Proceedings of the Second International Conference on Mechanics, Materials and Structural Engineering (ICMMSE 2017)
249 authors
- Korzhyk, Volodymyr
- Analysis of the Current State of the Processes of Hybrid Laser-Plasma Welding
- Kwon, Oil
- Analysis of the characteristics in variation of groundwater level in consideration of geological property during excavation in urban area
- LI, Chuanyan
- Optimization of Porous Concrete containing Admixtures on Lighten Road
- LU, Chunhua
- Optimization of Porous Concrete containing Admixtures on Lighten Road
- Le, Guigao
- Research on the burning rate coefficient on the interior ballistics of gas ejection power system
- Lee, Dae-Young
- Evaluation of Cavity Exploration Technology to deal with Ground Subsidence in Urban Area
- Lee, Jeeyong
- Analysis of the characteristics in variation of groundwater level in consideration of geological property during excavation in urban area
- Lei, Liming
- Effects of Hot Isostatic Pressing on Microstructure and Mechanical Properties of Hastelloy X Samples Produced by Selective Laser Melting
- Lei, Zheng
- The Monitoring of Temperature Effect on the Supporting Structure of Main Active Reflector for FAST
- Li, ChangJun
- Realization of Maneuver trajectory in Computer wargaming system based on an Improved A* Algorithm
- Li, Dao-kuan
- Reliability evaluation of distribution network with distributed generation
- Li, Guo
- Galloping Control for Iced Conductors using Tuned Mass Dampers with time-delayed feedbacks
- Li, Ji-Hua
- Fatigue Crack Growth Life Prediction of Screw Blade in Screw Sand Washing Machine based on Austen Growth Law
- Li, Jinwei
- Formation Mechanisms of Electron Beam Processed Surface Textures on Titanium Alloys
- Li, Kai
- Formation Mechanisms of Electron Beam Processed Surface Textures on Titanium Alloys
- Li, Li
- Research On Windage Yaw Of V-Type Composite Insulators In Ultra-High Voltage
- Li, Li
- Research on Aeolian Vibration Fatigue Life of Conductors
- Li, Li
- Galloping Control for Iced Conductors using Tuned Mass Dampers with time-delayed feedbacks
- Li, Li
- Vision modeling optimization of freely placed and moving objects
- Li, Pu-Wang
- Fatigue Crack Growth Life Prediction of Screw Blade in Screw Sand Washing Machine based on Austen Growth Law
- Li, Renfeng
- Research on the burning rate coefficient on the interior ballistics of gas ejection power system
- Li, Shenglin
- Advances of Magnetic Memory Testing Technology
- Li, Shenglin
- Study on Magnetic Memory Testing Signal Characteristics of Pipeline Defects Based on Wavelet Packet Analysis
- Li, Shenglin
- The Study of the Magnetic Memory's Magneto-Mechanical Coupled Effect Based on ANSYS
- Li, Shengyong
- Study on Integrated Control of Active Anti-Roll Steel Bar and Electronic Stability Program Based on Particle Swarm Optimization
- Li, Shengyong
- Study on Vehicle Instability Control Based on Hydraulic coordinator of Electronic Stability Program and Anti-lock Brake System
- Li, Shuguang
- The Performance of 2.5D Woven Polymeric Matrix Composites under Ballistic Impact Loadings
- Li, Shuguang
- Experimental Investigation of Damage Process in Layer-to-layer Interlock 3D Woven Composites under Uniaxial Tension
- Li, Si-dong
- Fatigue Crack Growth Life Prediction of Screw Blade in Screw Sand Washing Machine based on Austen Growth Law
- Li, Xinrong
- Comparison on modifications of vanadium oxide thin films by single-walled and multi-walled carbon nanotubes
- Li, Yali
- Effects of Hot Isostatic Pressing on Microstructure and Mechanical Properties of Hastelloy X Samples Produced by Selective Laser Melting
- Li, Yang
- Analysis of seismic response on linear viscous damping energy dissipation frame structure
- Lin, Chenglong
- Research On Windage Yaw Of V-Type Composite Insulators In Ultra-High Voltage
- Liu, Daowei
- An Improved Lightweight RFID Mutual-authentication Protocol
- Liu, Ronggui
- Optimization of Porous Concrete containing Admixtures on Lighten Road
- Liu, Shujun
- Advances of Magnetic Memory Testing Technology
- Liu, Shujun
- Study on Magnetic Memory Testing Signal Characteristics of Pipeline Defects Based on Wavelet Packet Analysis
- Liu, Shujun
- The Study of the Magnetic Memory's Magneto-Mechanical Coupled Effect Based on ANSYS
- Liu, Shunguang
- Testing and Representation of Strain Rate Sensitive Mechanical Properties of Epoxy Resin
- Liu, Xiaomeng
- Numerical investigation on the effect of inlet acceleration on inlet flow distortion in a centrifugal fan
- Lu, Hongbin
- Study on Application of the Autoclaved Sand-Lime Brick in Masonry Structure of villages and towns
- Lu, Jiezhi
- Peridynamic Modeling of plain concrete structures under monotonic loading
- Lunak, Miroslav
- Impact-Echo Method Used to Testing of High Temperature Degraded Concrete Composite of Portland Cement CEM I 42.5 R and Gravel Aggregate 8/16
- Luo, Liyun
- An Improved Lightweight RFID Mutual-authentication Protocol
- Luo, Xianyan
- Elastic-plastic time-history analysis of bridge seismic based on Opensees and IDA
- Lv, Yan
- Study on the flexible Rayleigh waves comb transducer with non-equidistant interval based on PZT
- MA, Xinbo
- Damping Force Control of A Semi-active Suspension System Using Cuckoo Search Optimized PID Method
- Ma, Dawei
- Research on the burning rate coefficient on the interior ballistics of gas ejection power system
- Ma, Jinjun
- Investigation on the characterization and properties of EH36 steel FCB welded joint
- Mabena, Siphiwe
- Effects of Automation on Construction Industry Performance
- Mahamood, Rasheedat M.
- Gas Flow Rate and Scanning Speed influence on microstructure and Microhardness Property of Laser Metal Deposited Titanium-alloy
- Mahamood, Rasheedat M.
- Influence of Powder Flow Rate on Properties of Laser Deposited Titanium Alloy -Ti6Al4V
- Min, Zhang
- Analysis of seismic response on linear viscous damping energy dissipation frame structure
- Mun, Sang Don
- Design and Analysis of Pressure Vessel According to Internal Design Pressure and Temperature Using FEM
- Musonda, Vincent
- Effect of Water flow Rate on the Yield Strength of a Reinforced bar
- Nakazumi, Tmonka
- Activation energy of the soluble-insoluble self-oscillation in an autonomous polymer chain
- Nakazumi, Tomoka
- Effect of strong acid on the self-oscillating behavior for the polymer chain with the Fe(bpy)
- Nam, Byung-Hee
- A study on the wind-induced vibration response material characteristics of typical and atypical high-rise buildings according to changes in corner shapes material
- Nikita Yu., Tsybin
- The contact layer method in the problem of bending of a multilayer beam. Fourier series solution
- Nikolay, Laskov
- Crane Runway Beams: Endurance Test
- Niu, Ben
- Investigation on the characterization and properties of EH36 steel FCB welded joint
- Niu, Yu
- Reliability evaluation of distribution network with distributed generation
- Oke, Ayodeji
- Review of the Application of Nanotechnology for Sustainable Construction Materials
- Oke, Ayodeji
- Effects of Automation on Construction Industry Performance
- Olorunfemi, R. T
- Preventive measures for ICT critical infrastructure: a review
- Paek, Sun-Young
- A study on the wind-induced vibration response material characteristics of typical and atypical high-rise buildings according to changes in corner shapes material
- Pan, Qing
- Testing and Representation of Strain Rate Sensitive Mechanical Properties of Epoxy Resin
- Pang, Da-Chen
- Research on the Measuring System of Polymer-based Capacitive Micromachined Ultrasonic Transducer Array for Circular Planar Target
- Park, Joo Hyun
- Design and Analysis of Pressure Vessel According to Internal Design Pressure and Temperature Using FEM
- Peng, Liqiang
- Material Selection and Analysis of Oil Film Pressure for the Floating Ring Bearing of Turbocharger
- Peng, Yi-Hong
- Light-Weight Perlite Medium Cultivation of Plants used in Extensive Green Roof Feasibility Studies
- Popov, Ivan
- Experimental Investigation of Fly Ash and Water Content on the Internal Friction of Concrete
- Potop, Vladimir
- Improving Sports Technique of Key Elements in Dismounts on Uneven Bars Based Biomechanical Indicators
- Puppio, Mario Lucio
- Seismic response of a stock of social housings in Italy with r.c. and masonry materials.
- Qi, Hai
- Effects of Hot Isostatic Pressing on Microstructure and Mechanical Properties of Hastelloy X Samples Produced by Selective Laser Melting
- Quanlin, Dong
- Numerical investigation on the effect of inlet acceleration on inlet flow distortion in a centrifugal fan
- Robert A., Turusov
- The contact layer method in the problem of bending of a multilayer beam. Fourier series solution
- Rossikhin, Yury
- Experimental Investigation of Fly Ash and Water Content on the Internal Friction of Concrete
- Rui, Chen
- Investigation on the characterization and properties of EH36 steel FCB welded joint
- SHI, Lei
- Vibration Characteristic Analysis of the Cross-type Joint and Rzeppa Joint of the SS400 Transmission Shaft on Micro-vehicle
- Sanusi, Kazeem O
- Measurement of hardness and properties of copper alloy processed by friction stir process
- Sanusi, Kazeem O.
- Modelling the influence of friction coefficient on materials process by Equal Channel Angular Press technique
- Sassu, Mauro
- Seismic response of a stock of social housings in Italy with r.c. and masonry materials.
- Semenya, Kgothatso
- Review of the Application of Nanotechnology for Sustainable Construction Materials
- Sergey, Klyuev
- Construction survey objects agro industrial complex with system approach
- Shi, Zhanqun
- Material Selection and Analysis of Oil Film Pressure for the Floating Ring Bearing of Turbocharger
- Shitikova, Marina
- Experimental Investigation of Fly Ash and Water Content on the Internal Friction of Concrete
- Sitnikova, Elena
- Testing and Representation of Strain Rate Sensitive Mechanical Properties of Epoxy Resin
- Stanescu, Marius
- Improving Sports Technique of Key Elements in Dismounts on Uneven Bars Based Biomechanical Indicators
- Stute, K.
- Needleless electrospinning of PEO nanofiber mats
- Sulatchaneenopdon, Narongdet
- Effect of experimental design parameters on mechanical properties of braided stentriever made from shape memory alloy
- Sun, Minghui
- Comparison on modifications of vanadium oxide thin films by single-walled and multi-walled carbon nanotubes
- Sun, Xu
- Study on Integrated Control of Active Anti-Roll Steel Bar and Electronic Stability Program Based on Particle Swarm Optimization
- Sydorets, Volodymyr
- Analysis of the Current State of the Processes of Hybrid Laser-Plasma Welding
- Tang, Daibin
- Formation Mechanisms of Electron Beam Processed Surface Textures on Titanium Alloys
- Tang, Ting
- Comparison of Two Procedures in Application of Numerical Simulation of Shallow Water Explosion in Multi-material Media
- Tao, Zhangzhi
- Realization of Maneuver trajectory in Computer wargaming system based on an Improved A* Algorithm
- Timnea, Olivia Carmen
- Improving Sports Technique of Key Elements in Dismounts on Uneven Bars Based Biomechanical Indicators
- Tu, Te-Wen
- Finite Element Analysis of Cracked Flexible Pavements Embedded with Controlled Low-Strength Material Bases
- Twala, B
- Preventive measures for ICT critical infrastructure: a review