Proceedings of the International Symposium on Mechanical Engineering and Material Science
292 authors
- Li, Guangyi
- Phase-Shifting Control of Double Pulse in Harmonic Elimination
- Li, Guoping
- Research on Current Control Technology of Fine Plasma Cutting
- Li, Jinqi
- The Dynamic Scheduling of Spray Booth Machine in 4S Auto Maintenance Shop
- Li, Ling
- An Empirical Study on the Coordinated Development of the Service Industry and the Innovation of Science and Technology
- Li, MingLi
- Study on magnetic loss properties of ultra-thin nanocrystalline soft magnetic alloy Fe73.4Cu0.6Nb3.5Si13.5B9.0
- Li, Qiang
- The Discussion of the further Studies of the Magnetic Suspension Vibration Isolator
- Li, Siyu
- Application of Environmental Friendly Material R32/R1234ze in Heat Pump Water Heater
- Li, Xiangyang
- The Dynamic Scheduling of Spray Booth Machine in 4S Auto Maintenance Shop
- Li, Xinjuan
- The Simulation Study on Deep-sea Microbes Sampling of Holding the In-Situ Pressure Based on the Pressure Compensation with 316L Stainless Steel Accumulator
- Li, Y L
- Investigations of continuous casting extrusion on the microstructures and properties of Zn-Al and Zn-Al-Ti alloys
- Li, Y.L.
- Effect of ultrasonic cavitation on the wetting and reaction of Al-Ti/C interface
- Li, Yan-jun
- Key problems analysis of large-diameter pipeline tapping machine's design and manufacture
- Li, Zhiguo
- Design and Topology Optimization of Collimation Frame for Two-Dimensional Turntable
- Lian, Jiadi
- Wetting behaviors of water droplet on rough metal substrates
- Liang, Qian-chao
- Energy Simulation and Materials Dynamic Characteristics of Combined Power Plant
- Liao, Zhennan
- The Discussion of the further Studies of the Magnetic Suspension Vibration Isolator
- Lin, Nawen
- Finite Element Analysis and Optimization Design of Combined Vehicle Suspension Girder Lateral Stabilizer Bar Bushing
- Lin, Tu Gan
- Research on the material and structure to the intelligent clutch control system
- Lin, Xiaolan
- Individual Weight Estimation of Cynoglossus-gracilis Based on Measurement of Irregular Image Area
- Lin, YanSong
- Research on Fuel Tank Model Selection of LNG Power Ship Based on Evaporation Rate Control and Construction Cost
- Liu, Cun Xiang
- Research on the material and structure to the intelligent clutch control system
- Liu, Peng
- The Simulation Study on Deep-sea Microbes Sampling of Holding the In-Situ Pressure Based on the Pressure Compensation with 316L Stainless Steel Accumulator
- Liu, Rui
- Synthesis of Polyethylenamine Cellulose and Its Absorbing Ability to Chromium (VI)
- Liu, S.Q.
- Preparation and Characterization of CA/GO Mixed Matrix Forward Osmosis Membranes
- Liu, Xianglei
- Effect of Surface Roughness on the Determination of the Creep Properties of Material by Using Three Points Bending Creep Test
- Liu, Xiao-jie
- Research on the Precision Measuring System of Steel Bearing Aperture Based on Machine Vision
- Liu, Xue
- Analysis of Natural Frequency Sensitivity of Truck Body
- Liu, Xue Jun
- Research on the material and structure to the intelligent clutch control system
- Liu, Yanming
- Coastline Identification from Remote-sensing Image Using Informative Vector Machine Learning
- Liu, Yingjie
- Study on Ozone/Fenton Reagent Co-processing of Wheat Straw Pulp Hypochlorite Bleaching Wastewater
- Liu, Zhaohui
- Design and Topology Optimization of Collimation Frame for Two-Dimensional Turntable
- Liu, Zhilin
- Influence of The Smoothing Parameter in The Re-initialization Equation on The Level Set Interface-capturing
- Loganina, V.I.
- Lime composition for the walls of buildings made of aerated concrete
- Lou, B.
- The research of model on the apparent viscosity of sludge
- Lu, P.
- Preparation and Characterization of CA/GO Mixed Matrix Forward Osmosis Membranes
- Lu, Shuai
- The Dynamic Analysis of Tension Stringing in Transmission Lines Based on ADAMS
- Ma, Guoqiang
- Individual Weight Estimation of Cynoglossus-gracilis Based on Measurement of Irregular Image Area
- Ma, Jian-wu
- Analysis to the Potential of Rainwater Resources Utilization in Kunming area
- Ma, Qinyi
- A Retrieval Method of CAD Semantic Model Based on Design Intention
- Ma, Yi-lai
- SMFF Computation for Probe of Online Magnetic Flux Leakage Detection System with combination of ANSYS and Virtual Work Method
- Makridin, N.I.
- Influence of initial hydration conditions of cement on the process and fracture parameters of hardened cement paste structure of different age
- Makridin, Nikolai Ivanovich
- The Influence of Plasticizerson the Composition of Cement Stone Hydration Products
- Maksimova, I.N.
- Influence of initial hydration conditions of cement on the process and fracture parameters of hardened cement paste structure of different age
- Mao, Jinrong
- Study on joint formation evolution in laser microwelding of Pt-10%Ir and 316 LVM SS crossed wiresCrossed wire, Laser microwelding, Simulation, Joint formation
- Mao, Qing-yuan
- Key problems analysis of large-diameter pipeline tapping machine's design and manufacture
- Min, Kyung-Ju
- Characterization of Superplastic Behavior of AA2195 by Bulging Test
- Min, Kyung-Ju
- A Study on Microstructure of AA2219 Friction Stir Welded Joint
- Moskvin, Roman Nikolaevich
- New Composite Cement for Construction 3D Printers
- Mu, Rui
- An Optimal Selection Method for Product Conceptual Design and Materials Evaluation Based on Quality Function Deployment and Grey Relational Projection
- Ni, Jing
- Wetting behaviors of water droplet on rough metal substrates
- Nie, Xiaogeng
- The Design of a Heavy-load Palletizing Robotic Structure for Coating Handling
- Nikolay, Laskov
- Effective profiles for building constructions
- Noh, Wan-Seok
- A New Ptosis Auto Analysis System and Algorithms Based on Surface Electromyography Sensor
- Pang, H.Y.
- Punching Shear Strength Model for RC Slab-Column Connection Based on Multiaxial Strength Theory of Concrete
- Peng, Wei
- Phase-Shifting Control of Double Pulse in Harmonic Elimination
- Pengb, Yi-Hong
- Light Weight Medium (Pottery Spherical) Cultivation of Plants Used in Green Roof Feasibility Studies
- Pholdee, Nantiwat
- Hybrid TLBO and BFGS for structural health monitoring optimisation problems
- Pitukhin, Alexander V.
- Method of Evaluation of Forestry Machine Roll-over Protective Structure Efficiency
- Poddaeva, Olga Igorevna
- Method and Software for Modeling the Building Materials as Dispersions
- Polubarova, J.V.
- Influence of initial hydration conditions of cement on the process and fracture parameters of hardened cement paste structure of different age
- Pu, S.
- Punching Shear Strength Model for RC Slab-Column Connection Based on Multiaxial Strength Theory of Concrete
- Qi, Zheng
- Advances in Study on Structure of Polysaccharide
- Qian, KunMing
- Study on magnetic loss properties of ultra-thin nanocrystalline soft magnetic alloy Fe73.4Cu0.6Nb3.5Si13.5B9.0
- Qian, W.
- The research of model on the apparent viscosity of sludge
- Qin, Huibin
- The influence of oxygen pressure on the crystallographic structure and magnetic properties of BaM films on Al2O3(0001) substrate
- Qiu, Daode
- Vibration Detect and Analysis on a Large-scale Coal Screening Factory Building
- Qiu, Jinming
- Theoretical and Experimental Study on the Water Curtain Shape and Mechanical Relationship of the Smoke Control System
- Roskilly, Tony
- Control Strategy for a Micro Smart Grid to Meet the Energy Demand of a Household
- Shao, Fangchao
- Correction of axis tilt error for 40Cr ring gear measurement based on collinear measuring heads
- Shao, Fangchao
- The stability of dual-PSD based calibration system without its relative location to 3D forming of carbon fiber
- Shao, Meng-lin
- Energy Simulation and Materials Dynamic Characteristics of Combined Power Plant
- Shao, Qing
- Analysis of Natural Frequency Sensitivity of Truck Body
- She, Wenji
- Effect of Turntable Structure on Electromechanical Characteristics of Laser Tracker System
- Shen, Bing
- Research on the determination method of the intermittent grounding faults of shipboard medium voltage power system
- Shen, Chao
- Vibration Detect and Analysis on a Large-scale Coal Screening Factory Building
- Shih, Ching-Tien
- Implementing Computer Aided Material Design of Multiple Cursors for Disabled People with InLinPreRa
- Shilovskiy, Veniamin N.
- Method of Evaluation of Forestry Machine Roll-over Protective Structure Efficiency
- Skachkov, Yu.P.
- Lime composition for the walls of buildings made of aerated concrete
- Skobtsov, Igor G
- Method of Evaluation of Forestry Machine Roll-over Protective Structure Efficiency
- Smirnov, Vladimir Alexeevich
- On the Determination of the Threshold Content of Fibrous Nanomodifier
- Smirnov, Vladimir Alexeevich
- Method and Software for Modeling the Building Materials as Dispersions
- Son, Dae Gu
- A New Ptosis Auto Analysis System and Algorithms Based on Surface Electromyography Sensor
- Song, Lihua
- A Retrieval Method of CAD Semantic Model Based on Design Intention
- Song, Wenjie
- The Simulation Study on Deep-sea Microbes Sampling of Holding the In-Situ Pressure Based on the Pressure Compensation with 316L Stainless Steel Accumulator
- Song, Ya-wei
- Research on the determination method of the intermittent grounding faults of shipboard medium voltage power system
- Su, Chengzhi
- Correction of axis tilt error for 40Cr ring gear measurement based on collinear measuring heads
- Su, Chengzhi
- The stability of dual-PSD based calibration system without its relative location to 3D forming of carbon fiber
- Su, Guoshao
- Coastline Identification from Remote-sensing Image Using Informative Vector Machine Learning
- Sun, Enji
- Fiber Optic Sensors Materials based Spontaneous Combustion Detection in Goaf Areas
- Tarakanov, Oleg Vyacheslavovich
- The Influence of Plasticizerson the Composition of Cement Stone Hydration Products
- Tian, Qingbo
- Advance on Al2O3 Particulates Reinforced Aluminum Metal Matrix Composites (Al-MMCs) Manufactured by the Power Metallurgy Techniques- Microstructure and Properties
- Tian, Yunchen
- Individual Weight Estimation of Cynoglossus-gracilis Based on Measurement of Irregular Image Area
- W, Jili
- Reliability adaptive modeling method for CNC Machine Tools based on kernel function
- W, Jili
- Reliability Prediction for CNC Machine of Spindle System
- Wang, Cheng
- Experimental Investigation of Oblique Laser Shock Processing on Aero-engine Fan Shaft
- Wang, Chengyun
- The stability of dual-PSD based calibration system without its relative location to 3D forming of carbon fiber
- Wang, Fang
- Application of Environmental Friendly Material R32/R1234ze in Heat Pump Water Heater
- Wang, Huasheng
- Reliability analysis of aerostatic instability of suspension bridge under stochastic wind loading on Bayesian theory
- Wang, L.G.
- Preparation and Characterization of CA/GO Mixed Matrix Forward Osmosis Membranes
- Wang, Linlin
- "San Cai" Human Factors Analysis Model of Civil Aviation Maintenance