Proceedings of the First Mandalika International Multi-Conference on Science and Engineering 2022, MIMSE 2022 (Mechanical and Electrical) (MIMSE-M-E-I-2022)

Utilization of Sic to Improve the Impact Strength of Aluminum Scrap and Its Microstructure with Sintering Method

Authors
Salman1, *, I. Made Adi Sayoga1, I. Gusti Ngurah Ketut Yudhyadi1, Hendry Sakke Tira1, I. Gede Bawa Susana1, Nurchayati1, Yesung Allo Padangn1
1Department of Mechanical Engineering, University of Mataram, Jl. Majapahait 60, Mataram, Indonesia
*Corresponding author. Email: salman@unram.ac.id
Corresponding Author
Salman
Available Online 26 December 2022.
DOI
10.2991/978-94-6463-078-7_16How to use a DOI?
Keywords
SiC; Al-scrap; Sintering; Impact Strength
Abstract

This study aims to determine the effect of adding the Silicon Carbide (SiC) to aluminum scrap on impact strength and microstructure using powder metallurgy (sintering) method. The materials used in this research are aluminum scrap and silicon carbide (SiC). There are three variations of the mixture, namely the mold mixture of 0, 10 and 20% SiC, respectively. Heating was carried out for 3 h and a temperature of 500 Co. The tests carried out were impact testing and microstructure observations.

The results showed that the variation of the addition of SiC affects the value of the impact strength of the material. The addition of 20% SiC in this study resulted in the highest impact strength of 13.078 × 10–4 J/mm2. Meanwhile, aluminum scrap without the addition of SiC is 11.98 × 10–4 J/mm2.

Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

Volume Title
Proceedings of the First Mandalika International Multi-Conference on Science and Engineering 2022, MIMSE 2022 (Mechanical and Electrical) (MIMSE-M-E-I-2022)
Series
Advances in Engineering Research
Publication Date
26 December 2022
ISBN
978-94-6463-078-7
ISSN
2352-5401
DOI
10.2991/978-94-6463-078-7_16How to use a DOI?
Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

TY  - CONF
AU  - Salman
AU  - I. Made Adi Sayoga
AU  - I. Gusti Ngurah Ketut Yudhyadi
AU  - Hendry Sakke Tira
AU  - I. Gede Bawa Susana
AU  - Nurchayati
AU  - Yesung Allo Padangn
PY  - 2022
DA  - 2022/12/26
TI  - Utilization of Sic to Improve the Impact Strength of Aluminum Scrap and Its Microstructure with Sintering Method
BT  - Proceedings of the First Mandalika International Multi-Conference on Science and Engineering 2022, MIMSE 2022 (Mechanical and Electrical) (MIMSE-M-E-I-2022)
PB  - Atlantis Press
SP  - 141
EP  - 152
SN  - 2352-5401
UR  - https://doi.org/10.2991/978-94-6463-078-7_16
DO  - 10.2991/978-94-6463-078-7_16
ID  - 2022
ER  -