Proceedings of the 3rd Annual International Conference on Mechanics and Mechanical Engineering (MME 2016)
561 authors
- Ai, Cheng-Han
- Optimization Design of Oil Film Thickness of Hydrostatic Pressure Table
- An, Bo
- Numerical Study of the 2D Lid-driven Triangular Cavities Based on the Lattice Boltzmann Method
- An, Hu-Ping
- Testing Research on the Deformation Mechanism of High Manganese Steel and the Model of Surface Roughness Machined at High-Speed Cutting
- An, Jun
- Construction of industrial Robot Virtual Assemble Training System with Unity3D
- Bao, Xiao-Yan
- Large Crankshaft Connecting Rod Journal Fillet Multi-axis Linkage Machining Method Research and Finite Element Analysis
- Bergad..., J.M.
- Numerical Study of the 2D Lid-driven Triangular Cavities Based on the Lattice Boltzmann Method
- Cai, Chang-Qing
- Research on the Influence of Air Pressure to High Accuracy Mass Measurement
- Cai, Chang-Qing
- Numerical Study of Sound Pressure Distribution in Volume Determination with Acoustic Method
- Cao, Da-Min
- Numerical Study of Low Reynolds Number Flapping Wing
- Cao, Dan
- Effect of Glucose on the Crystallization and Thermal Properties of Poly(L-Lactic Acid) Prepared Through Mixed Solution Method
- Cao, Deng-Qing
- Torsional Vibration Suppression of A Gear System Installed with A Damping Ring
- Cao, Fang
- Numerical Calculation for Effect of Fluid-structure Interaction on Flow Field Pressure in High-Flow Control Valve
- Cao, Jing
- The Structure Design and Motion Analysis for a Heavy-Load Palletizing Robotic
- Cao, Jun
- Experiment Study on Friction Behaviour of Ti-6Al-4V Alloy for Hot-working
- Cao, Mao-Sen
- Wavelet 2D Modal Curvature for Identifying Non-Uniform Cracks in Plates under Noisy Conditions
- Cao, Yu-Ming
- The Effect Analysis of Geometry and Load Parameters on Contact Stiffness of Sprag One-way Clutch
- Chang, Jia-Dong
- The Fault Diagnosis of Shield Disc Cutter Based on Neural Network
- Chen, Bo-Hang
- The Structure Design and Motion Analysis for a Heavy-Load Palletizing Robotic
- Chen, Dong-Li
- A Model of Strain Localization and Its Application in Prediction of Shear Bands in Sand
- Chen, Feng
- The Simulation of Fluid Dynamics inside the Continuous Wave Mud Pulser Generator with Four-hole Rotary Valve
- Chen, Hong
- Modelling and Experimental Study of Shape Memory Alloys Coil Spring Actuator
- Chen, Hong-Jie
- Optimization Design of Printing Nozzle for a Delta 3d Printer
- Chen, Hui-Juan
- Experimental Study on Fluid Flow in Porous Media by MRI Technique
- Chen, Hui-Juan
- An Artificial Intelligence Prediction Method of Bottomhole Flowing Pressure for Gas Wells Based on Support Vector Machine
- Chen, Jian-Wen
- Characteristics Analysis of the Flow Field of Self Balanced Multi-stage Centrifugal Pump
- Chen, Jian-Wen
- Finite Element Analysis on Heat Generation of Multiplate Wet Clutch
- Chen, Jie
- The Reciprocating Rectilinear Moving Mechanism at High Frequency with Low Load Driven by Two Symmetrical Gears
- Chen, Jin-Xin
- 4-DOF Mechanism Design for Reflectors in Vacuum
- Chen, Kai-Wen
- Force Feedback Control of Tele-Operation Based on Electro-Hydraulic Multi-Freedom Manipulator
- Chen, Kang
- Design of Fatigue Life Testing Machine for Slewing Bearing Based on LabVIEW
- Chen, Kiu
- Finite Element Analysis of a New Welding Structure of Cutter Mount in TBM
- Chen, Kui
- The Fault Diagnosis of Shield Disc Cutter Based on Neural Network
- Chen, Qi
- Modelling and Experimental Study of Shape Memory Alloys Coil Spring Actuator
- Chen, Shi-Bin
- The Optimized Design of the Key Components of Mechanical Rotary Stereo Garage Based on ANSYS
- Chen, Wei
- An Artificial Intelligence Prediction Method of Bottomhole Flowing Pressure for Gas Wells Based on Support Vector Machine
- Chen, Yan-Hui
- Research on the Application of BOM in Modular Partition
- Chen, Yong-Gang
- Design and Realization of Simulation System Combined With Virtual Reality of Tool Controller Mechanism for Machining Center Based on Irai Software
- Cheng, Wen-Ping
- The Application of COMSOL Secondary Development Technology in the Fluid-solid Coupling Study of Prionace Glauca Pectoral Fins
- Cheng, Zhong-Wei
- Express Automatic Sorting Machine
- Dan, Hong
- Thermogravimetric Assessment of Combustion Characteristics of Blends of Lignite Coals with Coal Gangue
- Dang, Xiao-Yan
- The Analysis of Impact Damage under Emergency Landing Due to Airworthiness Requirements for Airplane Seat/Restraint System and Occupant
- Deng, Jing-Quan
- Nonlinear Dynamics Analysis Based on Node Model of Contact urface
- Deng, San-Peng
- Development of CAD System for Gauge based on UG
- Deng, Shao-Quan
- A Numerical Study on the Resistance Prediction of a Medium Speed Craft
- Deng, Zu-Qiang
- Simulation, Measurement, Communication & Evaluation of Measurement and Simulation Dual-mode Terminal
- Di, Chun-Yan
- Structure Design and Calculation Analysis on Lateral Current Collector of Hanging Air Train
- Di, Qin-Feng
- Experimental Study on Fluid Flow in Porous Media by MRI Technique
- Di, Qin-Feng
- The Simulation of Fluid Dynamics inside the Continuous Wave Mud Pulser Generator with Four-hole Rotary Valve
- Di, Qin-Feng
- An Artificial Intelligence Prediction Method of Bottomhole Flowing Pressure for Gas Wells Based on Support Vector Machine
- Diao, Xiao-Ou
- Finite Element Analysis of the Dynamic Response of the Maxillary Molar under Impact Loading
- Dias, Chamika
- Study on the Adaptive Generalized Synchronization of Hetero Structure Chaotic Systems
- Ding, Guo-Long
- Research on the Three Dimensional Modeling Method of Automobile Steering Rocker Shaft Non-Circular Sector Gear
- Ding, Jin-Bin
- Numerical Analysis and Optimization of Internal Flow Field in Optical Module of DUV Laser
- Ding, Yun-Hong
- The Mechanical Behaviour during Multiple Injections and its Influence on Fracture Network
- Dong, Tian-Wen
- Gas Pressure Control System for Air-assisted Extrusion Based on PLC
- Dou, Chang-Yong
- Research on Fibiril-Reinforced Poroelastic Mechanical Behaviour of Articular Cartilage
- Dou, Chen-Yun
- Finite Element Analysis of the Dynamic Response of the Maxillary Molar under Impact Loading
- Dou, Qing-Bo
- Design and Study on Mechanical Properties of Aircraft Wing Lift Simulation Device
- Du, Cheng-Lin
- Finite Element Analysis of the Effect of Cracks in Tire Shoulder
- Du, Cheng-Lin
- Finite Element Analysis of the Impact of Scratches on the Tire
- Du, Ming-Gang
- Research on Composite Braking Technology for Electric Drive High Speed Tracked Vehicle
- Du, Wen-Liao
- Design of the Single Leg of the Quadruped Bionic Robot with Jumping
- Du, Xuan
- Autonomous Identification and Planning System for Quadrotor UAV Based on Vision
- Du, Zhao-Peng
- Finite Element Analysis of the Effect of Cracks in Tire Shoulder
- Du, Zhao-Peng
- Finite Element Analysis of the Impact of Scratches on the Tire
- Duan, Yue-Chen
- Impact Dynamics of a Flexible Beam with Rotation
- Fan, Jin-Song
- Construction of industrial Robot Virtual Assemble Training System with Unity3D
- Fan, Peng-Fei
- Analysis of Invalidation Mechanism of Shell-Cup in Rotary Feed Mechanism
- Fan, Qin
- Data Generation of Layer Slice in FDM Manufacturing
- Fan, Wen-Bo
- Research on Maintenance Training System of Semi Physical Equipment Fire System
- Fang, Xiao-Geng
- Research on the Application of BOM in Modular Partition
- Fang, Yuan
- Study on the Adaptive Generalized Synchronization of Hetero Structure Chaotic Systems
- Fang, Zhen-Qun
- Relationship between Injury Risk of Student Occupant and Different Driving Speed of School Bus
- Feng, Fan
- Finite Element Analysis of the Dynamic Response of the Maxillary Molar under Impact Loading
- Fu, Fei
- Large Crankshaft Connecting Rod Journal Fillet Multi-axis Linkage Machining Method Research and Finite Element Analysis
- Gai, Jing-Bo
- Research on Reliability Assessment Based on the Multi-Source Information Fusion Technology with Improved Inheritance Factor
- Gao, Jie
- Lightweight Design of Door Based On Multi-Objective and Robustness
- Gao, Jin-Ling
- Elastic-plastic Analysis and Experimental Study on the Simply Supported Bi-modulus Graphite Beam
- Gao, Qin-Wei
- Effect of Glucose on the Crystallization and Thermal Properties of Poly(L-Lactic Acid) Prepared Through Mixed Solution Method
- Gao, Zhi-Yong
- Relational Database Ontology Discovery Method Based on Formal Concept Analysis
- Ge, Le-Yi
- Simulation, Measurement, Communication & Evaluation of Measurement and Simulation Dual-mode Terminal
- Gong, Ming-De
- Design and Research of the Wire - Driven Lumbar Parallel Rehabilitation Device
- Gong, Ming-De
- Force Feedback Control of Tele-Operation Based on Electro-Hydraulic Multi-Freedom Manipulator
- Gong, Ya-Jing
- Optimization Design of Printing Nozzle for a Delta 3d Printer
- Gu, Chun-Yuan
- Experimental Study on Fluid Flow in Porous Media by MRI Technique
- Guo, Jia
- Experiment Study on Friction Behaviour of Ti-6Al-4V Alloy for Hot-working
- Guo, Jun-Feng
- Testing Research on the Deformation Mechanism of High Manganese Steel and the Model of Surface Roughness Machined at High-Speed Cutting
- Guo, Qin-Yang
- Biomechanical Analysis of Achilles Tendon Stretch And Plantar Fascia Stretch In Plantar Fasciitis Treatment
- Guo, Tong-Tong
- The Nonlinear Viscoelasticity of the Human Knee Articular Cartilage
- Guo, Tong-Tong
- Research on Fibiril-Reinforced Poroelastic Mechanical Behaviour of Articular Cartilage
- Guo, Tong-Tong
- A Three-Dimensional Finite Element Model Constructed Using Magnetic Resonance Images of a Knee
- Guo, Yu
- Investigation of PBGA solder joint failure in reflow process
- Guo, Yu-Bo
- A New Approach to Prediction of Fatigue Life For 2024-T42 Aluminum Under Variable Amplitude Loading
- Han, Fei
- The Simulation of One Metro Wheel Tread Temperature in Cycle Braking Condition
- Han, Yan-Lin
- Local Stability and Bifurcation Analysis of A Functionally Graded Material Plate
- He, Hong-Xiu
- Tooth Number Matching and Its Software Development for 2KH Planetary Gear Mechanism
- He, Lu-Wu
- Numerical Simulation of Sudden Contraction Flow for Viscoelastic Fluids with the Lattice Boltzmann Method
- He, Xiao-Fan
- Inference of User's Intention for Human - Robot Cooperation Based on Machine Vision
- He, Yang-Hua
- Data Generation of Layer Slice in FDM Manufacturing
- He, Zhi-Yong
- Growth Feature of Diamond-Like Carbon Films by Various Vacuum Plasma Methods