Proceedings of the 2019 International Conference on Electronical, Mechanical and Materials Engineering (ICE2ME 2019)
203 authors
- An, Yantao
- Research on Detection Methods of Steel Defects Based on Modal Analysis
- Cai, Ganwei
- Modal Test of Welding Robot Linkage Mechanism-Modal Interval of posture in continuous dynamic state
- Chang, Ing-Lin
- Preparation of New Acellular Dermal Collagen Scaffolds via Combination of Phytoproteinases and Supercritical Carbon Dioxide Treatments
- Chang, Ing-Lin
- Collagen Films with Extra Cellular Matrix via Combination of Supercritical Carbon Dioxide Fluid and NH4OH Treatments
- Chang, Ing-Lin
- New Collagen Scaffolds with Extra Cellular Matrix Derived from Treatments of Supercritical Fluid and Protease in Low Temperature
- Chang, Ing-Lin
- Characteristics and Micromorphology of New Collagen Scaffolds Derived from Supercritical Fluid of Carbon Dioxide with Alcohol Cosolvents
- Chang, Ing-Lin
- Design and Preparation of Novel Anti-adhesion Extra Thin Polyvinyl Alcohol Foam Dressings for NPWT via a Combined Procedure of Ultra Precision Machining and Super Clean Air-foaming
- Chang, Ing-Lin
- Design and Preparation of Novel Cross-linked Polyvinyl Alcohol Extra Permeable Foam Dressings for NPWT via a Combined Process of Super Clean Air foaming and Ultra Precision Machining
- Chen, Fangjian
- Durability of Polypropylene Fiber Concrete Exposed to Freeze-Thaw Cycles with Deicing Salts
- Chen, Kuan-Ta
- Preparation of New Acellular Dermal Collagen Scaffolds via Combination of Phytoproteinases and Supercritical Carbon Dioxide Treatments
- Chen, Manjiao
- Effect of Welding Spot Diameter and Arrangement on Fatigue Life of Corrugated Plate Component
- Chen, Pingting
- Cooperative Game of Income Allocation of Shell-egg Industry Supply Chain
- Chen, Shu
- Design of a Meander Line Dipole RFID Tag Antenna for Temperature Sensor
- Chen, Shujun
- Predictive Modeling of Surface Roughness Based on Response Surface Methodology after WAAM
- Chen, Yitao
- Study on Flexible Bending Process of Sheet Metal and Its Production Equipment
- Chen, Zhiqiang
- Synthesis and Characterization of Flower-like Clewed PbTiO3 Nanowires Prepared by Hydrothermal Method
- Cheng, Junwen
- Failure Analysis and Detection Technology Research of Hub Bolts of Aircraft Main Wheel
- Cho, Youngjun
- Improvement of the Gas Pipe Structure Using the Flow Analysis in Ultra Large Container Vessel
- Choi, Sungmin
- Improvement of the Gas Pipe Structure Using the Flow Analysis in Ultra Large Container Vessel
- Ciou, Tse-wei
- Preparation of New Acellular Dermal Collagen Scaffolds via Combination of Phytoproteinases and Supercritical Carbon Dioxide Treatments
- Cui, Xiaoping
- Synthesis and Characterization of High Performance Thermoplastic Polyimide Used the Anti-riot Bomb
- Deng, Yu
- Synthesis and Characterization of Flower-like Clewed PbTiO3 Nanowires Prepared by Hydrothermal Method
- Du, Suyu
- Effect of Different Enzymes Deactivation Methods on the Quality of Seepweed Tea
- Du, Tianyu
- Welding Residual Stress Characteristics of Bolt-welding Joint in TBM Split Cutterhead
- Feng, Xinru
- Design of Vehicle Safety Belt Motion Detection Platform Based on Digital PID Regulation
- Feng, Yanpeng
- Failure Analysis and Detection Technology Research of Hub Bolts of Aircraft Main Wheel
- Fu, Jing
- Cooperative Game of Income Allocation of Shell-egg Industry Supply Chain
- Gao, Peng
- Welding Residual Stress Characteristics of Bolt-welding Joint in TBM Split Cutterhead
- Gao, Qingshui
- Parameter Identification for the Impulse Response Signal of Transmission Tower Containing Double Frequencies
- Gao, Weiliang
- A Design of Frequency Synthesizer based on DDS for Ka-band Radar Signal Simulation
- Guo, Shuaishuai
- Simulation Study on Characteristics of Gas Combustion and Explosion in Pipeline
- Guo, Zhong
- Welding Residual Stress Characteristics of Bolt-welding Joint in TBM Split Cutterhead
- Han, Junsu
- Improvement of the Gas Pipe Structure Using the Flow Analysis in Ultra Large Container Vessel
- Han, Sulan
- Parametric System Design of Belt Conveyor Legs Based on SolidWorks
- He, Fuqiang
- Optimization of Spiral Shaft Parameters of Particle Type Conveyor Based on Particle Swarm Optimization
- He, Qingzhong
- Effect of Welding Spot Diameter and Arrangement on Fatigue Life of Corrugated Plate Component
- He, Yongqiang
- Shear Strength Characteristics of Loess Reinforced with Tire Derived Aggregate
- Ho, Yi-hung
- Characteristics and Micromorphology of New Collagen Scaffolds Derived from Supercritical Fluid of Carbon Dioxide with Alcohol Cosolvents
- Hu, Haifeng
- Modal Analysis and Research of Orthogonal Rib-Stiffened Sandwich Plates
- Hu, Hsiao-Chih
- Collagen Films with Extra Cellular Matrix via Combination of Supercritical Carbon Dioxide Fluid and NH4OH Treatments
- Hu, Jun
- Macro Micro - Coupling Simulation Front - End Processing Tools Based on SALOME Platform
- Hu, Yi
- Integrated Cockpit Simulation Design for Civil Aircraft Alerting System
- Hua, Chunli
- Research on the Dynamic Characteristics of High-Speed Elevator System
- Huang, Baoxin
- Properties of Nd Doped La0.5Ba0.5CoO3 Pervoskite
- Huang, Ching-Cheng
- Preparation of New Acellular Dermal Collagen Scaffolds via Combination of Phytoproteinases and Supercritical Carbon Dioxide Treatments
- Huang, Ching-Cheng
- Collagen Films with Extra Cellular Matrix via Combination of Supercritical Carbon Dioxide Fluid and NH4OH Treatments
- Huang, Ching-Cheng
- New Collagen Scaffolds with Extra Cellular Matrix Derived from Treatments of Supercritical Fluid and Protease in Low Temperature
- Huang, Ching-Cheng
- Characteristics and Micromorphology of New Collagen Scaffolds Derived from Supercritical Fluid of Carbon Dioxide with Alcohol Cosolvents
- Huang, Ching-Cheng
- Design and Preparation of Novel Anti-adhesion Extra Thin Polyvinyl Alcohol Foam Dressings for NPWT via a Combined Procedure of Ultra Precision Machining and Super Clean Air-foaming
- Huang, Ching-Cheng
- Design and Preparation of Novel Anti-adhesion Polyvinyl Alcohol Foam Nasal Matrix for PM 2.5 Protecting and Hemostasis Treatments via a Combined Procedure of Precision Machining and Super Clean Air-foaming
- Huang, Ching-Cheng
- Design and Preparation of Novel Cross-linked Polyvinyl Alcohol Extra Permeable Foam Dressings for NPWT via a Combined Process of Super Clean Air foaming and Ultra Precision Machining
- Huang, Jianjun
- A Geometric Distortion Rectification Method for Wide Field of View Camera
- Huang, Jimin
- Simulation Study on Characteristics of Gas Combustion and Explosion in Pipeline
- Huang, Qibai
- Vibration Characteristics Analysis of Orthogonal Stiffened Thin Plate with the Viscoelastic Damping Topology Distribution
- Huang, Qibai
- Modal Analysis and Research of Orthogonal Rib-Stiffened Sandwich Plates
- Huang, Shu
- Study on Flexible Bending Process of Sheet Metal and Its Production Equipment
- Huang, Xinna
- Singular Strain Field for Composite Materials
- Huang, Yizhe
- Modal Test of Welding Robot Linkage Mechanism-Modal Interval of posture in continuous dynamic state
- Huang, Yizhe
- Vibration Characteristics Analysis of Orthogonal Stiffened Thin Plate with the Viscoelastic Damping Topology Distribution
- Ji, Hong
- Design and Application of Handheld Handle Interaction Based on Unity 3D
- Jia, Cheng
- Singular Strain Field for Composite Materials
- Jia, Purong
- Singular Strain Field for Composite Materials
- Jiang, Bingkun
- A Usage Model of the Aeronautical Technical Equipment in Wartime of Local Armed Conflicts
- Jin, Ge
- The Research on Delay Suppression of Steam Turbine Overshoot Coefficient Feedforward Control
- Kalyaev, A.I.
- A Modified Method of Multiagent Resource Dispatching in a Heterogeneous Cloud Environment
- Kalyaev, A.I.
- Multiagent Resource Dispatching in a Heterogeneous Cloud Environment
- Kalyaev, I.A.
- A Modified Method of Multiagent Resource Dispatching in a Heterogeneous Cloud Environment
- Kalyaev, I.A.
- Multiagent Resource Dispatching in a Heterogeneous Cloud Environment
- Kang, Hyungjoo
- UUV's Hydrodynamic Modeling and its Simulation and Experimental Studies
- Kang, Xin
- Effect of Different Enzymes Deactivation Methods on the Quality of Seepweed Tea
- Ki, Geonhui
- UUV's Hydrodynamic Modeling and its Simulation and Experimental Studies
- Kim, Jongwon
- Improvement of the Gas Pipe Structure Using the Flow Analysis in Ultra Large Container Vessel
- Kim, Min-Gyu
- UUV's Hydrodynamic Modeling and its Simulation and Experimental Studies
- Korovin, I.S.
- A Modified Method of Multiagent Resource Dispatching in a Heterogeneous Cloud Environment
- Korovin, I.S.
- Multiagent Resource Dispatching in a Heterogeneous Cloud Environment
- Lee, Mun-Jik
- UUV's Hydrodynamic Modeling and its Simulation and Experimental Studies
- Lee, Tzu-Pei
- New Collagen Scaffolds with Extra Cellular Matrix Derived from Treatments of Supercritical Fluid and Protease in Low Temperature
- Li, Chuanqiao
- Research on the Dynamic Characteristics of High-Speed Elevator System
- Li, Chunguang
- Failure Analysis and Detection Technology Research of Hub Bolts of Aircraft Main Wheel
- Li, Dalong
- A Design of Frequency Synthesizer based on DDS for Ka-band Radar Signal Simulation
- Li, Fang
- Predictive Modeling of Surface Roughness Based on Response Surface Methodology after WAAM
- Li, Fei
- Integrated Cockpit Simulation Design for Civil Aircraft Alerting System
- Li, Honghan
- Modal Test of Welding Robot Linkage Mechanism-Modal Interval of posture in continuous dynamic state
- Li, Ji-Hong
- UUV's Hydrodynamic Modeling and its Simulation and Experimental Studies
- Li, Jing
- Design and Application of the Missile Combat Training Simulation System
- Li, Jun
- Effect of Different Enzymes Deactivation Methods on the Quality of Seepweed Tea
- Li, Lu
- Design and Application of Handheld Handle Interaction Based on Unity 3D
- Li, Qin
- Effect of Different Enzymes Deactivation Methods on the Quality of Seepweed Tea
- Li, Tong
- A Geometric Distortion Rectification Method for Wide Field of View Camera
- Li, Xue
- Effect of Different Enzymes Deactivation Methods on the Quality of Seepweed Tea
- Li, Zhaohui
- Shear Strength Characteristics of Loess Reinforced with Tire Derived Aggregate
- Lin, Ying
- Design of a Meander Line Dipole RFID Tag Antenna for Temperature Sensor
- Liu, Changsheng
- An Environmentally Friendly Passivation Technology for the Water-cooling Process of Batch Hot-dip Galvanization
- Liu, Chuan
- A Software-Defined Traffic Differential Protection Mechanism of Power Grid Communication Networks
- Liu, Guangyao
- Vibration Characteristics Analysis of Orthogonal Stiffened Thin Plate with the Viscoelastic Damping Topology Distribution
- Liu, Guohua
- Preparation and Properties of Photo-responsive Controlled Release Pesticide Film
- Liu, He
- Effect of Different Enzymes Deactivation Methods on the Quality of Seepweed Tea
- Liu, Hongtao
- Integrated Cockpit Simulation Design for Civil Aircraft Alerting System
- Liu, Qunying
- Application of the XGBOOST on the Assessment of Transient Stability of Power System
- Liu, Shidong
- A Software-Defined Traffic Differential Protection Mechanism of Power Grid Communication Networks