Proceedings of the International Conference "Actual Issues of Mechanical Engineering" (AIME 2018)
369 authors
- Gilmanov, A.Ya.
- Optimal Distance Between Wells In SAGD Based On Material Balance Method
- Gitman, M
- Synchronization and management of material flows in small-scale production
- Gitman, Mikhail
- Influence of microdamage structure on fatigue resistance of metal functional material
- Glotova, Irina
- Automatic control system for ion-exchange sorption in industrial production of amino acids as bioprotective factors
- Glotova, Irina
- Investigation of polymer interaction with nanoscale modifier and development of its identification algorithm
- Golubyatnikov, О.О.
- Optimizing cycles of adsorption separation of gas mixtures
- Goryachev, Vladimir
- Optimizing the Positioning of Power Sources in Industrial Units Electrical Power Systems on the Basis of the Method of Distributed Power Density
- Grechukhin, Aleksandr Nikolaevich
- Development of information-analytical system for technological requests monitoring, taking into account regional specifics
- Greshkina, E.V.
- Effect of Transverse Compression on Web-crushing Strength of Reinforced Concrete I-shaped Beams
- Grezina, Olga Anatolyevna
- Downhole device design and results of its utilization under acid-implosion action
- Grinchar, N.G.
- Comprehensive mobile crane control and safety system
- Grishko, Aleksey
- Optimizing the Positioning of Power Sources in Industrial Units Electrical Power Systems on the Basis of the Method of Distributed Power Density
- Gryazev, Mikhail Vasikievich
- Theoretical investigation of force acting during flanging of anisotropic sheet materials
- Gudkov, Maksim
- Investigation of polymer interaction with nanoscale modifier and development of its identification algorithm
- Igtisamova, Galia Rashitovna
- Peculiarities of problem solving at studying well drilling with the use of linear differential equations with constant coefficients
- Ishkov, Alexey
- Subminiature eddy current transducers for studying aluminium-dielectric and steel-dielectric junctions
- Ivanov, Vladlen
- Single-phase AC rectifier with high power factor
- Ivanov, Vladlen
- Structural synthesis as method of zone-phase controller modernization
- Ivanova, Oksana
- Numerical Simulation of Inert Solid-Phase Three- Component Mixtures Subjected to Explosive Compaction
- Ivashin, Sergey
- Method of workpiece group’s creation and selection of parts representatives in digital manufacturing
- Kadyrov, Ramzis Rakhimovich
- Technologies and technical devices for annual regulated flooding of a productive strata
- Kadyrov, Zh. N.
- Structural and mechanical properties of asphalt mixtures - basis for rationing of their technological properties
- Kalienko, Ekaterina Aleksandrovna
- Production line intended for implementation of innovative technologies of cleaning and fractionation of raw coriander
- Kamenskikh, Anna
- Comparative analysis of antifriсtion polymers behaviour under deformation of spherical bearing
- Kapustin, Andrei
- Single-phase AC rectifier with high power factor
- Kapustin, Andrei
- Structural synthesis as method of zone-phase controller modernization
- Karandey, V.Yu.
- Research of electrical power processes for optimum modeling and design of special electric drives
- Karimov, Oleg Khasanovich
- Research of overall performance of polymeric sprinkler of coolers
- Kashin, Yakov Mikhailovich
- Heat emission coefficients of a combined oil separator
- Kashin, Yakov Mikhailovich
- Promising converters of wind and solar energy into electric energy for electrotechnical complexes
- Katasonov, Alexander
- Subminiature eddy current transducers for studying aluminium-dielectric and steel-dielectric junctions
- Khabibullin, M. Ya.
- Laboratory studies for the momentum of liquid optimal impact on hydrocarbon formation
- Khabibullin, M. Ya.
- Express method of injection well treatment
- Khabibullin, Marat Yakhievich
- Impulse non-stationary flooding of hydrocarbon deposits
- Khabibullin, Marat Yakhievich
- Choice of bottom-hole filter construction fluid filtration
- Khabibullin, Marat Yakhievich
- Determining oscillating system dynamic parameters of a near-bit junk pulper
- Khristoforov, Mikhail Sergeyevich
- Promising converters of wind and solar energy into electric energy for electrotechnical complexes
- Kim, Vladislav Anatolievich
- Heat emission coefficients of a combined oil separator
- Kim, Vladislav Anatolievich
- Promising converters of wind and solar energy into electric energy for electrotechnical complexes
- Kislenko, T.A.
- Mathematical model of dust collection process in apparatus with counter-swirling flows in aspiration systems
- Kizurov, Anatoly Sergeevich
- Intensification of drying process of wheat seeds based on differentiation of thermal energy supply
- Kizurov, Anatoly Sergeevich
- Theoretical studies of equilibrium of disc coulter counter with adaptive suspension
- Klestov, R.
- About some approaches to problem of metals and alloys microstructures classification based on neural network technologies
- Klyuev, A.
- About some approaches to problem of metals and alloys microstructures classification based on neural network technologies
- Klyukin, V.Yu.
- DISTRIBUTION OF PRESSURE OF GAS UNDER ACTION OF CENTRIFUGAL FORCES
- Kochegarov, Igor
- Optimizing the Positioning of Power Sources in Industrial Units Electrical Power Systems on the Basis of the Method of Distributed Power Density
- Kochetkov, A. V.
- Structural and mechanical properties of asphalt mixtures - basis for rationing of their technological properties
- Kochnev, V.I.
- Structural and mechanical properties of asphalt mixtures - basis for rationing of their technological properties
- Kokoshin, Sergei Nikolaevich
- Intensification of drying process of wheat seeds based on differentiation of thermal energy supply
- Kokoshin, Sergei Nikolaevich
- Theoretical studies of equilibrium of disc coulter counter with adaptive suspension
- Kolesnikov, Igor Vladimirovich
- Calculated model of wedge-shaped sliding supports in turbulent friction regime
- Kondrasheva, M R
- Compute methods for assessment of gas distribution networks
- Kopelevich, Lev Efimovich
- Heat emission coefficients of a combined oil separator
- Kopelevich, Lev Efimovich
- PROMISING ELECTROMECHANICAL AXIAL CONVERTERS
- Kotin, Denis A.
- Automation Control System against Driver Falling Asleep in Traffic
- Kotlyarskiy, E.V.
- Structural and mechanical properties of asphalt mixtures - basis for rationing of their technological properties
- Kozlov, V.N.
- Development of complex of mathematical models at production stages of multilayer structures of spherical shape by polymerization method
- Kravtsov, Vladimir Pavlovich
- Simulation system for optimizing technical and organizational variants in coalmining production
- Kremleva, L.V.
- Dependence of surface roughness on technological conditions of ultrasonic smoothing
- Kremleva, L.V.
- Influence of end woodcutters design on the vibration level and surface roughness
- Krokhmal, V.V.
- DISTRIBUTION OF PRESSURE OF GAS UNDER ACTION OF CENTRIFUGAL FORCES
- Kucher, Ekaterina S.
- Synthesis of Full Order Observer for Vector Control System of Induction Motor Drive
- Kudelina, Daria Vasilevna
- Development of information-analytical system for technological requests monitoring, taking into account regional specifics
- Kukartsev, Viktor Alekseevich
- State and trends of depreciation strategy of rocket and space industry enterprises formation
- Kukartsev, Vladislav Viktorovich
- State and trends of depreciation strategy of rocket and space industry enterprises formation
- Kulakov, Leonid Sergeevich
- Kinematic analysis of robotic complex within the SOLIDWORKS Motion system
- Kulbyakina, A. V.
- System Analysis of Energy Efficiency at Oil and Gas Industry Enterprises
- Kuleshova, Lubov Sergeevna
- Technologies and technical devices for annual regulated flooding of a productive strata
- Kulikov, Kirill I.
- Determination of Electrochemical Generator Power in Combined Transport Power Plant
- Kushev, L A
- Compute methods for assessment of gas distribution networks
- Kutin, Andrey
- Method of workpiece group’s creation and selection of parts representatives in digital manufacturing
- Kuts, Lyubov E.
- Forming C/Cu Composite on Surface of Structural Chrome-Nickel Steel by Ion Beam Deposition
- Kuznetsov, Dmitry
- Ultrasound Method of Li-ion Electric Battery Monitoring
- Kuznetsov, Igor Sergeevich
- Simulation system for optimizing technical and organizational variants in coalmining production
- Kuznetsov, S.M.
- Features of Settings Regulation of Protection DC Traction Networks
- Lagunova, Elena Olegovna
- Calculated model of wedge-shaped sliding supports in turbulent friction regime
- Langeman, Evelina
- Structural synthesis as method of zone-phase controller modernization
- Langeman, Evelina G.
- Determination of Electrochemical Generator Power in Combined Transport Power Plant
- Larin, Sergey Nikolaevich
- Theoretical investigation of force acting during flanging of anisotropic sheet materials
- Larin, Sergey Nikolaevich
- Analysis of workpiece geometry change during isothermal free deformation of titanium alloys in square die
- Lisitsyn, Pavel
- Single-phase AC rectifier with high power factor
- Lobacheva, Natalia
- Automatic control system for ion-exchange sorption in industrial production of amino acids as bioprotective factors
- Lobacheva, Natalia
- Investigation of polymer interaction with nanoscale modifier and development of its identification algorithm
- Lobanov, N.V.
- Dependence of surface roughness on technological conditions of ultrasonic smoothing
- Lunin, L.S.
- INFLUENCE OF ELASTIC STRAINS ON ZONE ENERGY DIAGRAM OF In1 – xGaxAs/GaAs HETEROSTRUCTURE
- Luzhansky, D.A.
- Influence of end woodcutters design on the vibration level and surface roughness
- Lyapota, Taras L.
- Use of finite-element simulation of primary deformations within walls of discharge tunnel to present anthropogenic disasters
- Lysenko, Alexey
- Optimizing the Positioning of Power Sources in Industrial Units Electrical Power Systems on the Basis of the Method of Distributed Power Density
- Lyubomudrov, S.A.
- Method of temperature measurement in cutting zone while turning using portable class thermal imaging system
- Malikov, Vladimir
- Subminiature eddy current transducers for studying aluminium-dielectric and steel-dielectric junctions
- Malozyomov, B.V.
- Features of Settings Regulation of Protection DC Traction Networks
- Malozyomov, B.V.
- Determination of Diagnostic Parameters and Reliability Parameters of Electrical Systems
- Malozyomov, B.V.
- A Posteriori Analysis of the Socio-Economic Potential of Rural Areas
- Malozyomov, B.V.
- Innovative Protection Systems for Electric Traction Networks
- Malozyomov, B.V.
- Digital protection systems in DC networks
- Malozyomov, B.V.
- Innovative State Support for Economy of Rural Areas as Urban Satellites
- Malozyomov, B.V.
- Defectoscopy of conductive structures
- Malozyomov, B.V.
- Prospects For Use of Lithium-Ion Batteries in Transport Systems
- Malozyomov, B.V.
- Deep Electroosmosis Technology for Oil Fields
- Malozyomov, B.V.
- Innovative Technology of Seed Treatment by Electric Corona Discharge