Proceedings of the 3rd Annual International Conference on Advanced Material Engineering (AME 2017)
283 authors
- An, Cheng-Gang
- Microstructure and Property Investigation of X65MO-316L Hot Rolled Clad Coil Applied for Offshore Line Pipe
- An, Xi-Zhong
- Double-action Die Compaction of Fe-Al Composite Powder- A Study by MPFEM Simulation
- An, Xi-Zhong
- Two-Step Fabrication of Porous α-Fe2O3@δTiO2 core-shell Nanostructures with Enhanced Photocatalytic Activity
- An, Xi-Zhong
- Two-Step Synthesis of V2O5 Nanosheets with High Sensing Properties toward Acetone
- Ananchenko, D.V.
- Luminescent and Dosimetric Properties of Ultrafine Alumina Ceramics with Anion Defects
- Bai, Li-Yun
- Electric field-induced Nonlinear I-V Characteristic in a AgNWs/PVA Film Composite
- Bai, Zong-Qi
- A New Preparation Process of Double-gate FETs Based on Monolayer Graphene Nanoflakes
- Bi, Yong-Guang
- Experimental Research on Single Factor Ultrasonic Assisted Extraction of Polysaccharides from Gracilaria lemaneiformis
- Chang, Meng-Lei
- Design and Optimization of a New Composite Thermal Insulating Fluorocarbon Coating
- Chen, Bei
- Preparation of PMMA/PGMA Blend to Apply for Metallographic Cross Section of Printed Circuit Board
- Chen, Chong
- Morphology Study and Planning of the Active Distribution Network in the Energy Internet
- Chen, Dong-Chu
- Design and Optimization of a New Composite Thermal Insulating Fluorocarbon Coating
- Chen, Fang-Yuan
- Design on the Absorbing Composites Using the Frequency-Advantage to Layer-stacked Rule
- Chen, Hui
- Preparation of Ultrafine Ti(C,N) Based Cermet Constructed by β-Co and Research on Its Toughening Mechanism
- Chen, Kui
- Experiment Study on High-efficiency Rock-breaking Mechanism of TBM with A Varying Number of Disc Cutters
- Chen, Wei
- Preparation of Vanadium Dioxide Thin Films with Adjustable Electric Field Intensity Transition Point
- Chen, Xue-Wei
- Experimental Research on Single Factor Ultrasonic Assisted Extraction of Polysaccharides from Gracilaria lemaneiformis
- Chen, Yi-Shun
- Experimental Analysis on FRP Strengthened Autoclaved Aerated Concrete Panels
- Chen, Yuan-Ming
- Preparation of PMMA/PGMA Blend to Apply for Metallographic Cross Section of Printed Circuit Board
- Cheng, Wei
- Electric field-induced Nonlinear I-V Characteristic in a AgNWs/PVA Film Composite
- Citek, David
- Experimental Investigation on Material Properties of Ultra - High Performance Fiber Reinforced Concrete in Extreme Conditions
- Cui, Can
- Reduced Graphene Oxide Modified TiO2 Nanoparticles Composites for Improved Performance of Dye-sensitized Solar Cells
- Cui, Kai-Yu
- Investigation of Cold Forming Cracking Defect of High-Strength Vehicle Structural Steel
- Dai, Hui-Ju
- The (G'/G)-Expansion Method for the Sine-Gordon Equation, Sinh-Gordon Equation and Liouville Equaiton
- Dai, Xiao-Li
- Microstructure and Property Investigation of X65MO-316L Hot Rolled Clad Coil Applied for Offshore Line Pipe
- Deng, Ling-zhi
- Dynamic Assessment of Water resources Security in Karst Area Based on PESBR Model
- Deng, Shi-Ting
- Experimental Research on Single Factor Ultrasonic Assisted Extraction of Polysaccharides from Gracilaria lemaneiformis
- Deng, Yang-Chao
- The Influence of Sheath Solvent Compositions on the Diameters of Electrospun PCL/PTMC Nanofibers
- Deng, Ying
- Preparation of Ultrafine Ti(C,N) Based Cermet Constructed by β-Co and Research on Its Toughening Mechanism
- Di, Jian
- The Influence of Space Charge on the Insulation Failure of DC Cable and Its Mechanism Study
- Dong, Wei
- Design and Analysis of a Soft Actuator for a Three-legged Soft Robot
- Dong, Zhen-Xing
- The Stability Analysis of Underground Pumping Stations in Complicated Geological Rock Mass
- Du, Zhi-Jiang
- Design and Analysis of a Soft Actuator for a Three-legged Soft Robot
- Fei, Wan-Tang
- Rapid Non-Destructive Testing Technique of Rockfill Dam Compactness Based on Surface Wave Method
- Feng, Ming-Fu
- 3D Simulation of the Closed Shell-Electrode Detector
- Feng, Tao
- Nanostructure and Magnetic Properties of Fezr/Cuzr Amorphous Multilayers
- Feng, Tao
- Micro-Scale Compression of Ni-based Metallic Glass
- Fort, Jan
- Experimental Investigation on Material Properties of Ultra - High Performance Fiber Reinforced Concrete in Extreme Conditions
- Fu, Hai-Tao
- Two-Step Fabrication of Porous α-Fe2O3@δTiO2 core-shell Nanostructures with Enhanced Photocatalytic Activity
- Fu, Hai-Tao
- Two-Step Synthesis of V2O5 Nanosheets with High Sensing Properties toward Acetone
- Fu, Jin-Wei
- Experiment Study on High-efficiency Rock-breaking Mechanism of TBM with A Varying Number of Disc Cutters
- Gao, Jin-Gui
- Different Working Parameters of Biomass Processing with the Band Saw out, the Impact of Vibration Frequency and the Rate of Tooth
- Ge, Jun
- Utilization of Air Quenched Steel Slag in Decorative Ceramics with Higher Mechanical Properties
- Gong, Li-Jun
- Preparation of PMMA/PGMA Blend to Apply for Metallographic Cross Section of Printed Circuit Board
- Guan, Zhi-Dong
- Buckling Mode Transition in Composite Panels under Different Stiffening Conditions
- Guo, Chun-Yu
- Micro-Scale Compression of Ni-based Metallic Glass
- Guo, Tong-Tong
- The Constructure Alteration Simulation of A Type of Self-growth Material of Whistar Rat
- Guo, Tong-Tong
- The Effect of Material Mechanics on Artificial Cartilage Defects Repaired in Tissue Engineering
- Han, Li
- Influence of Stack Orientations on the Static Strengths of SPR Joints
- He, Wei
- Preparation of PMMA/PGMA Blend to Apply for Metallographic Cross Section of Printed Circuit Board
- He, Xue-Mei
- Preparation of PMMA/PGMA Blend to Apply for Metallographic Cross Section of Printed Circuit Board
- He, Ying-Fa
- Research on Variation of Reactive Power Capacity under DC Bias of Transformers
- Hou, Yan-Hui
- First-principles Study on the Properties of GPBII(Al2CuMg)(001)and S(Al2CuMg)(001) Surfaces
- Hou, Yan-Hui
- The Phase Field Method to Simulate the Evolution of Two Phase
- Hou, Yan-Hui
- First-Principles Study of Elastic and Surfaces Properties of Ω(Al2Cu) Phase
- Hou, Yan-Hui
- Phase-field Simulation of Effect of the Second-phase Particles with Different Geometric Orientations on Grain Evolution
- Hu, Ying-Cheng
- Preparation and Bending Properties of Lattice Sandwich Structure for Wooden Truss
- Huang, Hai-Lan
- Experimental Research on Single Factor Ultrasonic Assisted Extraction of Polysaccharides from Gracilaria lemaneiformis
- Huang, Jiang
- Effect of Hole Transport Layers on the Performance of Organic Optoelectronic Devices based on PBDB-T:ITIC Bulk Heterojunction
- Huang, Xiao-Yan
- Design and Optimization of a New Composite Thermal Insulating Fluorocarbon Coating
- Jiang, Mei-Rong
- Experimental Analysis on FRP Strengthened Autoclaved Aerated Concrete Panels
- Jiang, Si-Yuan
- Buckling Mode Transition in Composite Panels under Different Stiffening Conditions
- Jiang, Zhao-Fang
- Different Working Parameters of Biomass Processing with the Band Saw out, the Impact of Vibration Frequency and the Rate of Tooth
- Jiang, Zhong-Tao
- Preparation of Ultrafine Ti(C,N) Based Cermet Constructed by β-Co and Research on Its Toughening Mechanism
- Jing, Xiao-Long
- Preparation of Ultrafine Ti(C,N) Based Cermet Constructed by β-Co and Research on Its Toughening Mechanism
- Kolisko, Jiri
- Experimental Investigation on Material Properties of Ultra - High Performance Fiber Reinforced Concrete in Extreme Conditions
- Kondo, Ryota
- Effect of Tiny Pd Addition to Ti for Their Hydrogenation Properties
- Konev, S.F.
- Luminescent and Dosimetric Properties of Ultrafine Alumina Ceramics with Anion Defects
- Kong, Xin-Li
- Experimental Analysis on FRP Strengthened Autoclaved Aerated Concrete Panels
- Kortov, V.S.
- Luminescent and Dosimetric Properties of Ultrafine Alumina Ceramics with Anion Defects
- Li, Ang
- Preparation of Vanadium Dioxide Thin Films with Adjustable Electric Field Intensity Transition Point
- Li, Bin
- Rapid Non-Destructive Testing Technique of Rockfill Dam Compactness Based on Surface Wave Method
- Li, Bo-Si
- First-principles Study on the Properties of GPBII(Al2CuMg)(001)and S(Al2CuMg)(001) Surfaces
- Li, Bo-Si
- The Phase Field Method to Simulate the Evolution of Two Phase
- Li, Bo-Si
- First-Principles Study of Elastic and Surfaces Properties of Ω(Al2Cu) Phase
- Li, Bo-Si
- Phase-field Simulation of Effect of the Second-phase Particles with Different Geometric Orientations on Grain Evolution
- Li, Chen
- The Influence of Sheath Solvent Compositions on the Diameters of Electrospun PCL/PTMC Nanofibers
- Li, Chun
- A Simulation Study on the Temperature Response of W/Cu Divertor Monoblocks under High Heat Fluxes
- Li, Dezhi
- Influence of Stack Orientations on the Static Strengths of SPR Joints
- Li, Fang
- Desalination Performance of Graphene Oxide-PEG Nanohybrid Membranes
- Li, Jun-Wei
- Double-action Die Compaction of Fe-Al Composite Powder- A Study by MPFEM Simulation
- Li, Lian-Zhong
- Oscillation Criteria for a Class of Certain Half-linear Emden-Fowler Functional Differential Equations of Neutral Type
- Li, Lian-Zhong
- The (G'/G)-Expansion Method for the Sine-Gordon Equation, Sinh-Gordon Equation and Liouville Equaiton
- Li, Liao-Sha
- Utilization of Air Quenched Steel Slag in Decorative Ceramics with Higher Mechanical Properties
- Li, Meng-Qiang
- Self-healing Epoxy with Epoxy-amine Dual-capsule Healing System
- Li, Ming-Yue
- Preparation and Luminescence Properties of Eu3+ doped Transparent Glass Ceramics Containing CaMoO4 crystals
- Li, Wu-Fa
- Two-Step Fabrication of Porous α-Fe2O3@δTiO2 core-shell Nanostructures with Enhanced Photocatalytic Activity
- Li, Xing
- Experiment Study on High-efficiency Rock-breaking Mechanism of TBM with A Varying Number of Disc Cutters
- Li, Ying-Chun
- Preparation and Tribological Performance Testing of Bonded Solid Lubricating Coatings Used on Spherical Plain Bearings
- Li, Zeng-Shan
- Buckling Mode Transition in Composite Panels under Different Stiffening Conditions
- Li, Zheng
- Development of Ultra-fast 3D Silicon Detectors: 3D Simulation and Modeling of 3D-trench Electrode Detector
- Li, Zheng
- 3D Simulation of the Closed Shell-Electrode Detector
- Li, Zheng-Rong
- Investigation of Cold Forming Cracking Defect of High-Strength Vehicle Structural Steel
- Li, Zhi
- First-principles Calculations of Structures and Micro-cracks of the Al-Ni Crystal Materials
- Li, Zhuo
- Morphology Study and Planning of the Active Distribution Network in the Energy Internet
- Lin, Wei
- Effect of Slag Composition on Non-metallic Inclusions for Gear Steel During LF Process
- Lin, Zhen-Rong
- Application of Nanometer Materials in Protein Separation
- Liu, Bin
- Study on Tribological Property of PMMA Denture Base Materials with Negative Ion Powder
- Liu, Bing
- Preparation of Ultrafine Ti(C,N) Based Cermet Constructed by β-Co and Research on Its Toughening Mechanism
- Liu, Chang
- Research on Variation of Reactive Power Capacity under DC Bias of Transformers