Proceedings of the First International Conference on Information Sciences, Machinery, Materials and Energy
1273 authors
- Lu, J.J.
- Research on Reflection and Transmission at Boundaries in Ultrasonic Testing
- Lu, Lifang
- The Design and Implementation of Distance Network Management System under the Support of Computer
- Lu, Lin
- The Design of real-time Image Compressing System Based on DSP and FPGA
- Lu, Linju
- Near Infrared Spectroscopy Analysis Based on Support Vector Machine
- Lu, Mingquan
- Method for Mitigation of NLOS Error based on SVM using Geometry Information and Training data
- Lu, Mingquan
- Minimum mean square error estimator for mobile location using the pseudo-range TOA measurements
- Lu, Na
- Research on mine fire rescue path based on hybrid algorithm of PSO
- Lu, Peng
- The Integrated navigation numerical correction and prediction of autonomous underwater vehicle (AUV) based on GM (1, 1) model
- Lu, Peng
- A Distributed Control System using CAN bus for an AUV
- Lu, Xiao-Gang
- Establishment of the Elastic Property Database of Fe-base Alloys
- Lu, Xun
- Maximum-Likelihood Classification for MPSK with Compressive Samplings
- Luo, Bo
- A para-virtual SDN simulation system based on Emulab
- Luo, Guoqiang
- Enhancement of the thermal conductivity of Cu Matrix by addition of RGO
- Luo, Hongxiang
- Analysis on Fragmentation Injury of Glare Stun Grenade
- Luo, Jiao
- Borehole IP anomaly characteristics analysis of the single well and the double wells working way
- Luo, Qiong
- Embedded Speech recognition interaction system research
- Luo, Shujian
- Aircraft Spareparts Demand Forecasting based on Multiple ARIMA Model
- Luo, Siming
- Optimal Design and Software Development of Two-stage NGW Planetary Transmission
- Luo, Yinping
- A system preventing children from getting hit while passing by the front based on laser sensor
- Luo, Yunchao
- Regularization Rotational Motion Blur Image Restoration Based on Mixed Norm
- Luo, Zhaohui
- Study on the Peace War Transformation Mechanism of Equipment Maintenance Mobilization
- Luo, Zhonghua
- Reflective Phase Properties of two-dimensional Photonic Crystal within The Bandgaps Based on Surface Structures Regulation
- Lv, Qiujian
- Control-plane Traffic Analysis of UMTS Network
- Lv, Xiao
- A concise operation safety protection device in arm of tower crane and its parameter design
- Lv, Xueqiang
- The automatic recognition based on the grade relationship between words of clustering
- Lv, Zhou
- Power Allocation for Parallel Channels with One-bit Analog-to-digital Conversion
- Lv, Zhou
- State of Charge Estimation for Li-ion Batteries based on double Extended Kalman Filtering Method
- Ma, Fengying
- The Research of back propagation neural network based on genetic algorithm in the gas concentration prediction
- Ma, Fujian
- Structure Topology Optimization Design of Brake Pad in Large Megawatt Wind Turbine Disc Brake
- Ma, Fujun
- Research on Invisible Grid Management of Information Architecture of UI Design
- Ma, Rui
- Research on the Carbonation Model of Stress Concrete Components
- Ma, Shaohua
- Analysis and Study on the Interrupting Characteristic of XRNT High-Voltage Current-Limiting Fuse
- Ma, Shiguo
- ARINC - 429 airborne communications transceiver system based on FPGA implementation
- Ma, Shizhong
- Su Deer special structure with 3 d seismic data interpretation
- Ma, Wencui
- The Evaluation of Plant-Microbial Remediation of Petroleum Contaminated Soil
- Ma, Yongzhong
- Analysis on Fragmentation Injury of Glare Stun Grenade
- Ma, Yunpeng
- Auxiliary differential equation (ADE) implementation of complex-frequency shifted perfectly matched layer (CFS-PML)
- Ma, Zhi-chun
- Analysis of light intensity effect on Photovoltaic cells
- Mao, Baoquan
- Analysis of Multi-flexible-body Modelling of Remote Weapon Station
- Mao, Lin
- Research on paralleling compute efficiency of FIR filter
- Mao, Ning
- Research on geothermal distribution of Hongtoushan underground metal mine
- Mao, Ning
- Test and analysis for ventilation system of Hongtoushan underground mine
- Mao, Ronghai
- Numerical Investigation on Mixing Characteristics in Quenching Zone of Annular RQL Combustors
- Mei, Xiao
- Experimental study on high strength bolt pre-tightening force of friction energy dissipation device
- Meng, Guoying
- Research on Remote Monitoring System for Leakage Protection of Electric Grid in Underground Mine
- Meng, JinZhu
- Analysis of Shipborne Helicopter’s Guidance Error in Anti-Ship Missile Over-the-horizon Attack
- Meng, Junxian
- A Design Method of Low-frequency Power Transmitter based on OPA549
- Meng, Wenjie
- Research on Video Encryption Algorithm in Android Platform
- Meng, XiuYun
- The research on the active vibration isolator
- Meng, Yangyang
- Research on Distribution of Spontaneous Combustion "Three Zones" and Methane Concentration Variation before and after Nitrogen Injection in Goaf
- Miao, Chaodong
- The Intelligent Supervision of The Agriculture Production Based on Internet of Things and Cloud Service Platform
- Miao, Chenglin
- A Realization of RS Code Encoding and Decoding in Software
- Miao, Chenglin
- Design of General Vehicle Bus Testing System
- Miao, Chenglin
- Analysis and Research of routing protocols DSR, AODV, and MIL-STD-188-220C
- Miao, Fengxian
- A smart detection system for power grounding grid based on GPR
- Miao, Shihong
- Research on penetration level of distributed generation in distribution network
- Mo, Qiuyun
- Research on wind field calculation method category
- Mu, Daosheng
- A Dynamic Adaptive Failure Detection Algorithm based on Grey System Theory
- Ni, Yuan
- Stability design of maglev actuator in active vibration control
- Nie, Cong
- Research on Line of Sight Angle Rate Reconstruction based on Strap down Seeker
- Nie, Yufeng
- Simulating creep deformation in generalized visco-elastic medium with the space-time finite element method
- Ning, Bo
- Study on the Voltage Regulation Device at the End of the Low Voltage Line
- Niu, Bo
- Study on Project Management Information System of Engineering Based on WBS
- Niu, Jingyan
- Novel Biotransformation of Digoxigenin by Colletotrichum lini AS3. 4486
- Niu, Shuanbao
- An Novel Power Flow Calculation Model with the Elimination of Interconnecting Nodes
- Niu, Wenyu
- A system preventing children from getting hit while passing by the front based on laser sensor
- Niu, Wenyu
- A design of SMS alarm system based on 51 SCM and GPS positioning module
- Niu, Wenyu
- A SMS Alerted Anti-theft System based on 51 SCM
- Niu, Wenyu
- Research and design of an Anti Omissions System Based on Single-chip Processor
- Non, Members
- A blind EM-based carrier frequency offset estimation algorithm for OFDM signals
- Ou, Bingxian
- Experimental Study of Vibrating Screen Beam Based on Power Flow Method
- Ou, Jianping
- Performance Analysis of detecting Distributed Target Under Correlated K-Distributed Clutter Background
- Pan, Qing
- Research and Design of the Simulation System of ATP System of Quantum satellite
- Pan, Wenwen
- Image retrieval with hand drawn draft based on saliency detection
- Pan, Wenwen
- Brief Analysis on Typical Image Saliency Detection Methods
- Pan, Wenwen
- Image retrieval based on saliency detection in the application of the guide system
- Pan, Wenyang
- Development for dolomite national reference materials
- Pan, Yun
- Discrete Fourier coefficients of a periodic signal amplitude harmonic simulation in the computer
- Pan, Yutian
- Numerical Simulation Analysis on Sailing Resistance of Amphibious Vehicle
- Pang, Gai
- Automatic leukocytes classification by distance transform, moment invariant, morphological features, gray level co-occurrence matrices and SVM
- Peng, Hao
- Fault Tolerant Global Scheduling for Multiprocessor Hard Real Time Systems
- Peng, Hongkun
- Application Study on New-Type Bamboo Materials in Space Design
- Peng, Hua
- A blind EM-based carrier frequency offset estimation algorithm for OFDM signals
- Peng, Hui
- Implementation of portable common building ground resistance measuring instrument
- Peng, Lin
- An Improved alpha-beta Transformation Method of Voltage Sag Detection
- Peng, Xi
- The real-time measurement and control system of the motor used on electric vehicle based on LabVIEW
- Peng, Xiaobo
- Study of PCB micro-drilling geometry detection method based on machine vision
- Ping, Lang
- Simulation Analysis of Microchannel Deformation during LTCC Warm Water Isostatic Pressing Process
- Qi, Lijun
- Modeling and Simulation Analysis of Steering Stability Based on Vehicle Motion Simulator
- Qi, Peng
- Algorithm design and Simulation of optimal maritime search scheme
- Qi, Xiaoxiao
- Software development of DC magnetic bias calculation in the power system
- Qi, Xin
- Research on Welding Machine Control System
- Qi, Xinshe
- Location Optimization Problem with Multi Refineries and Multi Stations
- Qi, Zibo
- Research on the Frequency Spectrum of DC Fault Arc
- Qi, Zibo
- Low Voltage AC Arc Fault Test and Establishment of Database
- Qian, Hongliang
- The bending stiffness deterioration of circular steel tube considering the corrosion
- Qian, Ting
- Temperature and Humidity Data Acquisition System
- Qian, Ting
- Measurement system performance analysis using MINITAB
- Qian, Yingping
- The System Design of Full Servo Planetary Pole Symmetric Pipe Cutting Machine
- Qian, Yong Jiu
- Computational Method for Bearing Capacity of Steel tube Reinforced Concrete Short Column under Axial Loading