Proceedings of the International Conference of Mechanical Engineering (ICOME-2022)
251 authors
- Geonea, Ionut
- Analysis of Turning Process of Pure Titanium Using Finite Element Method
- Geonea, Ionut
- Analysis of Milling Process of Aluminum Alloy Using Finite Element Method
- Geonea, Ionut-Daniel
- Ellipse’s Versiera – Structure and Kinematics of the Generator Mechanism
- Geonea, Ionuț
- Consideration on New Application for Rotary Engine
- Gheorghe, Stefan
- Implementation of the Lean Manufacturing 6S Technique - Case Study
- Ghermec, Cristian
- Integrating the Circular Economy in Forming the Future Naval Engineers
- Ghermec, Olimpia
- Integrating the Circular Economy in Forming the Future Naval Engineers
- Grecu, Luminita
- Integrated AHP and SAW Methods for Selection Green Building Materials for Insulations
- Grigorie, Laura
- Stresses in Prosthetic Elbow Joint During Flexion-Extension Movement
- Gruionu, Gabriel
- Navigation Testing Procedures for the ENDORO Robotic System
- Gruionu, Lucian Gheorghe
- Navigation Testing Procedures for the ENDORO Robotic System
- Iacob, Andreea Valentina
- Navigation Testing Procedures for the ENDORO Robotic System
- Ilaș, Ștefan
- Selective Laser Sintering of Ti Alloy Powders for Hip Implants
- Iliescu, Mihaiela
- Selective Laser Sintering of Ti Alloy Powders for Hip Implants
- Ilija, Atanackovic
- Design and 3D Printing of a Mini Vacuum Table with FDM Technology
- Ionescu, Adriana
- Study on the Comfort Microclimate at the Educational Building in Research Laboratories
- Ionescu, Adriana
- Using Winkler Hypothesis in ETABS Software for the Case of Building Structures with Raft Foundation
- Ionescu, Adriana
- Software Application for Stiffness Relaxation New Method of Bouc-Wen Hysteresis Differential Model Used in Simulation of Romanian Friction Dampers
- Ionescu, Adriana
- Dynamic Seism Analysis of a Medium-Height Building Equipped with Two Variants of Anti-seismic Dampers
- Ionescu, Adriana
- New Strength Degradation of Bouc-Wen Hysteresis Differential Model for Romanian Anti-Seismic Devices Used in Buildings Seism Protection Systems
- Ionescu, Adriana
- Comparison Between the Results Obtained in Static and Modal Seism Simulations of Tall Buildings Using ETABS
- Ionica, Valeriu
- Applications of Some Extremal and Variational Problems to the Study of Vibrations in Mechanical Systems
- Ionita, Tiberiu Daniel
- Night-Time Experiments on Driving RHD Vehicles in LHD Traffic Conditions and Pedestrian Crossing Safety
- Ispas, Nicolae
- Night-Time Experiments on Driving RHD Vehicles in LHD Traffic Conditions and Pedestrian Crossing Safety
- Isvoranu, Florin
- Selective Laser Sintering of Ti Alloy Powders for Hip Implants
- Jeli, Zorana
- Analysis of a Four-Bar Linkage Mechanism in Its Classical and Compliant Form - A Comparison
- Malciu, Raluca
- Internal Turning of the Polytetrafluoroethylene (Teflon) at High Feed
- Malciu, Raluca
- Implementation of the Lean Manufacturing 6S Technique - Case Study
- Malciu, Raluca
- Study of the Influence of the Thermal Insulation System on the State of Stress, Deformation and Vibration of a Rehabilitated Building with a Structure of Reinforced Concrete Frames
- Marghitu, Dan B.
- Analyzing Double Pendulum Dynamics with Approximate Entropy and Maximal Lyapunov Exponent
- Margine, Alexandru
- Design of a Parameterized Mannequin Using Rapid Prototyping Technology
- Margine, Alexandru
- Kinematic and Dynamic Analysis of a Mechanism for Assisting Human Locomotion
- Margine, Alexandru
- Experimental Approaches Regarding a Children Rehabilitation Test Bed
- Marin, Robert Cristian
- Microwave Heating of Exhaust Systems from Combustion Engines for Improvement of After treatment Systems
- Marinache, Nicolae Mihai
- Study on the Comfort Microclimate at the Educational Building in Research Laboratories
- Marinescu, Gabriel Cătălin
- Analysis of a Cantilevered Beam Using FEMCAS
- Marinescu, Gabriel Cătălin
- Analysis of a Cantilevered Beam Under Parametric Uncertainties
- Matei, Lucian
- Peer-Review Statements
- Matei, Lucian
- Comparative Analysis of Pedestrian Throwing Distance Following a Collision with a Vehicle
- Midan, Angelo
- Evaluation of Residual Stress In Specific Welded Nodes of River Ships
- Midan, Angelo Andrei
- Intelligent Transport Systems Used in Inland Waterway Transport and Their Contribution to Pollution Prevention
- Minzatu, Corneliu
- Research Regarding of the Autonomy of the Electric Vehicles in WLTC Test Cycle
- Mitroi-Popa, Gheorghe
- Determination of the Probability of Failure of the Starter of a Passenger Car
- Mollova, Gergana
- Advanced Design Optimization Procedures for Worm Gear Drives
- Motoc, Dana Luca
- Night-Time Experiments on Driving RHD Vehicles in LHD Traffic Conditions and Pedestrian Crossing Safety
- Nasulea, Marius Daniel
- A Comparative Approach on Successive vs Simultaneous Drilling
- Negru, Mihai
- Software Application for Stiffness Relaxation New Method of Bouc-Wen Hysteresis Differential Model Used in Simulation of Romanian Friction Dampers
- Negru, Mihai
- New Strength Degradation of Bouc-Wen Hysteresis Differential Model for Romanian Anti-Seismic Devices Used in Buildings Seism Protection Systems
- Nicolicescu, Claudiu
- Implementation of the Lean Manufacturing 6S Technique - Case Study
- Nituleasa, Bogdan
- Night-Time Experiments on Driving RHD Vehicles in LHD Traffic Conditions and Pedestrian Crossing Safety
- Nișulescu, Valentin
- Research Regarding of the Autonomy of the Electric Vehicles in WLTC Test Cycle
- Nițu, Cristina-Marilena
- Selective Laser Sintering of Ti Alloy Powders for Hip Implants
- Oancea, Gheorghe
- A Comparative Approach on Successive vs Simultaneous Drilling
- Ogarca, Alexandru
- Design and 3D Printing of a Mini Vacuum Table with FDM Technology
- Olei, Adrian
- Evaluation of Residual Stress In Specific Welded Nodes of River Ships
- Olei, Adrian
- Differential Thermal Analysis in Microwave Hybrid Field of Some Composite Ceramic Materials
- Olei, Adrian Bebe
- Microwave Heating of Exhaust Systems from Combustion Engines for Improvement of After treatment Systems
- Olei, Adrian Bebe
- Analysis of CO₂ Emissions for a Supercharged Engine and a Series–Parallel Hybrid System
- Olei, Bebe-Adrian
- Intelligent Transport Systems Used in Inland Waterway Transport and Their Contribution to Pollution Prevention
- Oncescu, Alin
- Study of the Influence of Speed and Type of Roads on Vibrations Transmitted to an Electric Tractor Driver
- Oprica, Alexandru
- Study Concerning Contact Strain and Stresses in Radial-Axial Bearings
- Otat, Oana
- Experimental Stand to Investigate the Sealing Properties of Piston Rings Used in Automotive Industry
- Ozunu, Nichita
- FEM Analysis of a Robotic System Used in Concrete Spray Procedures
- Oţăt, Oana Victoria
- Comparative Analysis of Pedestrian Throwing Distance Following a Collision with a Vehicle
- Pampa, Veronica
- Night-Time Experiments on Driving RHD Vehicles in LHD Traffic Conditions and Pedestrian Crossing Safety
- Panduru, Dumitru
- Analysis of Turning Process of Pure Titanium Using Finite Element Method
- Panduru, Dumitru
- Analysis of Milling Process of Aluminum Alloy Using Finite Element Method
- Paraschiv, Mihai
- CAE Approach in Combustion Modeling on a Classic Internal Combustion Engine and Ignition Timing Modeling
- Parv, Luminita
- A Comparative Approach on Successive vs Simultaneous Drilling
- Pascu, Cristina Ileana
- Implementation of the Lean Manufacturing 6S Technique - Case Study
- Pascu, Ileana
- Internal Turning of the Polytetrafluoroethylene (Teflon) at High Feed
- Patru, Emil Nicusor
- Analysis of Turning Process of Pure Titanium Using Finite Element Method
- Patru, Emil Nicusor
- Analysis of Milling Process of Aluminum Alloy Using Finite Element Method
- Pauna, Ionut Alexandru
- Design and 3D Printing of a Mini Vacuum Table with FDM Technology
- Persu, Ioan Catalin
- Study of the Influence of Speed and Type of Roads on Vibrations Transmitted to an Electric Tractor Driver
- Petrescu, Stelian-Mihai-Sever
- Modeling and Simulation of an Orthodontic System of a Real Patient Starting from CBCT Images
- Pintoi, Ramona
- Concrete Pavers with Addition of Recycled Glass
- Popa, Dragos
- Stresses in Prosthetic Elbow Joint During Flexion-Extension Movement
- Popa, Dragos-Laurentiu
- A Personalized Three-Dimensional Model of a Patient Using CT Images
- Popa, Dragos-Laurentiu
- Modeling and Simulation of an Orthodontic System of a Real Patient Starting from CBCT Images
- Popa, Mădălin-Florin
- Aspects of Measuring Brake Parameters on Heavy Trucks Using a Roller Brake Stand
- Popescu, Daniel
- Microstructural Investigations of 3D Printed Reinforcing Network in Recycled Silicone Rubber Composites
- Popescu, Iulian
- Ellipse’s Versiera – Structure and Kinematics of the Generator Mechanism
- Popescu, Iulian
- Internal Turning of the Polytetrafluoroethylene (Teflon) at High Feed
- Popescu, Marian
- Microstructural Investigations of 3D Printed Reinforcing Network in Recycled Silicone Rubber Composites
- Popescu, Roxana Cristina
- Microstructural Investigations of 3D Printed Reinforcing Network in Recycled Silicone Rubber Composites
- Pãpãdie, Bogdan
- Study of the Influence of the Thermal Insulation System on the State of Stress, Deformation and Vibration of a Rehabilitated Building with a Structure of Reinforced Concrete Frames
- Racila, Laurentiu
- Experimental Stand to Investigate the Sealing Properties of Piston Rings Used in Automotive Industry
- Racila, Laurentiu Daniel
- Peer-Review Statements
- Rențea, Cristian
- Research Regarding of the Autonomy of the Electric Vehicles in WLTC Test Cycle
- Rențea, Cristian-Alexandru
- Study of CO₂ Emissions in Platoon Driving
- Rizescu, Sabin
- Structure-Related Non-uniformities in Composite Bars Made of Hybrid Dammar-Based Resin and Reinforced with Natural Fiber Fabrics
- Rizescu, Sabin
- Adding Some Remarks Concerning the Dzahanibekov Effect
- Romanescu, Alina
- Stresses in Prosthetic Elbow Joint During Flexion-Extension Movement
- Romanescu, Alina
- Concrete Pavers with Addition of Recycled Glass
- Rosca, Adrian Sorin
- Peer-Review Statements
- Rotaru, Razvan
- A Comparative Approach on Successive vs Simultaneous Drilling
- Rotea, Cristina
- Experimental Stand to Investigate the Sealing Properties of Piston Rings Used in Automotive Industry
- Roșca, Adrian Sorin
- Consideration on New Application for Rotary Engine
- Roșca, Doina
- Consideration on New Application for Rotary Engine