Proceedings of the 2nd Annual International Conference on Advanced Material Engineering (AME 2016)
900 authors
- Huang, Li
- Structure and Antibacterial Activity of Bi-cyclohexanone Pentaerythritol Ketal
- Huang, Li-Wu
- A Solid-State Metal Hydride/Oxygen Cell using La0.78Ce0.22Ni3.73Mn0.30Al0.17Fe0.50Co0.30 in the Anodeand Nafion as Electrolyte
- Huang, Lu
- Study on Growth Conditions for High Quality Hydrogenated Amorphous Silicon Oxide Films
- Huang, Min-Xia
- Orthogonal Design Hydrogen Peroxide Degradation of Aniline Process
- Huang, Qing
- Effects of Powder Characteristics on Rheological Properties of Alumina Slurries
- Huang, Shu-Hui
- Effect of Cu Additions on the Microstructure and Mechanical Properties of Spray Deposited Zn-30Al Alloy
- Huang, Ting-Ting
- The Preparation and Processing Technology of PLA Superfine Fiber Non-woven Materials
- Huang, Wei-Dong
- Effect of Ambient Temperature on Solid Motor Grain in Shipboard Multi-launch Container
- Huang, X.D.
- Application of Recycle Composites on Cold-rolled Ribbed Roller
- Huang, Zhang-Bin
- Electrochemical Polymerization and Characterization of Polyaniline/Carbon Nanotube Composite Films
- Ino, Akihiro
- Nodal Gap Energy in High-Tc Cuprate Superconductors: A new Paradigm
- Ino, Akihiro
- Doping- and Momentum-Dependent Superconducting Gap of Bilayer Cuprate Bi2Sr2CaCu2O8+ Revealed Using Low-energy ARPES
- Ishida, Shigeyuki
- Nodal Gap Energy in High-Tc Cuprate Superconductors: A new Paradigm
- Ishida, Shigeyuki
- Doping- and Momentum-Dependent Superconducting Gap of Bilayer Cuprate Bi2Sr2CaCu2O8+ Revealed Using Low-energy ARPES
- Ishikado, Motoyuki
- Nodal Gap Energy in High-Tc Cuprate Superconductors: A new Paradigm
- Ishikado, Motoyuki
- Doping- and Momentum-Dependent Superconducting Gap of Bilayer Cuprate Bi2Sr2CaCu2O8+ Revealed Using Low-energy ARPES
- Ji, Lei
- Development of a Heater Structure Based on ITO Films Deposited by RF Magnetron Sputtering for Chip-scale Atomic Clock
- Ji, Xiao-Lei
- Theoretical Study on Influence Factors of the Angle of Inner Hole Generatrix through Cone Hole Open-die Cold Extrusion
- Jia, J.B.
- Effects of Probiotics Diet Fed Myxcobacteria (JCH-04) on Survival, Growth, Digestive Enzymes Activities and Aquatic Environment in Grass Carp (Ctenopharyngodon idellus)
- Jia, L.X.
- Study on Impact Wear Properties of the Surface Composites Reinforced by Particles
- Jia, Qiang
- Synthesis and Characterization of Photoresponsive Biopolymers Having Spiropyran and Chitosan Groups
- Jia, Shou-Yu
- Preparation and Characterization of Keratin–cellulose Composite Films
- Jiang, Bo
- Study on Decolorization of Methylene Blue by H2O2 Catalyzed with Iron-loaded Hydrated Cement Particles
- Jiang, C. C.
- Synthesis of Ce/N Co-doped TiO2 Using CTAB Template with Improved Visible-light-driven Photocatalysis
- Jiang, Chao-Chao
- Study on Growth Conditions for High Quality Hydrogenated Amorphous Silicon Oxide Films
- Jiang, Fu-Ping
- Effect of Different Nanoparticles on Seed Germination and Seedling Growth in Rice
- Jiang, Jin-He
- Synthesis of Spinal Mg1.5Mn0.25Ti0.5O3 by a Solid State Reaction Method and Study of Its Exchange for Li+
- Jiang, Jin-He
- Inorganic Ion Exchanger Mg1.5Ti1.25O4 and Its Ion-exchange Ability
- Jiang, Jin-He
- Study of Li+ Ion-exchanger Mg2TiO4
- Jiang, Lu-Zhen
- Analysis of Two Kinds of Chemical Reagents on Improvement of Local Soil Corrosion Environment
- Jiang, Quan-Ying
- Structure and Mechanical Properties of (CrAl)N and (CrAlSiY)N Coatings Prepared by Asymmetrical Bipolar DC Magnetron Sputtering
- Jiang, Shan-Quan
- Comparative Trial on Biological Contact Oxidation and Bio-filter Process for Wastewater Treatment
- Jiang, Sheng-Lin
- Effect of 0.5PbO-0.5B2O3 Glass Addition on the Microstructure and Electrical Properties of Pb0.87Ba0.1La0.02(Zr0.68Sn0.26Ti0.06)O3 Anti-ferroelectric Ceramics Fabricated by Hot-press Sintering Method
- Jiang, Wen-Xia
- Research and Preparation of Mycelium-Soybean Straw Composite Materials
- Jiang, Xiong-Li-Ren
- Experimental and Modeling Studies of Engine Rubber Bushing Subjected to Impact Loading
- Jiao, Yu-Min
- Effects of Eletro Deposition Process Parameters on the Tribological Properties of Ti (CN) Particles Reinforced Ni-base Alloy Composite Coatings
- Jin, En-Ze
- Effects of Laser Cladding on Thermal Tensile Property and Fracture of Gas Turbine Engine Blade Material GH864
- Jin, G.X.
- Determining the Influence of Pore Shape on Filtering Quality of Spunbonded Nonwovens
- Jin, Jing
- Study on Growth Conditions for High Quality Hydrogenated Amorphous Silicon Oxide Films
- Jin, Xie-Fei
- Finite Element Analysis of Structural Dynamic Testing of Composite Quick-Install Scaffold
- Jin, Y.H.
- Oxidation Behavior of TP304H in Water Vapor at 590 °C
- Ju, Qing-Yun
- Development of a Heater Structure Based on ITO Films Deposited by RF Magnetron Sputtering for Chip-scale Atomic Clock
- Kan, Hong-Min
- The Preparation Method of Aluminum-magnesium Alloys
- Kang, Shi-Zhao
- Controllable Preparation and Electrochemical Behavior of Nanostructured Zn2GeO4
- Kang, Yong-Qiang
- Omnidirectional Reflection Band in Thue-morse Quasicrystal Containing Indefinite Metamaterials
- Kou, Hong-Chao
- Crystal Plasticity Finite-Element Simulation of Ti-6Al-4V Alloy with 3D Polycrystalline Models
- Kou, Hong-Chao
- The Influence of Surface Roughness on Diffusion Bonding of High Nb Containing TiAl Alloy
- Kou, Hong-Chao
- Finite Element Modeling of Power Spinning of Thin-walled Ti2AlNb Alloy Shell
- Kuang, H.Y.
- Transparent Conductive Thin Films of Aluminum-doped Zinc Oxide Prepared by Magnetron Sputtering
- Lai, Yong
- The Influence of Carbon Fiber Heating Wire Spacing on Concrete Pavement Temperature
- Lan, Shan-Shan
- Effects of the Amount and Introducing time of Emulsifier on the Preparation of Carboxylated Polystyrene Particles
- Lee, Jyh-Fu
- GaN Films under Different Growth Mechanisms Studied by Synchrotron X-ray Absorption Spectroscopy
- Li, Bing
- Stress Relieve in High Rigidity Metal Component Added Mass by Vibration
- Li, Bo
- Effect of 0.5PbO-0.5B2O3 Glass Addition on the Microstructure and Electrical Properties of Pb0.87Ba0.1La0.02(Zr0.68Sn0.26Ti0.06)O3 Anti-ferroelectric Ceramics Fabricated by Hot-press Sintering Method
- Li, C.Q.
- The Effects of oil-gas Lubrication Air Pressure on the Bearing Temperature of Motorized Spindle
- Li, Cai-Lin
- The Research on RTM Molding Process of Thin-wall Rib Structure of Composite Materials
- Li, Chun-Mei
- Effect of Electric Field on Aging Phase Transformation in Al-Zn-Mg-Cu Alloys
- Li, Chun-Mei
- Insulation Breakdown Influence Factors and Development of Cross-linked Polyethylene Cable
- Li, Chun-Mei
- The Electrical Tree of Polyethylene Insulation Study Progress
- Li, Chun-Sheng
- A Simple Route to Asymmetric Composite Particles via Co-assembly of Block Copolymer and Inorganic Nanoparticles in Solution
- Li, Cong-Cong
- Preparation of Thermosetting Polystyrene Insulation Board
- Li, Dan
- The Influence of ABS with Different Contents of Butadiene on the Crystallization Behavior of MCPA6/ABS Copolymer Alloys
- Li, Dong-Dong
- Analysis of Two Kinds of Chemical Reagents on Improvement of Local Soil Corrosion Environment
- Li, G.P.
- Effect of Mo Content on the Microstructure and Mechanical Properties of TiC Steel Bonded Carbide
- Li, H.H.
- The Research Progress on Method of Preparation of Biomass Charcoal and Modification
- Li, Hai-Cheng
- Finite Element Analysis of Casing Holes Model
- Li, Hong-Tao
- Fatigue Crack Propagation Rate of High Strength Steel's Welded Joints
- Li, Hua-Bing
- Effects of Eletro Deposition Process Parameters on the Tribological Properties of Ti (CN) Particles Reinforced Ni-base Alloy Composite Coatings
- Li, J.P.
- The Magnetic Control Tunable Characteristics of Localized Modes of One-dimensional Cantor Quasicrystal Structure Containing Nanoparticle Magnetic Fluid
- Li, Ji-Hua
- Preparation and Characterization of Pineapple Leaf Nanocellulose by High Pressure Homogenization
- Li, Ji-Shun
- Effect of Geometric Error of Bearing Parts on the Radial Runout of Rolling Bearing
- Li, Ji-Shun
- A Control Method of the Force Loading Electro-hydraulic Servo System Based on BRF
- Li, Ji-Zhen LI
- Finite Element Modeling of Power Spinning of Thin-walled Ti2AlNb Alloy Shell
- Li, Jian
- Elastic properties and Debye Temperature of Tetragonal and Cubic Ga3Zr under High Pressure: A First-Principles Investigation
- Li, Jiang-Jiang
- The Same Formation Mechanism of Surface Pits for both a- and c-plane GaN
- Li, Jiang-Wen
- The Effect of Air Knife Wiping Speed on Galvanized Coating Weight and Thickness
- Li, Jie
- Warning Index System of Multi-emergency Coupling on Cluster Analysis
- Li, Jin-Fei
- Effect of Ambient Temperature on Solid Motor Grain in Shipboard Multi-launch Container
- Li, Jin-Jin
- Preparation of Superhydrophobic ZnO Surface Derived from Wood Template
- Li, Jin-Jin
- Synthesis of Biomorphic Fe2O3 Fibers Derived from Silk Template
- Li, Jin-Shan
- Crystal Plasticity Finite-Element Simulation of Ti-6Al-4V Alloy with 3D Polycrystalline Models
- Li, Jin-Shan
- The Influence of Surface Roughness on Diffusion Bonding of High Nb Containing TiAl Alloy
- Li, Jing
- Effects of Eletro Deposition Process Parameters on the Tribological Properties of Ti (CN) Particles Reinforced Ni-base Alloy Composite Coatings
- Li, Jun
- Theoretical Study on Influence Factors of the Angle of Inner Hole Generatrix through Cone Hole Open-die Cold Extrusion
- Li, K.
- The Effects of Dislocations on the Crystal Growth Rate of Silicon --A Molecular Dynamics Study
- Li, Ling
- High Efficient Co3S4 Supported by Carbon Nanofibers Composite Counter Electrode Catalyst for Dye-sensitized Solar Cells
- Li, Ling
- Highly Efficient Dye-Sensitized Solar Cells based on Carbon Nanofibers Counter Electrodes
- Li, Liu-Jun
- Analysis of Two Kinds of Chemical Reagents on Improvement of Local Soil Corrosion Environment
- Li, Ming-Sheng
- Structure and Mechanical Properties of (CrAl)N and (CrAlSiY)N Coatings Prepared by Asymmetrical Bipolar DC Magnetron Sputtering
- Li, Pei-Sheng
- Reactivity and Kinetic Analysis of Coal Chars Combustion under Oxy-fuel Conditions
- Li, Pei-Yi
- Microwave-Assisted Synthesis of Ag/Cu Bimetallic Nanoparticles and Their Antibacterial Properties
- Li, Po
- Synthesis and Adsorption Properties of Ti2O(PO4)2·2H2ONanobelts
- Li, Q.Z.
- Determining the Influence of Pore Shape on Filtering Quality of Spunbonded Nonwovens
- Li, Qing-Xuan
- GaN Films under Different Growth Mechanisms Studied by Synchrotron X-ray Absorption Spectroscopy
- Li, Qun-Yan
- The Preparation and Papain Immobilization of Novel Mesoporous SiO2/Fe3O4 Microspheres with Size-tunable Hollow Cavity
- Li, Ru-Song
- Effect of Annealed Temperature on Microstructure and Magnetic Properties of Ag/Fe/Ag Nanogranular Films
- Li, Shan-Shan
- Fatigue Behavior of 2198-T8 Aluminum-lithium Alloy with Riveted Lap Joints
- Li, Shu-Xin
- Cure-Dependent Viscoelastic Analysis on the Residual Stresses and Distortion Created in Composite Corner during Curing
- Li, Shuai
- Structures and Photoelectric Properties of Ce and Co Doped CuInTe2 Semiconductor
- Li, W.Q.
- Application of Recycle Composites on Cold-rolled Ribbed Roller