Proceedings of the 2nd International Conference on Modelling, Identification and Control
150 authors
- Acuña, José Antonio Yarza
- Intelligent Retrieval of Axisymmetric Solid Parts in Machining Process Planning by Case Based Reasoning
- Afremov, Leonid
- Hysteresis Characteristics of Interacting Fe/Fe3O4 Core/Shell Nanoparticles
- Aixia, Ling
- Research of Luminescent Properties on Eu3 + Doped YAG
- Alekhin, V.N.
- Simulation of Wind Loads on High Rise Buildings Taking into Account the Construction Site Environment
- Anbao, Wang
- Teaching the PPP Network Course Based on Network Simulator
- Anisimov, Sergei
- Hysteresis Characteristics of Interacting Fe/Fe3O4 Core/Shell Nanoparticles
- Antipin, A.A.
- Simulation of Wind Loads on High Rise Buildings Taking into Account the Construction Site Environment
- Auriemma, Fabio
- Non-linear Impedance of a New Sound Absorptive Fibreless Material Title
- Bobo, Tong
- The Preparation and Biological Toxicity Research of the New Controlled Release Carrier Nano-silica
- Boyu, Zhao
- FEM Analysis of the Different Spinning Speeds of Inner Groove Copper Tube Formed
- Cheng, Kui
- Magnetics, Magetostriction, and Spin Reorientation of Tb0.3Dy0.6Pr0.1(Fe1-xAlx)1.95 Alloys with Substitution of Fe by Al
- Chenying, Yang
- Design and Implementation of Multimedia Material Library Based on Campus Network
- Cong, Cheng
- Weight Analysis of QoS Based Cloud Evaluation Index System
- Cubillos, Mendez
- The Solar Sail and Your Use Into Renewable Energy
- Dalibor, Biolek
- A Full-Wave Rectifier Based on Memristive Systems
- Dao, Huang
- Data Preprocessing and Classification for Taproot site data sets of Panax notoginseng
- Evstigneev, A.V.
- Experimental Modeling of Transition Layer at Phase Boundary in Composites
- Fangli, Qin
- Supply Chain Logistics Business Process Reengineering of Automobile spare parts Based on SCOR
- Fengjuan, Wang
- Performance Analysis on Taper Roller Bearing System Based on Romaxd
- Fengjuan, Wang
- Surface Reconstruction Based on Reverse Engineering and Testing
- Fengjuan, Wang
- Thinking Method of Product Form Design of Bionics Based on Nine Screens
- Fukun, Liu
- Design of 3.7GHz BeO Ceramic Window
- García, Alexis Cordovés
- Intelligent Retrieval of Axisymmetric Solid Parts in Machining Process Planning by Case Based Reasoning
- Ge, Li
- Study of Numerical Method of Synthetical Surface Heat Transfer Coefficient on Rail during Spraying Process
- Gorodilov, S.N.
- Simulation of Wind Loads on High Rise Buildings Taking into Account the Construction Site Environment
- Gorokhov, D.B.
- The Density of Gaps in the Seal Joint in Elastic Contact of Microasperities
- Guikuan, He
- Effect of Shot Peening on Water Vapor Oxidation Resistance of Austenitic Stainless Steel TP347H
- Guo, Cheng
- A Novel Image Mosaic Method for Strip-Type Paper Fragments
- Guotian, He
- Multi-Behavior-Based Path Planning for Indoor Mobile Robot
- Haoyang, Tian
- Qualitative Research on Frequency -Frequency Rank Distribution ofAncient Chinese Characters in Corpus
- Hequn, Li
- On Paving Bricks on the Streets of the Southern Cities of the Song Dynasty
- Hongxu, Chen
- Multi-Behavior-Based Path Planning for Indoor Mobile Robot
- Huangke, Chen
- A Quantitative Mechanism Based on Environmental Compensation for Trash Incineration
- Huanle, Pei
- A Quantitative Mechanism Based on Environmental Compensation for Trash Incineration
- Ilia, Iliushun
- Blocking Temperature and Hysteresis Characteristics of the Decay Products Titanomagnetites
- Iliushin, Iliac
- Hysteresis Characteristics of Interacting Fe/Fe3O4 Core/Shell Nanoparticles
- Jian-min, Gao
- Modeling and Analysis of Linkage Fluctuation Network for Complex Industrial Process
- Jiangang, Qiao
- Development of Portable Bridge Strain Detector
- Jianjun, Zuo
- Recognition Method for Abnormal Water Surface Based on SOM
- Jianping, Zhang
- Hydrogenation of Phenol with Different Catalysts in Supercritical Alcohol
- Jie, Zhang
- Thinking Method of Product Form Design of Bionics Based on Nine Screens
- Jihu, Wan
- Surface Modification of the UHMW-PMMA Film Processing by Solvent Molding
- Jin, He
- Data Preprocessing and Classification for Taproot site data sets of Panax notoginseng
- Jinkui, Li
- The Effects of Different Excavation Angle on Intersecting Tunnel Surrounding Rock Stability
- Jiri, Vavra
- A Full-Wave Rectifier Based on Memristive Systems
- Ji’an, Xia
- Counting of Visible Foreign Particles in Liquid Injection Based on Trajectory Modelling
- Jun, Liu
- The Structures and Properties of Hierarchical Mesoporous TiO2 Microspheres in Dye sensitized Solar Cells Controlled by Different Reagents
- Jun, Liu
- Research of Luminescent Properties on Eu3 + Doped YAG
- Jun-tai, Xie
- Modeling and Analysis of Linkage Fluctuation Network for Complex Industrial Process
- Junjie, Gu
- Hydrogenation of Phenol with Different Catalysts in Supercritical Alcohol
- Juránková, Petra
- The reading of passive UHF tags by RFID technology using a various combinations of antennas motorola AN480
- Ke, Zhao
- Research Based on the Frequency Hopping Wireless Communication Networks
- Khramtsov, S.V.
- Simulation of Wind Loads on High Rise Buildings Taking into Account the Construction Site Environment
- Korolev, E.V.
- Experimental Modeling of Transition Layer at Phase Boundary in Composites
- Kozhevnikov, A.S.
- The Density of Gaps in the Seal Joint in Elastic Contact of Microasperities
- Kravets, Vladislav
- Technique For Determining The Fuel Consumption Of A Vehicle On A Given Route
- Krukhmalev, V.
- Adaptive Control of Vehicleposition with Non-linearizable Feedback
- Lancho, Ricardo Sors
- Intelligent Retrieval of Axisymmetric Solid Parts in Machining Process Planning by Case Based Reasoning
- Le, Gu
- Performance Analysis on Taper Roller Bearing System Based on Romaxd
- Lei, Wang
- The Design of Greenhouse Environment Control System Based on LabVIEW and ZigBee
- Leonid, Afremov
- Blocking Temperature and Hysteresis Characteristics of the Decay Products Titanomagnetites
- Liangliang, Chen
- Musical Signal Processing Based on Digital Signal Processing Technology
- Liangming, Wang
- A Method to Establish the Dynamic Models of Multibody System Based on Kane’s Equations
- Lina, Yan
- An Improved Stereo Matching Algorithm Based on Guided Image Filter
- Lingdong, Kong
- The Structures and Properties of Hierarchical Mesoporous TiO2 Microspheres in Dye sensitized Solar Cells Controlled by Different Reagents
- Linzhe, Ao
- Research on Feature Extraction Curves and Surfaces in Reverse Engineering
- Medvedev, M.
- Adaptive Control of Vehicleposition with Non-linearizable Feedback
- Ming, Li
- Supply Chain Logistics Business Process Reengineering of Automobile spare parts Based on SCOR
- Musarsky, Roman
- Technique For Determining The Fuel Consumption Of A Vehicle On A Given Route
- Muñoz, Rogelio García
- Intelligent Retrieval of Axisymmetric Solid Parts in Machining Process Planning by Case Based Reasoning
- Nan, Zhang
- Development of Portable Bridge Strain Detector
- Noskov, A.S.
- Simulation of Wind Loads on High Rise Buildings Taking into Account the Construction Site Environment
- Ogar, P.M.
- The Density of Gaps in the Seal Joint in Elastic Contact of Microasperities
- Parra, Edwin Esteves
- Intelligent Retrieval of Axisymmetric Solid Parts in Machining Process Planning by Case Based Reasoning
- Petrosyants, Konstantin O.
- High-k Gate Stacks Influence on Characteristics of Nano-scale MOSFET Structures
- Popov, Dmitriy A.
- High-k Gate Stacks Influence on Characteristics of Nano-scale MOSFET Structures
- Pshikhopov, V.
- Adaptive Control of Vehicleposition with Non-linearizable Feedback
- Qing, Zhuo
- Counting of Visible Foreign Particles in Liquid Injection Based on Trajectory Modelling
- Qingqing, Guan
- Hydrogenation of Phenol with Different Catalysts in Supercritical Alcohol
- Ricardo Lorenzo Avila, Aleaga
- Intelligent Retrieval of Axisymmetric Solid Parts in Machining Process Planning by Case Based Reasoning
- Rondon, Arlys Michel Lastres
- Intelligent Retrieval of Axisymmetric Solid Parts in Machining Process Planning by Case Based Reasoning
- Rui, Chen
- Effect of Shot Peening on Water Vapor Oxidation Resistance of Austenitic Stainless Steel TP347H
- Ruidong, Gao
- Moving Object Detection Based on Improved Codebook Model
- Ruidong, Gao
- An Improved Stereo Matching Algorithm Based on Guided Image Filter
- Ruidong, Gao
- A New Fractal Hyperspectral Image Compression Algorithm
- Shaoguo, Wen
- Surface Modification of the UHMW-PMMA Film Processing by Solvent Molding
- Shengyuan, Jiang
- Research on Feature Extraction Curves and Surfaces in Reverse Engineering
- Shigang, Wang
- FEM Analysis of the Different Spinning Speeds of Inner Groove Copper Tube Formed
- Shigang, Wang
- Performance Analysis on Taper Roller Bearing System Based on Romaxd
- Shigang, Wang
- Research on Feature Extraction Curves and Surfaces in Reverse Engineering
- Shigang, Wang
- Surface Reconstruction Based on Reverse Engineering and Testing
- Shigang, Wang
- Thinking Method of Product Form Design of Bionics Based on Nine Screens
- Shmykova, Maria
- Blocking Temperature and Hysteresis Characteristics of the Decay Products Titanomagnetites
- Shuang, Wu
- Research Based on the Frequency Hopping Wireless Communication Networks
- Shufeng, Jiang
- Research on Feature Extraction Curves and Surfaces in Reverse Engineering
- Shufeng, Jiang
- Surface Reconstruction Based on Reverse Engineering and Testing
- Sirui, Wang
- Counting of Visible Foreign Particles in Liquid Injection Based on Trajectory Modelling
- Smirnov, V.A.
- Experimental Modeling of Transition Layer at Phase Boundary in Composites
- Tieliang, Zhang
- A Novel Image Mosaic Method for Strip-Type Paper Fragments
- Tiikoja, Heiki
- Non-linear Impedance of a New Sound Absorptive Fibreless Material Title