Proceedings of the Second International Conference on Mechanics, Materials and Structural Engineering (ICMMSE 2017)
249 authors
- Aigbavboa, Clinton
- Review of the Application of Nanotechnology for Sustainable Construction Materials
- Aigbavboa, Clinton
- Effects of Automation on Construction Industry Performance
- Ainur, Kabylzhan
- Controlling the Parameters of Process of Drilling Wells Using Mathematical Modeling
- Akinlabi, Esther
- Effect of Water flow Rate on the Yield Strength of a Reinforced bar
- Akinlabi, Esther T
- Measurement of hardness and properties of copper alloy processed by friction stir process
- Akinlabi, Esther T.
- Modelling the influence of friction coefficient on materials process by Equal Channel Angular Press technique
- Akinlabi, Esther T.
- Microstructural Evolution during Laser Processing of Titanium Alloy
- Akinlabi, Esther T.
- Gas Flow Rate and Scanning Speed influence on microstructure and Microhardness Property of Laser Metal Deposited Titanium-alloy
- Akinlabi, Esther T.
- Influence of Powder Flow Rate on Properties of Laser Deposited Titanium Alloy -Ti6Al4V
- Akinlabi, Stephen A.
- Microstructural Evolution during Laser Processing of Titanium Alloy
- Baek, Yong
- Evaluation of Cavity Exploration Technology to deal with Ground Subsidence in Urban Area
- Baex, Yong
- Analysis of the characteristics in variation of groundwater level in consideration of geological property during excavation in urban area
- Bodnarova, Lenka
- Impact-Echo Method Used to Testing of High Temperature Degraded Concrete Composite of Portland Cement CEM I 42.5 R and Gravel Aggregate 8/16
- Bonannini, Elisa
- Seismic response of a stock of social housings in Italy with r.c. and masonry materials.
- Bouassida, Mounir
- Use of Recharge Impulse Technology in Deep Foundations Set-up
- Bouassida, Wafi
- Use of Recharge Impulse Technology in Deep Foundations Set-up
- Brooks, Richard
- The Performance of 2.5D Woven Polymeric Matrix Composites under Ballistic Impact Loadings
- Bui, Gia Thinh
- Research on the Measuring System of Polymer-based Capacitive Micromachined Ultrasonic Transducer Array for Circular Planar Target
- Bushma, Oleksandr
- Analysis of the Current State of the Processes of Hybrid Laser-Plasma Welding
- Cen, Cheng-xian
- Experimental Study on the Change of Mechanical Properties of Mechanism Sand Mortar Subjected to High Temperature
- Cha, Jang-Hwan
- Analysis of the characteristics in variation of groundwater level in consideration of geological property during excavation in urban area
- Chang, Ta-Peng
- Experimental Investigation of Fly Ash and Water Content on the Internal Friction of Concrete
- Chen, Chiou-Chuan
- Light-Weight Perlite Medium Cultivation of Plants used in Extensive Green Roof Feasibility Studies
- Chen, Hong Mei
- Advanced Shape Memory Technology for Comfort Fitting
- Chen, Song
- Study on Integrated Control of Active Anti-Roll Steel Bar and Electronic Stability Program Based on Particle Swarm Optimization
- Chen, Song
- Study on Vehicle Instability Control Based on Hydraulic coordinator of Electronic Stability Program and Anti-lock Brake System
- Chen, Zhijun
- Peridynamic Modeling of plain concrete structures under monotonic loading
- Cheng, Miaomeng
- Comparison on modifications of vanadium oxide thin films by single-walled and multi-walled carbon nanotubes
- Cheng, Xiang ping
- Strain resistors method test the magnetostrictive property of FebacCu1Nb3Si15.5B7/Silicone rubber compound film
- Chiang, Yu-Hsuan
- Research on the Measuring System of Polymer-based Capacitive Micromachined Ultrasonic Transducer Array for Circular Planar Target
- Chobolacc, Zdenek
- Impact-Echo Method Used to Testing of High Temperature Degraded Concrete Composite of Portland Cement CEM I 42.5 R and Gravel Aggregate 8/16
- Cinotti, Marco
- Seismic response of a stock of social housings in Italy with r.c. and masonry materials.
- Cretu, Marian
- Improving Sports Technique of Key Elements in Dismounts on Uneven Bars Based Biomechanical Indicators
- De, Wang
- Strain resistors method test the magnetostrictive property of FebacCu1Nb3Si15.5B7/Silicone rubber compound film
- Defalco, Marcello
- Phase Change Material as Energy Material for Cold Storage and its integration in Civil Air Conditioning Systems: material properties and on field application
- Deng, Ming
- Fatigue analysis of cracks at the rib-to-deck welded joint of orthotropic steel deck accounting for the influence of compressive stress in cyclic loading
- Dong, Chunli
- Analysis of the Current State of the Processes of Hybrid Laser-Plasma Welding
- Dong, Qi
- Comparison of Two Procedures in Application of Numerical Simulation of Shallow Water Explosion in Multi-material Media
- Du, Qing
- Fatigue analysis of cracks at the rib-to-deck welded joint of orthotropic steel deck accounting for the influence of compressive stress in cyclic loading
- Du, Xiaoqiong
- A New Family of Explicit Time Integration Algorithms with Controllable Accuracy for Structural Dynamics
- Dvorak, Richard
- Impact-Echo Method Used to Testing of High Temperature Degraded Concrete Composite of Portland Cement CEM I 42.5 R and Gravel Aggregate 8/16
- Ehrmann, A.
- Needleless electrospinning of PEO nanofiber mats
- Elena, Sitnikova
- The Performance of 2.5D Woven Polymeric Matrix Composites under Ballistic Impact Loadings
- Feng, Guang
- Reliability evaluation of distribution network with distributed generation
- Fu, Pengfei
- Formation Mechanisms of Electron Beam Processed Surface Textures on Titanium Alloys
- Fuwen, Hu
- Vision modeling optimization of freely placed and moving objects
- Gong, Jie
- Fatigue Crack Growth Life Prediction of Screw Blade in Screw Sand Washing Machine based on Austen Growth Law
- Gong, Jinghai
- Optimization of Porous Concrete containing Admixtures on Lighten Road
- Grothe, T.
- Needleless electrospinning of PEO nanofiber mats
- Großerhode, C.
- Needleless electrospinning of PEO nanofiber mats
- Gu, Yu
- Comparison on modifications of vanadium oxide thin films by single-walled and multi-walled carbon nanotubes
- Guangxiu, Fang
- The Technology of Deepening Construction and Temperature Crack Control of Mass Concrete
- Gullazata, Dairbayeva
- Controlling the Parameters of Process of Drilling Wells Using Mathematical Modeling
- Hamdi, Essaieb
- Use of Recharge Impulse Technology in Deep Foundations Set-up
- Hamiyanze, Moonga Kando
- Numerical Analysis of the Cold Gas Dynamic Spray Surface Coating Process
- Han, Fei
- Reliability evaluation of distribution network with distributed generation
- Hao, Yuhang
- Study on Application of the Autoclaved Sand-Lime Brick in Masonry Structure of villages and towns
- Hara, Yusuke
- Activation energy of the soluble-insoluble self-oscillation in an autonomous polymer chain
- Hara, Yusuke
- Effect of strong acid on the self-oscillating behavior for the polymer chain with the Fe(bpy)
- Hauser, T.
- Needleless electrospinning of PEO nanofiber mats
- He, Cunfu
- Study on the flexible Rayleigh waves comb transducer with non-equidistant interval based on PZT
- He, Dean
- Advances of Magnetic Memory Testing Technology
- He, Dean
- Study on Magnetic Memory Testing Signal Characteristics of Pipeline Defects Based on Wavelet Packet Analysis
- He, Dean
- The Study of the Magnetic Memory's Magneto-Mechanical Coupled Effect Based on ANSYS
- He, Jiangshan
- Study on Application of the Autoclaved Sand-Lime Brick in Masonry Structure of villages and towns
- He, Qiong
- Comparison on modifications of vanadium oxide thin films by single-walled and multi-walled carbon nanotubes
- Hela, Rudolf
- Impact-Echo Method Used to Testing of High Temperature Degraded Concrete Composite of Portland Cement CEM I 42.5 R and Gravel Aggregate 8/16
- Heng, Lida
- Design and Analysis of Pressure Vessel According to Internal Design Pressure and Temperature Using FEM
- Hongbin, Jia
- The Technology of Deepening Construction and Temperature Crack Control of Mass Concrete
- Hou, Huipeng
- Effects of Hot Isostatic Pressing on Microstructure and Mechanical Properties of Hastelloy X Samples Produced by Selective Laser Melting
- Huang, Feng-Yun
- Vibration Characteristic Analysis of the Cross-type Joint and Rzeppa Joint of the SS400 Transmission Shaft on Micro-vehicle
- Huang, Li-Jeng
- Viscoelastic Analysis of Flexible Pavements Embedded with Controlled Low-Strength Material Bases Using Finite Element Method
- Huang, Li-jeng
- Finite Element Analysis of Cracked Flexible Pavements Embedded with Controlled Low-Strength Material Bases
- Huang, Wei Min
- Advanced Shape Memory Technology for Comfort Fitting
- Huang, Wen-Ling
- Viscoelastic Analysis of Flexible Pavements Embedded with Controlled Low-Strength Material Bases Using Finite Element Method
- Huang, Wenjuan
- Optimization of Porous Concrete containing Admixtures on Lighten Road
- Huo, Ningfei
- Fatigue analysis of cracks at the rib-to-deck welded joint of orthotropic steel deck accounting for the influence of compressive stress in cyclic loading
- Igor, Garkin
- Construction survey objects agro industrial complex with system approach
- Igor, Garkin
- Crane Runway Beams: Endurance Test
- Irina, Garkina
- Construction survey objects agro industrial complex with system approach
- Ivan A., Potokhin
- Equal Strength and Equal Stress Structures. Models and Reality
- Jang, Ho-Myun
- A study on the wind-induced vibration response material characteristics of typical and atypical high-rise buildings according to changes in corner shapes material
- Jen, Tien-Chen
- Numerical Analysis of the Cold Gas Dynamic Spray Surface Coating Process
- Jen, Tien-Chien
- Effect of Water flow Rate on the Yield Strength of a Reinforced bar
- Jiang, Ming
- Advances of Magnetic Memory Testing Technology
- Jiang, Ming
- Study on Magnetic Memory Testing Signal Characteristics of Pipeline Defects Based on Wavelet Packet Analysis
- Jiang, Ming
- The Study of the Magnetic Memory's Magneto-Mechanical Coupled Effect Based on ANSYS
- Jiang, Yadong
- Comparison on modifications of vanadium oxide thin films by single-walled and multi-walled carbon nanotubes
- Jiang, Zexin
- Investigation on the characterization and properties of EH36 steel FCB welded joint
- Kern, P.
- Needleless electrospinning of PEO nanofiber mats
- Khantachawana, Anak
- Effect of experimental design parameters on mechanical properties of braided stentriever made from shape memory alloy
- Kharine, Youri
- Use of Recharge Impulse Technology in Deep Foundations Set-up
- Khaskin, Vladyslav
- Analysis of the Current State of the Processes of Hybrid Laser-Plasma Welding
- Kim, Dong-Min
- Evaluation of Cavity Exploration Technology to deal with Ground Subsidence in Urban Area
- Kim, Min Soo
- Design and Analysis of Pressure Vessel According to Internal Design Pressure and Temperature Using FEM
- Kim, Woo-Seok
- Evaluation of Cavity Exploration Technology to deal with Ground Subsidence in Urban Area
- Kim, Woo-Seok
- Analysis of the characteristics in variation of groundwater level in consideration of geological property during excavation in urban area
- Kirill, Nezdanov
- Crane Runway Beams: Endurance Test
- Kong, Weiyi
- The Performance of 2.5D Woven Polymeric Matrix Composites under Ballistic Impact Loadings
- Kong, Weiyi
- Testing and Representation of Strain Rate Sensitive Mechanical Properties of Epoxy Resin