Proceedings of the 2017 International Conference on Manufacturing Engineering and Intelligent Materials (ICMEIM 2017)
428 authors
- Liu, Hong-qiang
- Review of Carbon Reduction Theory and Calculation Methods of Carbon Emissions in China 's Iron and Steel Industry
- Liu, Jian-fei
- Influence of Voltage on Electrolysis and Plasma Polishing
- Liu, Kai
- Study on Silk/Carbamate Films
- Liu, Li-chao
- Impact of a Square Liquid Body on a Rigid Plate
- Liu, Li-ying
- Study on Half Shaft Bushing Punching Slug Defect and Process Optimization
- Liu, Li-zhu
- Low Sintering Temperature and High Piezoelectric Properties of Tb-doped (Ba0.859 Ca0.141) (Zr0.106 Ti0.894) O3 Using CaCl2 as Sintering Aid
- Liu, Peng
- The Management System of Equipment Failuer Repair Service Based on HTML5 Standard
- Liu, Quan
- Preparation and Properties of Starch-g-PLA with High Grafting Degree Catalyzed by Hydrochloric Acid
- Liu, Rui-lin
- Influence of Upsetting Process on Continues Electric Heating by Coupled Electro-thermal-mechnical Simulation
- Liu, Shuang
- The Influence of the Carbon Dioxide-steam Alternate Ratio and the Permeability Difference Affect Oil Recovery of Steam Composite Flooding
- Liu, Si-yu
- Review of Carbon Reduction Theory and Calculation Methods of Carbon Emissions in China 's Iron and Steel Industry
- Liu, Xiao-dong
- Experimental Study of Flow Division in a Smooth Circular Culvert
- Liu, Xiao-qiu
- Fuzzy Cascade Control Research of Superheated Temperature
- Liu, Xiao-xing
- Fuzzy Multi-object Optimization Design of Helical Gear Drive
- Liu, Xiao-yan
- Seismic Response Analysis of Crossing Pipeline in High-intensity Region
- Liu, Xiong-feng
- Numerical Analysis of Annealing Process with Local Inductive Heating on A286 Alloy Tube
- Long, Wei-min
- Study of X-cor Sandwich's Compression Modulus Based on Homogenization Theory
- Lou, Miao
- The Influence of Curing Agent Content on the Property of Stainless Steel Flakes Epoxy Intermediate Nano-coating
- Lu, Hao-wei
- Low Sintering Temperature and High Piezoelectric Properties of Tb-doped (Ba0.859 Ca0.141) (Zr0.106 Ti0.894) O3 Using CaCl2 as Sintering Aid
- Lu, Shen-zhou
- Study on Silk/Carbamate Films
- Lu, Yu-feng
- The Influence of Curing Agent Content on the Property of Stainless Steel Flakes Epoxy Intermediate Nano-coating
- Luo, Xiao
- Computation Model Study on Hot Blast System and Raceway of Blast Furnace
- Luo, Ye-ke
- Experimental Investigation on Concealed Multi-ribbed Frame Thermal Insulation Wall under Eccentric Load
- Ma, Changlin
- An Improved Design of Pressure Relay Based on Mechanical Pressure Gauge
- Ma, Chuan-Guo
- The Properties of Epoxy Composites Containing Aligned Iron Oxide Nanorods by Low Magnetic Field
- Ma, Dou-Qin
- Microstructures and Properties of Sintered Cu-MoS2/Cu Functional Gradient Materials
- Ma, Dou-qin
- Optimization of SiCp Surface and Interface Structure of SiCp/A390 Composites
- Ma, Junchun
- An Improved Design of Pressure Relay Based on Mechanical Pressure Gauge
- Ma, Liang-liang
- The Experimental Study on Improving the Late Properties of Sulphoaluminate Cement Products
- Ma, Ya-xin
- Influence of Upsetting Process on Continues Electric Heating by Coupled Electro-thermal-mechnical Simulation
- Men, Zheng-xing
- Influence of Upsetting Process on Continues Electric Heating by Coupled Electro-thermal-mechnical Simulation
- Meng, Fan-nian
- Using the Point Cloud Data to Reconstructing CAD Model by 3D Geometric Modeling Method in Reverse Engineering
- Meng, Ze-ning
- Study on the Post Evaluation of the Chengshan Jiao Routeing system Based on Entropy Method
- Miao, Peng
- Phenolic Foam Based the Influence of Intumescent Flame Retardancy System Ammonium Polyphosphate/Pentaerythritol/Melamine
- Nie, Xiu-Yi
- Study on Low-velocity Impact Resistance of Aluminum Sandwich Honeycomb Panel
- Nie, Yao
- Design and Simulation Analysis of Modal and Harmonic Response of Chained Deep-ploughing Device
- Nieh, Chien-Chung
- Causality between Real Estate Market and Stock Market: Evidence from REIT Index in Taiwan
- Niu, Guo-Xu
- Study on Low-velocity Impact Resistance of Aluminum Sandwich Honeycomb Panel
- Niu, Li-bin
- A New Kind of Crude Magnesium Extraction Process and Device
- Ou, Hong-Kou
- Causality between Real Estate Market and Stock Market: Evidence from REIT Index in Taiwan
- Ou, Qi-Ju
- The Properties of Epoxy Composites Containing Aligned Iron Oxide Nanorods by Low Magnetic Field
- Pan, Qi-ying
- Fuzzy Multi-object Optimization Design of Helical Gear Drive
- Qian, Ai-lin
- Optimal Error Bound and A Semi-discrete Difference Scheme for the Cauchy Problem of the Modified Helmholtz Equation
- Qian, Kun-Ming
- Thermal Magnetic Behavior of Nanocrystalline Fe73.5Cu1Nb3Si13.5B9 Ribbons
- Qian, Xiao-liang
- Reanalysis of Classification Algorithms on Different Datasets
- Qiao, Jian-sheng
- Effects of Annealing on Magnetic Properties of Amorphous and Nano crystal line (Fe0.5Co0.5)73.5Cu1Nb3Si13.5B9 Wires
- Qin, Liang
- Fault Diagnosis of Aircraft Power Starting System Based on MTBF-SVM
- Qiu, Liu-chao
- Experimental Study of Flow Division in a Smooth Circular Culvert
- Quan, Jian-gang
- The Study on Legal Issues Concerning China's Tourism Environmental Protection
- Ran, Yi
- The Research and Analysis of the Influence of Nano-materials on the Performance of Cement Concrete
- Ren, Fu-shen
- Hydrodynamic Analysis and Modeling of Nozzle for Particle Jet Impact on Rock Broken
- Ren, Jian-xun
- A New Kind of Crude Magnesium Extraction Process and Device
- Rui, Z.Y.
- Research on Deformation Behaviors and Surface Quality Model at High-speed Cutting
- Shan, Wen-ju
- Parameter Setting for Dynamic Milling of Aluminum Alloy
- Shao, Fang-jie
- The Experimental Study on Improving the Late Properties of Sulphoaluminate Cement Products
- Shen, Chun-miao
- The Influence of Curing Agent Content on the Property of Stainless Steel Flakes Epoxy Intermediate Nano-coating
- Sheng, Li-na
- Adaptive Nonlinear Control for Linear Induction Motor Based on Q-Axis Current Compensation
- Shi, Jing-zhao
- Finite Element Analysis of the Loader Boom Based on ABAQUS
- Shi, Jing-zhao
- Design and Test with a Tomato Identification System based on Visual Technologies
- Shi, Shao-jie
- Study of X-cor Sandwich's Compression Modulus Based on Homogenization Theory
- Shi, Xian-Jun
- Fault Diagnosis of Aircraft Power Starting System Based on MTBF-SVM
- Song, Bin
- Study on Electroscope of UHV Equipment based on ZnS Material
- Song, Jin-chun
- Research on Electro-hydraulic Control System of the Special Section
- Su, Yuan
- A Study on Axial Bearings Lubrication Characteristics in High-speed Planetary Transmissions of Vehicles
- Su, Zheng-quan
- Study on the Effect of Chitosan Oligosaccharide in Relieving Constipation and Defecating Feces Excretion
- Sun, Li-juan
- Study on Lubrication Characteristics of Trapezoidal Groove for Planetary Gear Sliding Bearing
- Sun, Shi-li
- Impact of a Square Liquid Body on a Rigid Plate
- Sun, Shi-li
- Numerical Investigation of Collapsing Liquid Cylinder
- Sun, Zhao-hui
- The Water Stability Prediction Model of AC-25 Asphalt Mixture
- Tang, Ya-dong
- Finite Element Analysis of the Loader Boom Based on ABAQUS
- Tang, Ya-dong
- The Design and Finite Element Analysis of Emergency Escape Ladder for High-Rise Building
- Tang, Ya-dong
- Design and Test with a Tomato Identification System based on Visual Technologies
- Tang, Yue
- Influence of Upsetting Process on Continues Electric Heating by Coupled Electro-thermal-mechnical Simulation
- Teng, Zhen-chao
- Seismic Response Analysis of Crossing Pipeline in High-intensity Region
- Tian, Lin
- Study on the Killing Effect of Sodium Hypochlorite and Benzalkonium Bromide and the Compatibility of Them with the Scale and Corrosion Inhibitor
- Tian, Lin
- Study on the Application of Biocides in the Seawater Cooling System and Their killing Effect in the Laboratory
- Tian, Yan-zhi
- The Experimental Study on Improving the Late Properties of Sulphoaluminate Cement Products
- Tong, Hong-liang
- Synthesis and Characterization of Cross-linked Polysiloxane Microspheres for Light-scattering
- Wan, Hua-Mei
- The Properties of Epoxy Composites Containing Aligned Iron Oxide Nanorods by Low Magnetic Field
- Wan, Ren-yi
- Numerical Simulation for Crushing of Shell Material about 50SiMnVB Influenced by Brittle Zone
- Wang, Ai-Qin
- Microstructures and Properties of Sintered Cu-MoS2/Cu Functional Gradient Materials
- Wang, Ai-qin
- Optimization of SiCp Surface and Interface Structure of SiCp/A390 Composites
- Wang, Cheng-lin
- Effects of Annealing on Magnetic Properties of Amorphous and Nano crystal line (Fe0.5Co0.5)73.5Cu1Nb3Si13.5B9 Wires
- Wang, Gang
- Adaptive Nonlinear Control for Linear Induction Motor Based on Q-Axis Current Compensation
- Wang, Hong-li
- Study on Prediction of Rotary-Impact Drilling Speed of Rock Drill
- Wang, Hong-wei
- Study on Lubrication Characteristics of Trapezoidal Groove for Planetary Gear Sliding Bearing
- Wang, Hong-wei
- A Study on Axial Bearings Lubrication Characteristics in High-speed Planetary Transmissions of Vehicles
- Wang, Hong-zhen
- The Experimental Study on Improving the Late Properties of Sulphoaluminate Cement Products
- Wang, Ji
- Influence of Voltage on Electrolysis and Plasma Polishing
- Wang, Jin-guo
- The Design of Informatization of Urology Education
- Wang, Jin-guo
- The Implementation of Information Technology in the Clinical Practice Lesson
- Wang, Lei
- Effect of Y2O3Doping on the Structure and Piezoelectric Properties of BCZT Ceramics
- Wang, Li
- Parametric Design and Motion Analysis of Geneva Wheel Mechanism Based on the UG NX8.5
- Wang, Li-nong
- Study on Electroscope of UHV Equipment based on ZnS Material
- Wang, Luo-jie
- Facile Preparation of Few-layer MoS2-NS by Liquid-Phase Ultrasonic Exfoliation
- Wang, Na
- The Design of Informatization of Urology Education
- Wang, Na
- The Implementation of Information Technology in the Clinical Practice Lesson
- Wang, Peng
- The Influence of Surface Opening Crack on the Ultrasonic Waves Near the Surface in Concrete Members
- Wang, Qingsheng
- Power Flow Analysis Of Nonlinear Finite Difference Model Of Bionic Acoustic Sensing Device
- Wang, Shiu-Ping
- The 3D Arm Modeling and Position Control