of land use contributed to is different. Thus, the paper taking Changchun City in China as an example, estimates the net land use carbon emissions from 2001 to 2013 and explores the measuring method.
Proceedings Article

Design of UPS Inverter Control System Based on DSP

Qian Yang, Mingming Guo, Jianhua Dou
To obtain high-quality output voltage, a multi-loop control for UPS inverter is proposed. On the basis of double closed-loop control, repetitive control is introduced to improve total harmonic distortion (THD) of the output voltage. Also, RMS control is introduced to increase steady-state accuracy of...
Proceedings Article

The Use of Persona in Recommendation System and Privacy Protection

Suduo Li, Kaiying Deng, Jingwei Deng, Yingxing Li
Aimed at the contradiction between personalized recommendation and privacy protection, this paper puts forward the basic idea of persona, a digitalized user model. The method uses browser to analyze user's access behavior, gets a comprehensive and accurate user model, so as to help realize the personalized...
Proceedings Article

Design and Implementation of GeoScience Case Database on JSF Frame for Teaching

Zhenhe Zhao, Shilai Wang, Ping Zhang
Case base construction is of great significance for the promotion of case teaching. But at present there is no successful geosciences case library can be used as reference. So the construction and development of geosciences case library has significance to fill the gap. This article is about design and...
Proceedings Article

Studies About How E-Commerce Logistics Can Reduce Operational Costs

Jianmei Bao, Chang Liu
This paper is the analysis of electronic commerce development process, the logistics cost composition and characteristics, and the content of our country sheds cost and how characteristic. To our country electronic commerce development environment, the factors which influence the logistics cost. Through...
Proceedings Article

Synthesis of a Polyhedral Oligomeric Silsesquioxane (POSS) containing Phenyl and DOPO (7Ph-T7-DOPO) and its thermal stability

Feng Zheng, Sheng Han, Jin Han
A new type of polyhedral oligomeric silsesquioxane (POSS) (7Ph-T7-Vinyl) containing phenyl and 9, 10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) was synthesized from phenyltrimethoxysilane, trichlorovinylsilane, and DOPO in high yield. This product was subjected to addition reaction using an...
Proceedings Article

Influence Of Frequency Offset On Sampling Value Differential Protection

Jiahui Fan, Duanzhong Wang, Hongji Du
The current sampling value differential protection gradually reflects its unique superiority among various differential protection. With the application of sampling value differential protection, the influence of frequency offset on it should be considered. In this paper, based on the analysis of the...
Proceedings Article

Design of a Rotary Sprout Vertical Cultivation Device

Yi Guo, Jiwu Ma
Sprouts need substantive water in the growth process, which will cause a high manual irrigation cost. Besides, manual irrigation is usually uneven. To solve this problem, a rotary sprout vertical cultivation device is designed to realize automatic irrigation and guarantee evenness of irrigation during...
Proceedings Article

Design on Micro Blog Distribution System Based on Struts2 Framework

Zhe Li, Yuqiang Yang, Houhua Shen
Micro blog content distribution becomes a bottleneck restricting the development of micro blog. In this paper, a study based on Struts2 framework provides technical support for the system development. Firstly, learning Struts2 framework, core controller, business controller and business logic components;...
Proceedings Article

The ecological significance and construction form of forest school

Jing Yan, Man Yin
In order to protect the increasingly gradually scarce forest resources and ecological resources in the urbanization, the forest construction has become an important measure to promote the greening and beautifying of the urban and rural areas at the present stage of our country. Forest construction involves...
Proceedings Article

Discussing on how to improve the subway rail flaw detection quality

Haiwei Xu, Jiangping Cao, Gang Li, Wei Wang
As the subway as public transportation in major cities in China play an increasingly important role, the subway operation safety more and more get people's attention.Due to the particularity of subway operation environment and status, makes the subway foundation, especially the quality of the steel rail.The...
Proceedings Article

A Predictive Model for Antioxidative Regulation of Wheat under Cadmium Stress

Siquan Hu, Sisi Zhao, Haiou Wang
Cd-induced signal transduction triggers ROS production, which promotes oxidative stress indirectly. In the present work, we aggregated and interpreted the abundant biological evidence that has been accumulated to date into a network, and then constructed a multi-level dynamic model of signal transduction...
Proceedings Article

Feasibility study on high-speed rail and air cooperation

Jianghao Luo
The development of air transport and high-speed rail (HSR) is facing two problems. One is competition, having been stated in many literatures focusing on the economic distances; and another is stresses from large investments, energy consumption and environmental degradation. In this paper, the feasibility...
Proceedings Article

Research on Hydraulic Manifold Block Hole Routing Optimization Based on Improved Ant Colony Algorithm

Lile He, Ze Li, Zhijie Guo
A collaborative evolutionary optimization method for the layout of hydraulic manifold blocks was presented according to its structure feature, an optimization design mathematic model of manifold blocks in the spatial layout was established, and it was solved based on the ant colony algorithm. Special...
Proceedings Article

Structure design of a new-style moving blade adjusted axial fan

Zebin Yu, Zhengcong Liu, Xinyu Gao, Shaoxiong You
The moving blade adjusted axial fan is used in the icing wind tunnel, controlling of rotation rate and adjustment of angle of blades in the static state to achieve the test Mach (Ma) number in the kinds of condition. The axial fan should have the following advantages: wide range of speed regulation,...
Proceedings Article

Communication of double TMS320F28335 DSP Based on McBSP

Qian Yang, Jianhua Dou
A bidirectional real-time data communication without distinction between master and slave is achieved with double TMS320F28335 DSP using its multichannel buffered serial port (McBSP). The shortcoming of the communication on SPI mode that the slave cannot initiate communication is overcame. The hardware...
Proceedings Article

Effect of Ti on microstructure and properties of Ti-Nb microalloyed high strength steels

Qing Yuan, Guang Xu, Bei He, Yulong Zhang
Three Ti-Nb microalloyed high strength steels with varying Ti contents were refined in laboratory 50 kg vacuum induction furnace. Microstructure observation and TEM analysis were conducted. Tensile tests were performed. The results show that both yield strength and ultimate tensile strength increase...
Proceedings Article

The Research on Customer Satisfaction of Express Service

Xiaobin Wang, Chang Liu
With the continuous development of China's market economy, courier services, the rapid rise of one of the services has become indispensable in our lives. Courier service for its speed, time-consuming short, convenient features popular with users. Courier service companies on China's market is mainly...
Proceedings Article

Analysis of system transient response and its effect on sound speed measurement based on TFCW

Chao Zhou, Chunjie Qiao, Zhigang Huang, Weihua Dai
This paper carries out a research to analyze system transient response and its effect on sound speed measurement based on two frequency continuous wave (TFCW). Because the bandwidth of an actual measurement system is limited, the received signal is generally polluted by a system transient response, and...
Proceedings Article

The Research of Water Immersion Test of loess under overburden pressure

Yu Zhang, Hui Li, Guibo Bao, Ningshan Jiang, Wuyu Zhang, Xiaoyun Yang
The collapsibility test in field can have several times to tens of times of error with computed results. The writer's purpose is to find the regulation of the develop of loess' collapsibility, a field test was completed, the writer also gave a formula to forecast the relationship between immersion time...
Proceedings Article

Design of a Sprout Ultrasonic Aeroponic Cultivation Device

Yi Guo, Jiwu Ma
In factory production of sprouts, the layer-rack vertical cultivation devices are usually used and the sprinkling irrigation adopted, which is a severe waste of water resources. Besides, for lack of sunshine, growth of sprouts is hampered. To solve this problem, a sprout ultrasonic aeroponic cultivation...
Proceedings Article

Functional Requirements Analysis on Construction Project Cost System

Nannan Zhang, Jingzhao Luan
Construction project cost is the key problem in the control and management of construction project. For the existing cost system can not adapt to the development of the construction industry information needs of the status, this paper based on the use case model technology to the construction cost system...
Proceedings Article

Design and Implementation of the Evaluation System of the Theatre

Wei Jiang, Xiru Guan, Yujian Jiang, Shaobo Wang
The evaluation system of the theater is based on user data, professional evaluation and audience comments, and we use web technology to build the system. In this paper, the framework, function and technical design of the evaluation system of the theatre are presented. Thebootstrap is used to buildthe...
Proceedings Article

Research on the Design of Combination Furniture Based on Toy Brick Style Concept

Zongming Liu, Wenjin Liu
In order to better assist the innovative furniture design, toy brick style combination concept is applied to furniture design. This paper analyzes the history and conception of combination furniture based on this concept, and analyzes this concept from game, DIY, green design, function design, and culture,...
Proceedings Article

Seepage stability study on gravel soil slope in Jin’an bridge station reservoir

W.C. Xu, L.H. Zhang, J.H. Chen, Xueyu Dai
Jin’an bridge station is located at the middle reaches of Jinsha river which is a new super large hydro-power station, since impounded in 2012, different levels of landslide happened to the reservoir slope, and the change of seepage field is one of the main reason causing geo-hazards. In this paper,...
Proceedings Article

The Structure of Cyclic Codes

Xuedong Dong
A code is a cyclic code if and only if is a -submodule of the ring . Perfect additive codes have been utilized in the subject of steganography. The algebraic structure of cyclic codes was determined in 2014. In this paper we determine the algebraic structure of cyclic codes ,where is an odd prime. Any...
Proceedings Article

A Case Study of Enterprise Cleaner Production Audit of Urban Garbage Disposal

Wei Li, Tingting Pan, Zihao Zhou, Yaochun Yu, Haiyan Duan
With the sustainable development of society and economy, people’s living standard is experiencing a steady improvement, a lot of urban domestic garbage has become a social problem which contaminates the environment and influences our life. Reasonable and effective solutions are both actively looked for...
Proceedings Article

Quantitative inversion of sparse vegetation coverage in desertification area

Xuedong Li, Xuya Zhang, HongYan Zhang, Guang bin Yang
Based on unmixing model and using the Thematic Mapper (TM) image as well as obtaining end-members by ground spectral measurements, quantitative retrieval of information on sparse vegetation coverage in oasis-desert transitional area in Minqin, Gansu was done. The results showed that a wide band of TM...
Proceedings Article

Screening citrus SSR molecular marker primers

Xiaojia Wang, Zhihui Wang, Siyu Zhang, Jundou Liu, Xun Wang
Within 38 primer pairs tested, 26 pairs were successfully amplified, and 81 PCR bands were amplified, with an average value of 3.12 bands per primer, 18 pairs showed 100% polymorphic ratio, 2 pairs showed 66.67% polymorphic ratio. In total, 72 PCR polymorphic bands were determined, and in average, 2.77...
Proceedings Article

Analysis and Design of Charge Pump Configurations Based on Voltage Doubler for RFID

Mengxin Zhang, Jiancheng Li, Hongyi Wang, Cong Li, Li Yang
Charge pump is the configuration which can provide a voltage gain to program nonvolatile memory in radio frequency identification (RFID). In this paper, A complete theory of charge pump is presented, which shows that the influence of body effect on power dissipation and power efficiency is more and more...
Proceedings Article

Research on weighted naive Bayesian classifier in discriminative tracking

Yan Wang, Dawei Yang, Guangsan Li
Aiming at the question that each positive sample in trained sample set has the same weight when training the naive Bayesian classifier in discriminative tracking algorithm, an algorithm is proposed to put different weight on different positive sample according to the distances between the positive samples...
Proceedings Article

Study on the Parameters of Cole-Cole Model

Xiaojian Wang, Fujiang Mo, Jian Zhang, Ganggang Zhao
The paper presents ways for determining parameters of the characteristic impedance , the value of time constant , and , through formula transformation and frequency spectroscopy method (FDS).Finding out the values of coefficient with Cole-Cole model. Building double-relaxation model to fit complex dielectric...
Proceedings Article

Study and Simulation of Electromagnetic Energy Recovery for Semi - active Suspension

Zhijun Guo, Yichao Chen
Aiming at the problem that the existing semi-active suspension system needs external power supply, the electromagnetic energy recovery device for semi-active suspension is proposed. Based on the analysis of the structure and working principle of the energy recovery device, the energy recovery model and...
Proceedings Article

Experimental study on mechanical properties of FRP components and comparison of steel properties

Liang Yu, Yan Li, Lu Chen, Chaoyi Kang, Tianyi Zhang
In order to study the applicability of the Fiber Reinforced Plastic (FRP) composite materials for light structure, a tensile compression test of a large number of FRP samples was carried out. Through statistically analysis of test data, we get the FRP’s basic mechanical parameters like tensile strength,...
Proceedings Article

Study on growth and accumulation characteristics of Sorghum bicolor?S.Sudanense. on uranium

Shiqi Zhang, Lixing Wang, Qing Hu, Peng Zhang, Lishan Rong
It is utilized the pot experiments to investigate physiological and biochemical indexes as well as the characteristics of the accumulation of uranium of Sorghum bicolor´S.Sudanense. under the different uranium concentrations (0,1, 5, 20mg/kg) stress. It shows that photosynthetic pigment and soluble protein...
Proceedings Article

Research of Ball Screw Pair of Noise Prediction Based on the Virtual Lab and Experimental Verification

Xianghong Xu, Tao Yu
This paper aims to analysis the ball screw pair in transient dynamics model based on the virtual acoustic prediction software. Its acoustic finite element model is established in the Lab to extract the transient dynamics analysis, which is concluded that the vibration response of the ball nut pair of...
Proceedings Article

Wiener State Estimator for Non-regular Descriptor System

Yan Xu, Guosheng Zhang
Using the modern time-series analysis method in the time domain, based on the autoregressive moving average (ARMA) innovation model and white noise estimator, non-regular descriptor discrete-time stochastic linear systems are researched. Under assumption 1~3, an asymptotically stable reduced-order Wiener...
Proceedings Article

A Case of VBA Application in Transaction Processing

Guoliang Dong, Guofang Wu, Chaozhou Chen
Plenty of transactional work is continual, odd and time-consuming. Using the VBA technique can simplify the work procedure and liberate the workforce. A case of fetching required information from Word files and filling into the sheet of an Excel file is discussed. A general method of using embedded VBA...
Proceedings Article

Research on Breaker Intelligent Exhaust Device Design

Yi Li, Hao Jiang, Fugao Gong, Hengyi Xia
Aimed at frequent bulge fault of breaker hydraulic operating mechanism, oil pump failure is analyzed, and liquid level sensor and gas sensor are used to design intelligent exhaust device. This device, with neural network self-learning height measurement algorithm as core, processes the data obtained...
Proceedings Article

Research on Polyphosphoric Acid Modified Asphalt Aging Test

Lijia Zhang, Rongxin Guo, Feng Yan, Yanbin Wei, Yanlin Sun
With the development of China's science and technology and large-scale construction of infrastructure, put forward higher requirements to the highway pavement performance, modified asphalt is necessary. Aging is a problem of modified asphalt in use process cannot be ignored, which directly affects the...
Proceedings Article

Numerical simulation research on permeability coefficient inversion based on the data of mine water inrush

Baofeng Zhao, Lianjing Ma
In order to find out the hydrogeological condition of aquifer and gain the permeability coefficient, the permeability coefficient was inverted based on the data of mine water inrush. The observation data of water flow and long-time observation hole’s water level was be used during the process of water...
Proceedings Article

The Application of Finite-difference Extended Kalman Filter in GPS Speed Measurement

Yanjie Cao
GPS Speed Measurement, just like position measurement, is a very widely-applied field. GPS can not only determine the real-time location of carriers in motion, but also determine the instantaneous speed of carriers . Therefore, at present, GPS speed measurement is also very widely applied. In view of...
Proceedings Article

Failure Analysis of Welding Insulation Cyliender

Hua Li, Lian Wang, Zhongming Lu, Kexiu Liu, Weijian Qu, Jinmei Lin
In order to analyze the failure cause of welding insulation cylinder, to which explosion had happened, in a filling station, a series of experiments and analysis were taken, including macroscopic analysis, chemical composition analysis, fracture Analysis, metallographic examination and so on. The results...
Proceedings Article

Environmental Risk Assessment of Enterprises from Key Industries in Tianjin Binhai New District

Long Zhou, Hao Zhou, Liyong Fan
This paper aims to comprehensive research methods both in China and abroad and develop a practical method of environmental risk assessment about enterprises from key industries based on the data of Tianjin Binhai New District. This method consider the following factors: types of industries, the enterprise...
Proceedings Article

Active Contour Model Based on Nonlocal Means Method For Color Texture Segmentation

Jingge Lu, Guodong Wang, Zhenkuan Pan
Color texture segmentation is a very important subject in the fields of computer vision. In order to segment the color textures, a new method based on active contour model with nonlocal Tikhonov regularization is proposed. In detail, another smoothness item which is the Tikhonov regularization is added...
Proceedings Article

The construction of knowledge innovation platform and the analysis of data flow

Jinwen Li, Dingguo Sheng, Yanli Ma
The existing knowledge management platform cannot well support the design and development of the large power diesel engine, based on the function and requirement ‘s analyses of the knowledge management on the innovation platform, through the introduction of the integrated delivery, forming an innovation...
Proceedings Article

Design of Ground-detect Equipment for Aircraft Electrical Anti-skid Braking System

Zheng Wang, Ding-jian Xie, Jia-li Fan
According to the principal of aircraft electrical anti-skid braking system a detection equipment was designed by integrity using PLC technology, LCD graphical displaying, measurement and control data processing, information storage and communication technology. The design schemes of hardware and software...
Proceedings Article

Determination of Network Topology by Matrix Partial Multiplication

Yubin Yao, Dan Wang, Zhiliang Wu
Slowness is a crucial factor to prevent matrix method from its practical use in network topology. The matrix method which gets full connectivity matrix by multiplying the adjacency matrix repeatedly and determines connective sets by comparing or scanning rows of the full connectivity matrix is very time-consuming....
Proceedings Article

Key Technologies and Applications of 10GW-Level Wind and Solar Power Plant Cluster Controlling

Qiang Zhou, Ningbo Wang, Shien He, Yanhong Ma, Zhao Chen, Mingsong Wang
According to China's new energy large-scale centralized development which brings some problems, such as: resource monitoring, electric power forecast, cluster modeling, active / reactive power / security and stability of the coordinated control and demonstration project construction, design and development...
Proceedings Article

Vertical Sunshine Temperature Gradient Loads Comparative Study

Guang-xing ZHu
Under sunshine action the concrete box girder will generate temperature gradient load which will lead the temperature stress in the structure. But the sunshine temperature gradient load type and value for concrete structure are slightly different in specifications worldwide. Long-term Observe the sunshine...
Proceedings Article

Effect of Particle Size on the Microstructure of Cu60Cr40 Alloy by Microwave Sintering

Dongdong Liu, Bo Wang, Zhongqi Dong, Suhua Yin, Huilan Sun
Effect of the particle size of Cu, Cr on the microstructure of Cu60Cr40 alloys was investigated using the method of mechanical alloying and microwave sintering. The particle size of Cu, Cr was analysised by the BT-9300S type laser particle size distribution analyzer, and Cu60Cr40 alloys has been investigated...
Proceedings Article

The Research and Application Suggestions of Degradable Macromolecule Materials

Xiaotian Wang, Jinyu Wei
In this paper, reviewed some biodegradable polymer materials such as photodegradable polymeric materials, chemical synthesis polymer materials, microbial synthesis polymer materials, photo biodegradable polymeric materials and mixed type polymer materials. Points out the existing problems and the development...
Proceedings Article

Viscoelastic Parameter Identification of Asphalt Mixture Based on 1stOpt Method

Fuyu Wang, Haibin Wei, Ziqi Li
At present, commonly used methods to identify Burgers model parameters have subjectivity shortcomings. This paper adopts 1stOpt software with unique nonlinear fitting function. The stress-strain-time equation can be obtained according to constitutive equation of Burgers model. Then four parameters of...
Proceedings Article

Driver’s stress physiological characteristics when front vehicle cut in

Yuping Lu, Yu Cui
Aiming at the influence of front vehicle cut in suddenly on driver’s physiological load, 22 drivers were convened to carry out virtual driving test with equipment of MP150 physiology monitoring system, and driver’s physiology data was recorded when the front vehicle cut in suddenly. Heart growth rate...
Proceedings Article

An optimized dynamic frame slotted ALOHA anti-collision algorithm

Hui Bao, Jing Wang
The dynamic frame slot ALOHA (DFSA) algorithm is a typical anti-collision. For the shortcomings of DFSA algorithm, this paper presents an improved algorithm – IDFSA. On the one hand, IDFSA algorithm to improve the label estimation algorithm, so as to achieve dynamic adjustment. On the other hand, through...
Proceedings Article

Spatial position and posture of component detection system based on binocular stereo vision

Yuan Liu, Yunfeng Fei, Wei Wang, Yinhao Song
With the continuous improvement of the manufacturing level in the aerospace, automobile, shipbuilding and other fields, higher requirements for the assembly precision and speed of the components in the manufacturing process are raised. However, the manual operation method is generally adopted in the...
Proceedings Article

Research on the Procurement Model of Multiple-Supplier based on Genetic Algorithm

Heng Zhang, Qiang Lin, Weijun Zhai, Kun Zhang
According to the procurement under multiple-supplier, this paper evaluates the supplier quantitatively. Considering the factors of procurement cost and price discount, this paper establishes a procurement model based on the theories of relationship management. This model can give the optimal scheme and...
Proceedings Article

Experimental Study on Friction Coefficient and Stress Loss of Retard-bonded PC Steel Strand

Yue Ma, Zhan-Fei Wang, Shao-Peng Cao
In order to verify the influence of curing degree of retarded binder on the friction coefficient of retarded-bonded PC steel strand, 3 PC beams with 3300mm in length and 300×400 cross-section is manufactured and 3 retard-bonded PC steel strands in straight-through arrangement at each PC beam is set....