Proceedings of the International Conference "Actual Issues of Mechanical Engineering" 2017 (AIME 2017) - Authors

Series:Advances in Engineering Research

Proceedings of the International Conference "Actual Issues of Mechanical Engineering" 2017 (AIME 2017)

513 authors

Shapovalov, Nikolay Afanasyevich: From nano-scale to macrostructure in composite for additive technologies
Sharipov, M. I.: Method of fuzzy controller adaptation
Shchukina, Vera Nikolaevna: Preparatory stage for instrumental monitoring and structural inspection of buildings and structures
Shchurov, Nikolay: Power performance single-phase rectifier depending on topology and control methods
Shein, Nikolay: Research of Refuse Derived Fuel Use with Pyrolysis Furnace
Shekina, Anastasiya Yurievna: Comprehensive use of waste after benificiation of magnetite fraction by floatation
Shevchenko, A. F.: Mathematical Model of Magnetic System of Synchronous Machines with Permanent Magnets and Fractional Single-Toothed Winding
Shevchenko, Andrey: Experimental Study of Actual Operation of Plastic Tube Concrete Constructions
Shevelev, Alexander Pavlovich: Waterflooding for lateral anisotropy of porous media
Shiremetov, V.N.: Heat transfer and modeling hollow cathode material structural state of vacuum plasmatron
Shishkin, A.V.: Heat transfer and modeling hollow cathode material structural state of vacuum plasmatron
Shkel, Yulia: Multiparameter assessment of accumulated fatigue damages level
Shostak, Nikita A.: Research of Processes of Formation and Dissociation of Natural Gas Hydrates
Shtang, A.A.: Set-point Revisiting Of Maximum Impulse Protection Adjustment For DC Electric Traction Network
Shtang, A.A.: Question Of Determining Diagnostics Time Intervals Of Electric Transport Systems Using Time Between Failures
Shtang, A.A.: Improvement Of Method Of Setting Digital Protection Devices In Straight DC Power Networks
Shtang, A.A.: Performance Increase of Lithium-Ion Batteries
Shurov, Nikolay: Reactive power compensation and high-frequency distortions correction in Metro
Sibirtseva, Natalia Borisovna: Process simulation in temperature control system of oil in autogenous grinding mill
Sidorova, Alyona V.: Basics of evaluation methods of HPP resource usage during operation in IPS
Singh, Lok Pratar: Complex study of modified binder properties
Sinoviev, Vasiliy Valentinovich: Interactive environment for simulation manufacturing system in machine building and coal processing
Sirekanyan, Vachagan V.: Superconducting electrokinetic storage for energy saving and energy enhancement in local electric networks
Skipin, L.N.: Improvement of biological recultivation technology of disturbed solid of oil, gas and condensate field
Skvortsov, Sergey A.: Mathematical Model for Calculation of Process of Chemisorption Adsorption of Carbon Dioxide
Slabinskaya, Irina Aleksandrovna: Sustainability of Belgorod Region Enterprises of Building Materials and Building Structures Industry under Sanctions
Slabinskaya, Irina Alexandrovna: Assessment of Costs for Utilization of Amorphous Magnesite By-Products in Complex Production
Smirnov, M.A.: Device For Control Of Integrity Of Graphite Electrodes
Smirnov, M.A.: Performance Increase of Lithium-Ion Batteries
Smirnova, Anastasiya: Russia On World Research Front Of Industrial Scientific Direction
Smolentsev, Nikolai Ivanovich: Superconducting electrokinetic storage for energy saving and energy enhancement in local electric networks
Snigireva, V.A.: Non-linear simulation of load-bearing capacity for steel-encased concrete piles
Soldatenkov, Alexey Sergeevich: Process simulation in temperature control system of oil in autogenous grinding mill
Soldatenkov, Alexey Sergeevich: Identification of building heating systems as controlled objects within automated heat supply stations
Soloveichik, Yu.G.: Finite Element Code for Multidimensional Numerical Analysis of Squirrel-Cage Induction Motor
Sopov, Valentin Ivanovich: Traction network currents distribution under different power supply voltage
Spasibov, Victor Maksimovich: Method and device increasing efficiency of drilling directional wells
Spiridonov, E. A.: Calculation of Energy Losses in Trolleybus Traction Network by Instant Equivalent Circuits Modeling
Stan, Vasily K.: Development of Control System of Hot Water Supply Solar Plant
Starodubov, Aleksey Nikolaevich: Interactive environment for simulation manufacturing system in machine building and coal processing
Stefanyuk, E.V.: Study of Fast Relaxing Excitations Caused by Ultrashort Laser Pulses in Nanoscale Domain
Stefanyuk, E.V.: Mathematical Modelling of Strongly Non-Equilibrium Transfer Processes at Nanoscopic Scale
Stovpenko, Artyom Sergeevich: Movement of materials in gyroscopic-type mixer
Strokova, Valeria Valerievna: Complex study of modified binder properties
Suhodoeva, Tatiana: Numerical investigation of isotropic beam crystallization process under nonuniform cooling
Suranov, Dmitry V.: Mechanisms and models of control of turbulent transfer in boundary layer
Sverguzova, Svetlana Vasilievna: Nanocomposite carbon-bearing sorption material
Syzrantsev, Vladimir: Determination of stresses in tooth roots of gears by Integral Strain Gauges
Syzrantseva, Ksenia: Determination of stresses in tooth roots of gears by Integral Strain Gauges
Tarasyuk, Pavel: Research into Causes of Heat Transfer Resistance Falloff of Enclosure Structures
Tatarenkov, A.I.: Assessment of progressive collapse of operated buildings and structures based upon structural damage
Temlyakov, A.A.: Finite Element Code for Multidimensional Numerical Analysis of Squirrel-Cage Induction Motor
Temlyakova, Z.S.: Finite Element Code for Multidimensional Numerical Analysis of Squirrel-Cage Induction Motor
Teterina, Irina Alexandrovna: Technology of metal-polymer form-building parts of compression molds
Timofeev, D.Yu.: Method of Calculating Intermediate Diametral Sizes and Allowances for Designing Technology of Manufacture of Details
Timoshenkov, A.: Roll Angle Determination of Fast Rotating Object and Orientation System Construction
Timoshenkov, A.: Development of MEMS Angular Rate Sensor with Self-calibration Function
Timoshenkov, S.: Development of MEMS Angular Rate Sensor with Self-calibration Function
Tkachev, V.K.: Study of Fast Relaxing Excitations Caused by Ultrashort Laser Pulses in Nanoscale Domain
Tkachev, V.K.: Mathematical Modelling of Strongly Non-Equilibrium Transfer Processes at Nanoscopic Scale
Tokach, Yulia Egorovna: Effect of parameters of production process of photocatalytic coatings on bactericidal property
Toporkov, Dmitriy M.: Alternative methods of differential leakage factor and windings quality estimation
Tret'yakov, Alexander A.: Mathematical Model for Calculation of Process of Chemisorption Adsorption of Carbon Dioxide
Trubaev, Pavel: Research of Refuse Derived Fuel Use with Pyrolysis Furnace
Trubaev, Pavel: Research into Causes of Heat Transfer Resistance Falloff of Enclosure Structures
Trubitsyn, K.V.: Study of Fast Relaxing Excitations Caused by Ultrashort Laser Pulses in Nanoscale Domain
Trubitsyn, K.V.: Mathematical Modelling of Strongly Non-Equilibrium Transfer Processes at Nanoscopic Scale
Tuktarov, M.: Analysis of Pulsed Operating Mode of Linear Induction Drive of Grain Cleaning Machine
Urbah, A.E.: Economical and Ecological Electric Heaters for Room Heating
Urbakh, A.E.: Effect of Swirling Gas Flow in Electrode Cavity on its Erosion
Valeev, Asamat Salavatovich: Waterflooding for lateral anisotropy of porous media
Vasilenko, Marina Ivanovna: Effect of parameters of production process of photocatalytic coatings on bactericidal property
Vasiliev, Valeriy Ivanovich: Determination of quenching modes after thermodiffusion hardening of parts from gray cast iron
Vdovin, V.A.: Economical and Ecological Electric Heaters for Room Heating
Verboloz, Elena Igorevna: Ball under action of periodic point load
Verevkin, Oleg: Research of Refuse Derived Fuel Use with Pyrolysis Furnace
Vikhman, V.: Features of Use of Profiling Technology as Identification Method
Vikulov, Mikhail A.: Measurements of section pump rotor axial position at Udachny mine
Vilberger, M.: 12-Pulse Rectifier for Traction Substations of Electric Transport
Vilberger, M.: Features of Use of Profiling Technology as Identification Method
Vilberger, M.E.: Question Of Determining Diagnostics Time Intervals Of Electric Transport Systems Using Time Between Failures
Vladykin, Vladimir Nikolaevich: From nano-scale to macrostructure in composite for additive technologies
Vlasov, D.S.: Economical and Ecological Electric Heaters for Room Heating
Vlasov, D.S.: Induction heating based on permanent magnets with magnetic field concentrators
Vokhmin, Dmitriy Mikhailovich: Research of throttled interchamber cross-flow in multifuel engine
Volodchenko, Aleksandr Anatolevich: Effective Composites Employing Fast-Hardening Gypsum Cement Binders for Additive Manufacturing
Volodchenko, Aleksandr Anatolevich: Increasing efficiency of composite thermal insulation foam concretes
Voronenko, Borukh Evseevich: Ball under action of periodic point load
Voronenko, Vladimir Pavlovich: Calculation of Fixing Element of Metal-Polymeric Mold-Forming Surface of Mold in Metal Cage
Voronov, Vasiliy Vasilievich: Increasing efficiency of composite thermal insulation foam concretes
Vorontsov, Victor Mikhailovich: Increasing efficiency of composite thermal insulation foam concretes
Vostroilov, Aleksandr: Vacuum freeze-drying of products of goats lactation through heat pump: model development and equipment
Yakovlev, Evgenii Alexandrovich: Technology of metal-polymer form-building parts of compression molds
Yakovlev, Evgeniy: Intensity enhancement of heat exchange in shell-tube heat exchangers with smooth pipes
Yaroslavcev, M. V.: Selection of Control Algorithms for Hybrid Electric Vehicle
Yaroslavkina, E.: Method for vibro-acoustic signal processing for detection of nascent defect of mechanical assemblies
Yaroslavtsev, M. V.: Calculation of Energy Losses in Trolleybus Traction Network by Instant Equivalent Circuits Modeling
Yarovoy, Mikhail: Design of installation for preparation of food chitosan from crab shell containing raw material by electrophysical processing
Yudaev, Igor: Estimation of Solar Energy Potential under Conditions of Urban Development
Yudin, Konstantin Anatolyevich: Movement of materials in gyroscopic-type mixer