Proceedings of the International Conference on Maritime and Archipelago (ICoMA 2018)

Bangka’s Tin Sea Sand-Fe3O4 as A Removal of Heavy Metals in By-Product of Tin Ore Processing

Authors
Shofi Anfaresi, Intan Putri, Ridho Mulia, Anisa Alfisyahr, Nurul Muzayyanah
Corresponding Author
Shofi Anfaresi
Available Online October 2019.
DOI
10.2991/icoma-18.2019.7How to use a DOI?
Keywords
tin sand, tailing, heavy metals adsorption, magnetite-coated
Abstract

An experiment to investigate the adsorbent capacity of tin sand from Bangka Island Indonesia toward the lead/Pb(II) ion in lead aqueous solution either non-modified sand and magnetite-coated sand were studied using adsorption method. The adsorbent was activated with sulfide acid (H2SO4) and showed that the tin sand with the highest porosity is the sand with the low activation temperature and the fast activation time, the lowest porosity was reached with the high activation temperature and 2 hours activation time. Both of the tin sand with the highest and lowest porosity were successfully covered with magnetite (Fe3O4) using the ferrite chloride aqueous (FeCl3) (pH=13) and was found that the more amount of Fe ions coated tin sand with the higher temperature, the more Pb(II) ions were absorbed in artificial solution. It occurred in 1 hour and resulted 83.44% at the highest porosity sand and 96.67% at the lowest porosity sand. The adsorption capacity of tailing decreased and only reached 71.76% of adsorption capacity. Moreover, Bangka’s Tin Sea Sand-Fe3O4 can be used as a reusable material for adsorbing Pb2+ ions. The desorption result showed Bangka’s Tin Sea Sand-Fe3O4 could be suitable separated in pH 2 and can re-prepare to derive the new adsorbent.

Copyright
© 2019, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the International Conference on Maritime and Archipelago (ICoMA 2018)
Series
Advances in Engineering Research
Publication Date
October 2019
ISBN
978-94-6252-785-0
ISSN
2352-5401
DOI
10.2991/icoma-18.2019.7How to use a DOI?
Copyright
© 2019, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Shofi Anfaresi
AU  - Intan Putri
AU  - Ridho Mulia
AU  - Anisa Alfisyahr
AU  - Nurul Muzayyanah
PY  - 2019/10
DA  - 2019/10
TI  - Bangka’s Tin Sea Sand-Fe3O4 as A Removal of Heavy Metals in By-Product of Tin Ore Processing
BT  - Proceedings of the International Conference on Maritime and Archipelago (ICoMA 2018)
PB  - Atlantis Press
SP  - 27
EP  - 33
SN  - 2352-5401
UR  - https://doi.org/10.2991/icoma-18.2019.7
DO  - 10.2991/icoma-18.2019.7
ID  - Anfaresi2019/10
ER  -