Proceedings of the 2015 International Conference on Advanced Engineering Materials and Technology
616 authors
- Li, Ying-Min
- Research on the Preparation Process of New Animal Glue Binder Used in Foundry
- Li, Yong
- Preparation and Photoluminescence Investigation of Organic-inorganic Hybrid Materials of Complex Ag2ClO5N5C28H22
- Li, Yong
- Syntheses and Characterization of Luminescent Materials of Compound ZnO6N2C29H28
- Li, Yongpeng
- Research on Hysteretic Behavior of T-Type RHS Joints with Inner Stiffened Plate
- Li, Yu
- Plastics Pyrolysis and Two-stage Coliquefaction of Coal-plastic Mixtures
- Li, Yu Ping
- Study on uptake of PLA-Pluronic P85-PLA nanoparticles with Caco-2 cells
- Li, Ze
- Technology of Decreasing Injection Pressure and Increasing Injection Rate by Surfactant in CS block of Chaoyanggou Oilfield
- Li, Ze
- Size Optimization of Asphalt Particles for Profile Control in Lamadian Oilfield P Reservoir
- Li, Zhao-Dong
- Study on the internal flow law of cross wedge rolling of aluminum alloy based on finite element analysis
- Li, Zheng
- Efficient Removal of Micropollutants in Rainwater by New Vacuum Ultraviolet
- Li, Zhiqing
- Effect and Impact on Performance of Concrete of Migration Type Rust Inhibitor
- Li, Zhiyi
- The preparation of core-shell structural ZnO@4A nano-materials
- Li, Zhongqun
- Prediction of Chatter Stability for Milling Process Using an Improved Semi-discretization Method
- Li, Zimu
- Six degrees of freedom arc welding robot off-line programming based on MATLAB
- Lian, Minglei
- Plastics Pyrolysis and Two-stage Coliquefaction of Coal-plastic Mixtures
- Lian, Zhongxu
- The improvement of the aluminum alloy 6061 surface hydrophobic property by using wire cut electrical discharge machining
- Lian, Zuozheng
- Research on Multi-Agent system for embedded mobile devices business applications
- Lin, Dong
- Coating PAMAM dendrimer onto PDMS microfluidic chip to resist nonspecific Biomolecules adsorption
- Lin, Xiumu
- Assembly line balancing based on a genetic algorithm
- Liu, Gousheng
- Molecular Dynamics Simulation of the Interaction of Cationic Collectors on the Mica (001) Surface
- Liu, Gousheng
- The Microscopic Structure and Adsorption Performance of Amide Ions on the Mica (001) Surface
- Liu, Hai.Ying.
- Modeling and predicting the membrane water content of proton exchange membrane fuel cell by using support vector regression
- Liu, Haitao
- Intrinsic Kinetics of Dehydrogenation of Isobutane over K2O-CuO-Cr2O3/Al2O3 Catalyst
- Liu, Huaqing
- Infochemicals for the chromatographic separation technology
- Liu, Hui
- Study on Calculation of PVT Properties of CO2 in Supercritical States
- Liu, Jianbo
- A Discussion on Calculation Methods for Deepwater Wave Elements of Coastal Engineering
- Liu, Jiefu
- Comparison between five typical reinforced honeycomb structures
- Liu, Jinchun
- Active vibration control of periodic disturbance based on the lattice notch filter
- Liu, Jiping
- A Novel Spirocyclic Halogen-Free Flame Retardant: Synthesis and Flammability Characteristics in Epoxy Resin Composites
- Liu, Jiping
- Study on Crystal Structure and Thermal Behavior of Sodium Tetrazolate and Sodium 5-Chlorotetrazolate
- Liu, Jiping
- Flame retardancy and thermal degradation mechanism of epoxy resins composites based on a PEPA-substituted polyphosphoramide
- Liu, Kai
- The Design of the Security Supervision and Evaluation System of Construction Machines and Tools based on the Development of Microsoft Access
- Liu, Lingling
- A Multi-Dimensional Design Elements Extraction Method for Product Perceptual Image
- Liu, Peigui
- Study on Discharge Water with Consolidation of Clay Soil on Top of Confined Aquifer
- Liu, Qi
- Technique study on dynamic consolidation of collapsible loess foundation
- Liu, Qinggang
- Structure analysis and study of sticky and waterish material dryer
- Liu, Shumin
- The Perturbation Toxic Effect of Graphene on HepG2 Cell
- Liu, Tao
- Stiffness analysis method of rolling mill based on process data
- Liu, Tian-Long
- Creep behavior of ultra pure ferrite stainless steel 409M
- Liu, Wei
- Research on modeling method for small agriculture machine based on the ontology
- Liu, Wei-Hua
- Research on the Preparation Process of New Animal Glue Binder Used in Foundry
- Liu, Xianghua
- Composite inhibitor for gas hydrate in deepwater drilling
- Liu, Xiaolan
- Composite inhibitor for gas hydrate in deepwater drilling
- Liu, Xiaoqiu
- Synthesis of nitrogen-doped carbon nanofibers and its application for the electrochemical detection of dopamine
- Liu, Xiujie
- Use of membrane separation device for extraction of intracellular protein and DNA
- Liu, Yan
- Research on the performance of T-type RHS Joints
- Liu, Ying
- Friction and wear behavior of electro-deposition Ni-cBN composite coatings
- Liu, Ying
- Study on Preparation and Properties of ZrO2/Sepiolite composite
- Liu, Yu-Ping
- Study on catalytic epoxidation of olefins in ketone-hydrogen peroxide system
- Liu, Yuan
- Error Analysis on CNC gear hobbing Machine Spindle Transmission Chain Based on SOV Theory
- Liu, Yuelong
- Molecular Dynamics Simulation of the Interaction of Cationic Collectors on the Mica (001) Surface
- Liu, Yuelong
- The Microscopic Structure and Adsorption Performance of Amide Ions on the Mica (001) Surface
- Liu, Zhigang
- The improvement of the aluminum alloy 6061 surface hydrophobic property by using wire cut electrical discharge machining
- Liu, Zhilong
- Study on the dispersion degree of chopped carbon fibers dispersed in fluid medium by microscopic analysis
- Liu, Ziyu
- Study on parching procedure - acid leaching of Yunnan phosphogypsum decolorization mechanism based on Origin software
- Long, Ren
- Interface Reasoning Research Based on Manifestation Pattern & Cognitive Load
- Long, Shuping
- Development and Implementation of the Gear Design Parameters Automatic Generation System Based on VB
- Lou, Jingjun
- Active vibration control of periodic disturbance based on the lattice notch filter
- Lu, Jiangchangmei
- Effect of drying temperature on qualities of mint
- Lu, Ren
- Solvent Residues in Moon Cake Plastic Packaging Bags
- Lu, Shiqiang
- Stress-strain analysis of NC bending and springback process for 21-6-9 stainless steel tube
- Lu, Xi
- Recycling assessment and Test validation of Constant velocity drive shaft for Santana Automobile
- Lu, Ye
- Analysis on vascular bifurcation Y-type coronary artery based on hemodynamic
- Lu, Yi Heng
- Perfluorinated sulfonic acid ion-exchange membrane doped silicotungstic acid thermal stability and conductivity
- Lu, Yi-An
- Two different methods of cleaning and disinfection of endoscopy study of terminal disinfection
- Luan, Yun
- Research on modeling method for small agriculture machine based on the ontology
- Luo, L.-L.
- Research on Time-Temperature-Integrators of Meal-Ready-to-Eat Military Food Made by Thermo-sensitive Dyeing
- Luo, Ruizhi
- Fabrication of the pyramidal microstructure on silicon substrate using KOH solution
- Luo, Xiao
- Effects of a Forward Displaced Position on Driver Injury Levels in Frontal Crashes
- Lv, Nan
- The research of the single row piles designing in deep foundation pit
- Lv, Qiang
- The University Network Public Opinion Monitoring System Based on Multi-Agent
- Ma, Donghui
- Effect of TiH2 Particle Size on Aluminum foam Pore Structure
- Ma, Ge
- On the Softening Design of Living Environment Hard Factors: A Case Study of Yu Yuan Residential Quarter
- Ma, Junjun
- Fabrication of the pyramidal microstructure on silicon substrate using KOH solution
- Ma, Pingang
- CO2 Corrosion Behaviors of Tubing and Casing Steels in Simulation Produced Water for Deep Natural Gas Wells
- Ma, Shuang Chun
- Perfluorinated sulfonic acid ion-exchange membrane doped silicotungstic acid thermal stability and conductivity
- Ma, Weihong
- Microwave Absorption Performance of La0.9Y0.1MnO3 with Different Sintering Temperatures
- Ma, Wenhai
- CO2 Corrosion Behaviors of Tubing and Casing Steels in Simulation Produced Water for Deep Natural Gas Wells
- Ma, Yimin
- Structural Analysis of Mast of Special Rotary Drilling Rig for Transmission Line
- Ma, Yimin
- Topology Optimization Design of the Headstock of Large Rotation Mechanism
- Ma, Yingjuan
- Research on Seismic Behavior of Semi-rigid Steel Frame Structures With Eccentric Brace
- Ma, Yu-Qiang
- Developing of teaching experiment system for dynamically observing and measuring to cutting process
- Ma, Yue
- Effect of drying temperature on qualities of mint
- Man, Shi-Qing
- Fabrication of the pyramidal microstructure on silicon substrate using KOH solution
- Meng, Kai
- The Application of Particle Filtering in Dynamic Locating and Tracking of Intelligent Wheelchair
- Meng, Qingming
- Mud Cake Removing to Improve the Well Cementing Quality
- Meng, Shun
- Properties of heat-sealing BOPP film: effect of coating thickness and random copolymer content
- Min, Xuguang
- Stress-strain analysis of NC bending and springback process for 21-6-9 stainless steel tube
- Min, Yong'An
- Microstructure, Performance and Phase Study on T250 Maraging aging steel Pipe after Spinning and Aging
- Ning, Zhang
- Influence of Quenching Temperature on Transformation Regularity of Reinforced Body for WC/steel Matrix Composites
- Ning, Zhang
- Effect of the Coating Thickness to Ti(C N)/ Ni60A Composite Coating by Ultrasonic-assisted Argon-arc Clad Injection
- Niu, Wanyang
- Performance Research on Slag-Steel Slag Based Composite Portland Cement
- Niu, Wanyang
- Research on Elastic Modulus of Gangue Concrete
- Nong, Jiejing
- The preparation of core-shell structural ZnO@4A nano-materials
- Ou, Haining
- A Method for Rehabilitation of Hand Dysfunction by Cyber Glove
- Ouyang, Chunfa
- Effect of Polyamide 6 on Crystallization Nucleation Behavior and Mechanical Properties of Polyoxymethylene
- Pan, Yu
- Facile Preparation of Flexible, Optically Transparent Superhydrophobic Surfaces by Conjugated Microporous Polymer
- Peng, Fei
- The Design of the Security Supervision and Evaluation System of Construction Machines and Tools based on the Development of Microsoft Access
- Peng, Guanghui
- Structure analysis and study of sticky and waterish material dryer
- Peng, Lin
- Design and implementation of low coupling and high available mobile workflow for power operation