Proceedings of the 2024 6th International Conference on Structural Seismic and Civil Engineering Research (ICSSCER 2024)

<Previous Article In Volume
Next Article In Volume>

Design of Building Vertical Instrument Based on STM32

Authors
Zhong Jia1, Zhou Hang1, Li Chao1, *, Tang Qing2
1China Construction Fourth Engineering Division Corp. Ltd, Guangdong, 510700, China
2School of Mechanical and Vehicle Engineering, Chongqing University, Chongqing, 400030, China
*Corresponding author. Email: 404926072@qq.com
Corresponding Author
Li Chao
Available Online 29 October 2024.
DOI
10.2991/978-94-6463-556-0_8How to use a DOI?
Keywords
wireless communication; building template installation detection; STM32; three-axis accelerometer; displacement sensor
Abstract

Ensuring the flatness and verticality of the formwork system during building wall construction is crucial. However, challenges such as limited space on site, uneven formwork surfaces, and difficulties in establishing a datum point hinder accurate assessment of formwork flatness. Therefore, developing an intelligent and efficient formwork flatness measuring instrument is essential to help workers achieve desired standards during formwork adjustments. This approach aims to reduce costs associated with additional plastering and materials due to non-compliance with perpendicularity standards after concrete pouring. This paper addresses these challenges by employing displacement sensors, inclination sensors, and other technologies to capture data related to building templates. The data is then displayed on an LCD screen and transmitted and recorded via Bluetooth. The test results show that the intelligent leaning rule can efficiently test the building formwork’s perpendicularity and flatness, which meets the project requirements.

Copyright
© 2024 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the 2024 6th International Conference on Structural Seismic and Civil Engineering Research (ICSSCER 2024)
Series
Advances in Engineering Research
Publication Date
29 October 2024
ISBN
978-94-6463-556-0
ISSN
2352-5401
DOI
10.2991/978-94-6463-556-0_8How to use a DOI?
Copyright
© 2024 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

risenwbib
TY  - CONF
AU  - Zhong Jia
AU  - Zhou Hang
AU  - Li Chao
AU  - Tang Qing
PY  - 2024
DA  - 2024/10/29
TI  - Design of Building Vertical Instrument Based on STM32
BT  - Proceedings of the 2024 6th International Conference on Structural Seismic and Civil Engineering Research (ICSSCER 2024)
PB  - Atlantis Press
SP  - 65
EP  - 73
SN  - 2352-5401
UR  - https://doi.org/10.2991/978-94-6463-556-0_8
DO  - 10.2991/978-94-6463-556-0_8
ID  - Jia2024
ER  -