Proceedings of the 2015 International Conference on Electrical, Electronics and Mechatronics
147 authors
- Afandi, Hamzah
- Analog Control (Front-End) Design of RFID Tag in 0.35 μm CMOS Technology
- Afandi, Hamzah
- Design Analog Buffering on The multiplexer in RFID sensor tag with CMOS Technology 0.35 μm
- Afandi, Hamzah
- Design Analog Layout Using Schematic-Driven EDA Tools
- Ai, Chunan
- Study on Guided Wave Imaging Methods for SOLID Rocket Motor Shell Material
- Bai, Jingjie
- Research on the Relationship between Wind Power Correlation and Volatility
- Barakhtanov, Lev
- Research of the Friction Clutch Automatic Control Performance at the Stand
- Bhadradiya, Vaishalee
- Measurement of Room Impulse Response Using Image Source Method
- Blokhin, Aleksandr
- Research of the Friction Clutch Automatic Control Performance at the Stand
- Blokhin, Aleksandr
- The Automatic Control System of the Multistage Manual Transmission
- Cai, Xiaofeng
- Study on Guided Wave Imaging Methods for SOLID Rocket Motor Shell Material
- Cai, Xiaofeng
- Study on Detection of SRM Composite Structure Using Ultrasonic Fixed Distance Transmission Method
- Chen, Jie
- Wireless Transmission Based on GPRS Used in Cable On-line Monitoring System
- Chen, Lixian
- Security System for the Telecommunication Room Based on the RFID and Video Analysis
- Chen, Ying
- PID Controller Parameter Tuning Based on Improved Particle Swarm Optimization Algorithm
- Cheng, Lu
- Study on How to Achieve 2030 Carbon Emission Peak in Power Sector
- Choithrani, Renu
- Applications of Titanates in Electronics Technology
- Dai, Junfeng
- Security System for the Telecommunication Room Based on the RFID and Video Analysis
- Darwis
- Analog Control (Front-End) Design of RFID Tag in 0.35 μm CMOS Technology
- Dong, Haoming
- Application of Virtual Reality Technology in the Training of Crane Operators
- Du, Chunzhi
- Experimental Study on the Bending Properties of Functionally Graded Shape Memory Alloy Laminate
- Gao, Huanbing
- Video Surveillance System for Extra-high Voltage Power Transmission Lines with an Optimal Image Compression Method
- Gao, Ruyi
- Study on the Performance Testing and Optimizing the Use of Lithium Iron Phosphate Battery
- Gao, Wencan
- Study on the Performance Testing and Optimizing the Use of Lithium Iron Phosphate Battery
- Geng, Chao
- The Dynamic Characteristics of the Controllable Floating Raft System
- Gu, Xiang
- The Finite Element Analysis for Fork Based on ANSYS
- Gu, Xing
- The Finite Element Analysis for Fork Based on ANSYS
- Guo, Miaoxian
- Active Piezoelectric Vibration Isolation System of Machine Tools
- Harahap, Robby Kurniawan
- Synthesized Design Layout Base CMOS Technology 0.35μm
- Harahap, Robby Kurniawan
- Design Analog Layout Using Schematic-Driven EDA Tools
- He, Yujing
- The Design of Speed Reducer of Yam Harvester Ditching Chain
- Heruseto, Brahmantyo
- Design Analog Layout Using Schematic-Driven EDA Tools
- Hong, Shan
- Transmission Line Traveling Wave Fault Location Based on Empirical Mode Decomposition De-noising
- Huang, Jing
- The Visualization Technology of Sub-compartment Management Procedures Based on WF Technology
- Jia, Hujun
- Improved Clival Gate 4H-SiC MESFET with Recessed Drain Drift Region and Recessed P-Buffer Layer
- Jia, Jianhao
- Effect of Injection Timing on Performance and Emissions of DI-diesel Engine Fueled with Isopropanol
- Jiang, Yueqiang
- Prediction of Explosion Heat of Aluminized Explosive Based on Artificial Neural Network
- Jiao, Yaoyao
- Continuous Target Tracking Algorithm in Aerial Wireless Sensor Network
- Jin, Huijie
- PID Controller Parameter Tuning Based on Improved Particle Swarm Optimization Algorithm
- Kim, Nammoon
- A Novel RSS-Ratio Position Estimation Scheme for Wi-Fi Networks
- Kim, Youngok
- A Novel RSS-Ratio Position Estimation Scheme for Wi-Fi Networks
- Koshurina, Alla
- Research of the Friction Clutch Automatic Control Performance at the Stand
- LI, Mingyang
- A Combination Predicting Method Based on Innovation GM(1,1) and RBF
- Lamsani, Missa
- Design 8 Bit Analog Unit ADC Integrating Type Single Slope For Low Frequency Application
- Li, Beizhi
- Active Piezoelectric Vibration Isolation System of Machine Tools
- Li, Bin
- Epoxy Casting Process and Complete Set Test for New 10 kV High Voltage Electric Energy Meter Based on All-fiber Optical Current Transformer
- Li, Bin
- Research on Application of New 10kV High Voltage Electric Energy Meter Based on All-fiber Optical Current Transformer
- Li, He
- The Design of the Peanut Sheller Transmission Device
- Li, Jian
- Study on Guided Wave Imaging Methods for SOLID Rocket Motor Shell Material
- Li, Jian
- Study on Detection of SRM Composite Structure Using Ultrasonic Fixed Distance Transmission Method
- Li, Jianjun
- The Visualization Technology of Sub-compartment Management Procedures Based on WF Technology
- Li, Qian
- Influence of Grounding Material’s Property on the Impulse Grounding Resistance of Grounding Grids
- Li, Wei
- Active Piezoelectric Vibration Isolation System of Machine Tools
- Li, Yan
- Simulation and Fabrication of Compounded CMUTs for Medical Application
- Li, Yongliang
- The Visualization Technology of Sub-compartment Management Procedures Based on WF Technology
- Liang, Steven Y.
- Active Piezoelectric Vibration Isolation System of Machine Tools
- Liao, Junbi
- Study on the Performance Testing and Optimizing the Use of Lithium Iron Phosphate Battery
- Lin, Ning
- The Finite Element Analysis for Fork Based on ANSYS
- Liu, Bingfei
- Experimental Study on the Bending Properties of Functionally Graded Shape Memory Alloy Laminate
- Liu, Huanjun
- Research on the Methods to Reading Pointer Instrument Based on Machine Vision
- Liu, Kaixuan
- Study on Guided Wave Imaging Methods for SOLID Rocket Motor Shell Material
- Liu, Qi
- Research on the Relationship between Wind Power Correlation and Volatility
- Liu, Xiaodong
- Transmission Line Traveling Wave Fault Location Based on Empirical Mode Decomposition De-noising
- Liu, Xinguo
- Study on Detection of SRM Composite Structure Using Ultrasonic Fixed Distance Transmission Method
- Liu, Yang
- PID Controller Parameter Tuning Based on Improved Particle Swarm Optimization Algorithm
- Liu, Yibin
- Effect of Injection Timing on Performance and Emissions of DI-diesel Engine Fueled with Isopropanol
- Liu, Yonggang
- Prediction of Explosion Heat of Aluminized Explosive Based on Artificial Neural Network
- Lubichev, Pavel
- Research of the Friction Clutch Automatic Control Performance at the Stand
- Luo, Gongyin
- Security System for the Telecommunication Room Based on the RFID and Video Analysis
- Luo, Xingxing
- Security System for the Telecommunication Room Based on the RFID and Video Analysis
- Luo, Yehui
- Improved Clival Gate 4H-SiC MESFET with Recessed Drain Drift Region and Recessed P-Buffer Layer
- Ma, Peimiao
- Improved Clival Gate 4H-SiC MESFET with Recessed Drain Drift Region and Recessed P-Buffer Layer
- Ma, Zhihao
- Effect of Injection Timing on Performance and Emissions of DI-diesel Engine Fueled with Isopropanol
- Mehta, Prarthan
- Measurement of Room Impulse Response Using Image Source Method
- Miao, Yanzi
- PID Controller Parameter Tuning Based on Improved Particle Swarm Optimization Algorithm
- Mukhlis, Yulisdin
- Design 8 Bit Analog Unit ADC Integrating Type Single Slope For Low Frequency Application
- Musa, P.
- Analog Control (Front-End) Design of RFID Tag in 0.35 μm CMOS Technology
- Nur’ainingsih, Dyah
- Design Analog Buffering on The multiplexer in RFID sensor tag with CMOS Technology 0.35 μm
- Prasetyo, Eri
- Design Analog Layout Using Schematic-Driven EDA Tools
- Purnomo, Joko
- Analog Control (Front-End) Design of RFID Tag in 0.35 μm CMOS Technology
- Putra, Hendri Dwi
- Synthesized Design Layout Base CMOS Technology 0.35μm
- Ren, Yuan
- The Design of Speed Reducer of Yam Harvester Ditching Chain
- Ren, Yuan
- The Design of the Peanut Sheller Transmission Device
- Shang, Weiwei
- Effect of Injection Timing on Performance and Emissions of DI-diesel Engine Fueled with Isopropanol
- Shi, Yintao
- Rapid Reconstruction of Tree Skeleton Based on Voxel Space
- Soerowirdjo, Busono
- Design Analog Buffering on The multiplexer in RFID sensor tag with CMOS Technology 0.35 μm
- Song, Kang
- Study on the Performance Testing and Optimizing the Use of Lithium Iron Phosphate Battery
- Song, Mingshu
- Research on the Relationship between Wind Power Correlation and Volatility
- Su, Weijun
- Continuous Target Tracking Algorithm in Aerial Wireless Sensor Network
- Sun, Yunlong
- Wireless Transmission Based on GPRS Used in Cable On-line Monitoring System
- Tan, Li
- Continuous Target Tracking Algorithm in Aerial Wireless Sensor Network
- Tang, Jie
- The Dynamic Characteristics of the Controllable Floating Raft System
- Taratorkin, Aleksandr
- Research of the Friction Clutch Automatic Control Performance at the Stand
- Tian, Peng
- Study on the Performance Testing and Optimizing the Use of Lithium Iron Phosphate Battery
- Tian, Xin
- Prediction of Explosion Heat of Aluminized Explosive Based on Artificial Neural Network
- Wang, Baohua
- Transmission Line Traveling Wave Fault Location Based on Empirical Mode Decomposition De-noising
- Wang, Hui
- The Dynamic Characteristics of the Controllable Floating Raft System
- Wang, Jianwei
- A Combination Predicting Method Based on Innovation GM(1,1) and RBF
- Wang, Lian yue
- Research on Construction Lean SCM in IOT Environment
- Wang, Maomei
- Rapid Reconstruction of Tree Skeleton Based on Voxel Space
- Wang, Weijun
- The Finite Element Analysis for Fork Based on ANSYS