Proceedings of the International Renewable Energy Storage Conference (IRES 2022)

Air-Source Heat Pump with Integrated Latent Heat Storage for Residential Buildings: Concept Development and Design Evaluation

Authors
Arash Bastani1, *, Justin Tamasauskas1
1CanmetENERGY, Natural Resources Canada, Varennes, QC, Canada
*Corresponding author. Email: arash.bastani@nrcan-rncan.gc.ca
Corresponding Author
Arash Bastani
Available Online 25 May 2023.
DOI
10.2991/978-94-6463-156-2_4How to use a DOI?
Keywords
Air-Source Heat Pump; PCM thermal storage; refrigerant/PCM heat exchanger; Thermal Storage for both heating and cooling
Abstract

Heat pumps effectively support electrification and reduce energy consumption associated with building heating and cooling. Air-source heat pumps (ASHP) use the ambient air as a thermal source or sink for the heat pump (HP). ASHPs are the most common form of HP system in Canadian residential buildings due to their simplicity and lower initial cost. While the technology is recognized to play a key role in the path to building decarbonization, its widespread adoption will significantly increase peak demand for electricity grids, especially in regions where fossil fuel-based systems are to be replaced. Thermal storage technology can support the increased adoption of ASHPs in those regions by providing a more energy-flexible link between the building’s thermal demand and the electrical grid.

This study investigates a new method of integrating and applying a phase change material (PCM) as latent heat storage in an ASHP system for residential buildings. The approach employs direct heat exchange between the refrigerant and the PCM and indirect discharge of thermal energy into the room. This research describes the concept and evaluates its advantages. It also explores two suggested design configurations to integrate the storage unit into current ASHP systems. This research further evaluates the effect of those configurations on the storage unit’s charging process via a numerical model developed to simulate heat transfer in the storage medium.

Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

Volume Title
Proceedings of the International Renewable Energy Storage Conference (IRES 2022)
Series
Atlantis Highlights in Engineering
Publication Date
25 May 2023
ISBN
978-94-6463-156-2
ISSN
2589-4943
DOI
10.2991/978-94-6463-156-2_4How to use a DOI?
Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

TY  - CONF
AU  - Arash Bastani
AU  - Justin Tamasauskas
PY  - 2023
DA  - 2023/05/25
TI  - Air-Source Heat Pump with Integrated Latent Heat Storage for Residential Buildings: Concept Development and Design Evaluation
BT  - Proceedings of the International Renewable Energy Storage  Conference (IRES 2022)
PB  - Atlantis Press
SP  - 29
EP  - 46
SN  - 2589-4943
UR  - https://doi.org/10.2991/978-94-6463-156-2_4
DO  - 10.2991/978-94-6463-156-2_4
ID  - Bastani2023
ER  -