Proceedings of the 1st International Conference on Mechanical Engineering and Material Science (MEMS 2012)
626 authors
- Antar, M.M. Abdala
- Numerical Investigation of Heat Transfer Coefficient in Ribbed Rectangular Duct with Various Shaped Ribs and Different Coolants
- Antar, M.M. Abdala
- Theoretical Film Cooling Effectiveness Investigation on C3X Vane Suction Side with Multi Trench Configuration
- Bangjun, Lv
- Improving Dynamic Performance of Stewart Platforms through Optimal Design Based on Evolutionary Multi-objective Optimization Algorithms
- Bao-ping, Wang
- Study on Possibility of Processing TRIP Steel Sheet by Single Point Incremental Forming
- Baohua, Guo
- Rheology Properties of Poly(butylene succinate-cobutylene adipate)/Attapulgite Nanocomposites
- Baoya, Zhao
- Design of Automatic Testing System for Steel Tape Based on Image Processing
- Bei, Liu
- Study on Compound Biofilm Formation on the surface of Iron Oxide Coated Sands and Its Removal Efficiency to Ammonia-Nitrogen
- Bendong, Liu
- Study on the Inductance of Micro Planar Coil for Eddy Current Detection
- Biao, Ma
- Research of Torque Response Characteristics During the Engagement of Wet Clutches
- Bing, Lv
- The Research of Restraint Design Theory Based on the Evolution of Product Technology Systems
- Bo, Jiang
- Dynamic Analysis of Hydraulic System of a Mobile Garbage Compression Equipment Based on AMESim
- CHEN, JIA-HUI
- Preparation and Stress Fringe Map Change law of light Elastic-plastic Material in Deformation Object
- Caiqiao, Wei
- Design of Automatic Testing System for Steel Tape Based on Image Processing
- Chang, Wang
- Simulation of High-Sensitivity Hydrophone Based on ANSYS
- ChangQing, Gao
- The Research of Restraint Design Theory Based on the Evolution of Product Technology Systems
- Changbin, ZHANG
- Sound Quality Subjective Evaluation Analysis of Noise Inside High-speed Trains
- Changfeng, Tian
- Fatigue Reliability Analysis on the Concrete Beams
- Changlu, Zhao
- A Simulation Study of an Advanced Thermal Management System for Heavy Duty Diesel Engines
- Changyun, Miao
- Design and Application of Multi-axis Automatic Control System Based on LabVIEW
- Chen, Yang
- A New 3-D Assembly Approach For Nanoelectromechanical Switch Fabrication
- Cheng, WANG
- Structural Design and Motion Mechanism of the Rope-Drive Snake-Like Robot
- Cheng-bo, Yang
- The Feasibility Analysis of Decrease the Reverse Reaction Rate in the Carbothermic Reduction of Magnesia in a Vacuum
- Cheng-cheng, JI
- Numerical Simulation of Blank-making Roll Forging Process for Heavy Automotive Front Axle
- Cheng-jun, Zhou
- Pure Electric Bus Crashworthiness Analysis
- Chenguang, Liu
- Effect of Anions during a Solid-state Reaction Preparation of Ammonium Aluminum Carbonate Hydroxide
- Chenguang, Liu
- Ionic Liquid Assisted Fabrication of Mesostructured -Al2O3
- Chenguang, Liu
- Hydrothermal Synthesis of Ammonium Aluminum Carbonate Hydroxide (AACH) Nanoplatelets and Nanofibers pH-Controlled Morphologies
- Chengzu, HUANG
- Structural Design and Motion Mechanism of the Rope-Drive Snake-Like Robot
- Chenxiao, Ning
- Study on Vibration and Noise For the Hydraulic System of Hydraulic hoist
- Chongsheng, Li
- Condition Assessment of A 360MW Turbine
- Chuan-zhen, Qi
- The Study of Injection Compression Molding of Thin-wall Light-guide Plates with Hemispherical Micro structures
- Chuanlong, Liu
- Simulation of Recycling Cable in Underwater Towed System
- Chun-Peng, LI
- Research on the Design Method of Modular Structure for Satellites
- Chun-ling, Sun
- A design of Cooperative Vehicle Infrastructure System Based on Internet of Vehicle Technologies
- Chun-ling, Sun
- The Research of Tire Pressure Monitoring Method Based Model Between Force and Slip
- Chunsong, Li
- The Technology Improvement on Production of the Polycrystalline Silicon by Zinc Production
- Cong, Wang
- Research on the Hydraulic Test Platform of Large Components
- Dan, Wang
- Corrosion and Protection of High Strength Low Alloy Steel in Oilfield Water Injection System
- Dandan, Li
- CFD Investigation on the Performance of Aerostatic Thrust Bearing With Exhaust Slots Used in Low-vacuum Condition
- Danyong, Wang
- Three-Dimensional Progressive Damage Analysis of Composite Laminates Containing a Central hole Subjected to Compressive Loading
- Daotian, Hu
- Analysis of 3D Magnetic Field of Magnetic Suspension Spherical Reluctance Motor
- De-bin, Zhu
- Bolt Connection Establishing Model Method and Shock Response Comparison in Diesel Fixed Assembly
- Debin, Zhu
- Analysis on the Main Bearing’s Lubrication of Internal Combustion Engine Under the Impact
- Dejie, Huang
- Optimize Design and Analysis based on the Marginal Utility of the Cost of Supply Inventory
- Dequan, SHI
- Review on the Methods for Measuring the Moisture Content of Green Sand
- Dequan, SHI
- Study on Effect of Mixing Process on Green Sand Properties Based on Orthogonal Experimental Method
- Dequan, SHI
- Nonlinearity Analysis and Compensation of Measuring the Moisture Content of Green Sand Based on Capacitance Method
- Dequan, SHI
- Orthogonal Experiments for Effect of Components on Performance Parameters of Green Sand for High Density Moulding
- Desheng, Li
- Study on the Inductance of Micro Planar Coil for Eddy Current Detection
- Dewei, Guo
- Application of Rank-order Morphological Filtering and Sample Entropy in Feature Extraction of Rotor Fault
- Dezhang, Xu
- Modal Sensitivity Analysis and Structural Optimization of the Cab of Light Truck
- Di, Tang
- Observation of Crack Evolution in Nickel steel of different Thermal Treatment
- Dong, Zhang
- Simplification Method and Application of 3D Laser Scan Point Cloud Data
- Dong, Zhang
- MTRC correction algorithm for Bistatic ISAR in presence of constant Bistatic angle
- Dong-peng, Xian
- Analysis of Safety about the Jet Flow Field of Automatic Weapon
- Dong-qing, CHENG
- Flow Field Analysis in The Domain of Work of Turbine Applied to Submunition Fuze
- Dongdong, QI
- Flame Symptom Modelling Near Lean Blowout in a Swirl-Stabilized Gas Turbine Model Combustor
- Donggen, Huang
- The Preparation and Characterization of N-F-Sm-TiO2 Sol and Its Photocatalytic Degradation for 4-chlorophenol
- Dongmei, Li
- Study on Compound Biofilm Formation on the surface of Iron Oxide Coated Sands and Its Removal Efficiency to Ammonia-Nitrogen
- Dongming, Zhang
- Thermodynamic Calculation for Laser Synthesizing Hydroxyapatite Composite Coating
- Dongyun, Tang
- Finite Element Analysis and Optimal Design of Portable Optical Fiber SPR food Detector based on SolidWorks
- Eryong, Hou
- Finite Element Analysis on Magnetic and Mechanical Characteristics for Hybrid Magnetic Bearing
- F. Mokbel, Hany
- Stabilization of Real Inverted Pendulum Using Pole Separation Factor
- F. Mokbel, Hany
- Research on the Mechanical Design of Two-Axis Fast Steering Mirror for Optical Beam Guidance
- Fan, Yang
- A Path Planning Algorithm of Closed Surface for Fiber Placement
- Fang, Ding
- Modal Sensitivity Analysis and Structural Optimization of the Cab of Light Truck
- Fang, Guo
- Compound Gear Box Torque Analysis of Vertical Mixer
- Fang, Shao
- Simulation of Machining of Incoloy 907 based on Thermodynamics
- Fang, Song
- Reverse Engineering of Pilot Wheel Vane
- Fei, Lu
- A design of Cooperative Vehicle Infrastructure System Based on Internet of Vehicle Technologies
- Fei, Xie
- Corrosion and Protection of High Strength Low Alloy Steel in Oilfield Water Injection System
- Fei, Zhang
- Parameters Identification Applied to Large Space Robotic Manipulators
- Feiling, Shen
- Experimental study on LCZ Temperature field of Multi-layered Porous Media Salt Gradient solar Pond
- Feng, XU
- A Electric Vehicle Powertrain Simulation and Test of Driving Cycle Based on AC Electric Dynamometer Test Bench
- Feng, Yang
- Fuzzy-Logic-Based Direct Torque Control Research On Permanent Magnet Synchronous Motor
- Feng, Zhu
- Test and Optimization of ABC-System
- Feng-bao, He
- Performance Study about Electro-spark Depositing DK460UF Coating on Surface of Turning Tool
- Fengqi, Gao
- Microfluidic Chips Etching Process on Soda-lime Glass
- Fifi, N.M. Elwekeel
- Numerical Investigation of Heat Transfer Coefficient in Ribbed Rectangular Duct with Various Shaped Ribs and Different Coolants
- Fifi, N.M. Elwekeel
- Theoretical Film Cooling Effectiveness Investigation on C3X Vane Suction Side with Multi Trench Configuration
- Fu-hai, Liu
- The Research of Tire Pressure Monitoring Method Based Model Between Force and Slip
- Fuchuan, Huang
- The Development of the Environment Friendly Machining Center Lubricant
- Fujun, Zhang
- A Simulation Study of an Advanced Thermal Management System for Heavy Duty Diesel Engines
- Fuqiang, Ying
- Grinding Force and Feed in Grinding the Spring End
- Gan-Yun, Huang
- Mechanical modeling of Lateral Cracking in Brittle Materials under Indentation
- Gang, Liu
- An Exploratory Examination of Relationship Value in Inter-enterprise Cooperation
- Gang, Liu
- An Empirical Study of After-sales Service Relationship in China’s Auto Industry
- Gang, Yang
- Design of Automatic Testing System for Steel Tape Based on Image Processing
- Gang, ZHAO
- Challenges in Energy and Innovation Competence Construction Practices in China
- GeFang, Wang
- Simplification Method and Application of 3D Laser Scan Point Cloud Data
- GeFang, Wang
- MTRC correction algorithm for Bistatic ISAR in presence of constant Bistatic angle
- Guangchun, Fu
- The Fabrication of the Microfluidic Device with Micro- and Nano- Scale Channels
- Guanghong, Zhou
- Numerical Simulation of Thermal Stress in Sputtered TiB2 Films by Finite Element Method
- Guanglong, Wang
- Microfluidic Chips Etching Process on Soda-lime Glass
- Guangyu, Zhu
- Design and Application of Multi-axis Automatic Control System Based on LabVIEW
- Gui Wu, Wang
- Preparation of Ultrafine Magnesium Hydroxide with Two Kinds of Dispersing Agent
- Gui-feng, LIU
- Dynamic Absorber Characteristics of Decoupling Coating Covering Underwater Structure
- Gui-feng, LIU
- Selection of the Location of Point Excitation Force of Plate Measurement Model about Decoupling Coating
- Guijun, Chen
- Research of a Certain Aero Winch Test System
- Guili, GAO
- Review on the Methods for Measuring the Moisture Content of Green Sand