Proceedings of the International Symposium on Mechanical Engineering and Material Science

Lime composition for the walls of buildings made of aerated concrete

Authors
V.I. Loganina, M.V. Frolov, Yu.P. Skachkov
Corresponding Author
V.I. Loganina
Available Online December 2016.
DOI
10.2991/ismems-16.2016.29How to use a DOI?
Keywords
Aerated concrete, Calcium silicates, Lime, Strength, Structure formation
Abstract

It is proposed to use for finishing the aerated concrete composition with limy binder. Composition includes limy binder, ground aerated concrete and additives based on a mixture of silicate and calcium aluminum silicates. It has been shown, that the introduction in lime composition ground aerated concrete in an amount of 20% by weight of the lime can improve the strength of lime composites. It is shown, that the combined use of lime, ground aerated concrete and additives based on a mixture of calcium silicate and silica-alumina allows to obtain limy composition, characterized by an accelerated set of plastic strength. The finishing composition on the basis of the developed formulation is characterized by high water-holding capacity, good workability

Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the International Symposium on Mechanical Engineering and Material Science
Series
Advances in Engineering Research
Publication Date
December 2016
ISBN
978-94-6252-277-0
ISSN
2352-5401
DOI
10.2991/ismems-16.2016.29How to use a DOI?
Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - V.I. Loganina
AU  - M.V. Frolov
AU  - Yu.P. Skachkov
PY  - 2016/12
DA  - 2016/12
TI  - Lime composition for the walls of buildings made of aerated concrete
BT  - Proceedings of the International Symposium on Mechanical Engineering and Material Science
PB  - Atlantis Press
SP  - 165
EP  - 169
SN  - 2352-5401
UR  - https://doi.org/10.2991/ismems-16.2016.29
DO  - 10.2991/ismems-16.2016.29
ID  - Loganina2016/12
ER  -