Proceedings of the 4th Annual International Conference on Material Engineering and Application (ICMEA 2017)
278 authors
- An, Chenggang
- Effect of Hot Rolling Parameters on Texture and Anisotropy of X65MO offshore pipeline steel
- An, Ning
- Test of Desert Sand PVA Fiber Engineered Cementitious Composites
- Ba, Chao
- Impact Analysis of Replacing Business Tax with Value-added Tax on Water Conservancy Project Cost
- Bai, Yu
- Particle in-flight behavior and its determining the microstructure and mechanical properties of zirconia based thermal barrier coatings
- Bao, Mingbo
- Surface molecular imprinted electrochemical sensor for lysozyme based on metal coordinate technology
- Cai, Bo
- Structural characteristics and application in cigarette filter of castor based porous materials
- Cao, Hao
- Application of P-A Fractal Model in the River Network of the Landslides Area
- Che, Jialing
- Test of Desert Sand PVA Fiber Engineered Cementitious Composites
- Che, Jialing
- Study on the Trial-mix and Basic Properties of Desert Sand Steel-PVA Fiber High Performance Concrete
- Chen, Chen
- Application of Compact Type Composite Cross arm in Tower Design
- Chen, Feng
- Tribological Performance of Graphene-Copper-Iron Composite Coating
- Chen, Hongkai
- Study on buckling failure criterion for compression-shear sliding unstable rock
- Chen, Huangbin
- Predictions of concrete compressive strength based a hybrid algorithm of GA-BP
- Chen, Lei
- Pumping Performance Analysis on Crushed Sand Concrete
- Chen, Ruxia
- Effective Conductivity of Graphene Quantum Dots Solution
- Chen, Shi
- Effects of complexant concentration in base solution on the structure and electrochemical properties of LiNi0.8Co0.1Mn0.1O2
- Chen, Shi
- Study on the heat generation characteristics of lithium ion power battery with NCM/Si-C composite anode material
- Chen, Shumei
- Research on Microstructure and Properties of Bimetal Composite Layer Between LAS and HCCI
- Chen, Yan
- Rough Sets and Genetic Algorithm for Power Cable Joints Fault Diagnosis
- Chen, Yuanxin
- Rough Sets and Genetic Algorithm for Power Cable Joints Fault Diagnosis
- Chen, Yueai
- Anion Concentration Distribution and Tourism Resources Analysis of Guizhou Province
- Chen, Yufeng
- Effect of Thermal Aging on the Properties of Insulating Paper
- Chen, Yushan
- Effect of friction stir welding on mechanical properties and fracture mechanism of 7B52 Al laminated composite
- Chen, Zhi
- Surface molecular imprinted electrochemical sensor for lysozyme based on metal coordinate technology
- Chen, Zhonghe
- Surface molecular imprinted electrochemical sensor for lysozyme based on metal coordinate technology
- Cheng, Jun
- Effect of Interval Aging Mode on IMC Growth between Low Ag Content Sn-0.3Ag-0.7Cu-0.5Bi-Ni and Cu Substrate
- Chong, Xiao
- The Crack Tip Fields for Anti-plane Crack in Functionally Graded Magnetoelectroelastic Materials
- Chu, Heli
- Review and Discussion on Standards for Shore-to-Ship Power Supply System
- Cui, Xiaokun
- Preparation and anticorrosion properties of Polydimethylsiloxane (PDMS) coating
- Cui, Yan
- Effect of Interval Aging Mode on IMC Growth between Low Ag Content Sn-0.3Ag-0.7Cu-0.5Bi-Ni and Cu Substrate
- Cui, Zeqin
- The fabrications and optical properties of AlCrNO based Solar Selective Absorber Coatings by cathodic arc ion plating
- Dai, Pan
- Review and Discussion on Standards for Shore-to-Ship Power Supply System
- Dai, Pan
- Rough Sets and Genetic Algorithm for Power Cable Joints Fault Diagnosis
- Dai, Yao
- The Crack Tip Fields for Anti-plane Crack in Functionally Graded Magnetoelectroelastic Materials
- Deng, Liandong
- Synthesis of N-alkylated Chitosan and its Aggregation Behavior
- Deng, Yanxi
- Utilization of Iron Ore Tailing for the Preparation of α-Fe2O3 nanoparticles
- Diao, Guiqiang
- Ca0.5Mg0.5Co2O4 Nanosheets Comprised of Nanoparticles, Synthesis, Characterization and their Catalytic Activity in the Hydrolysis of Ammonia Borane for Hydrogen Production
- Ding, Wenyuan
- Effect of the thermomechanical treatment on the microstructures of CLAM steel
- Ding, Xinxing
- Prediction of component life based by damage mechanics-effective stress method on ANSYS
- Dong, Wenwen
- Discussion on the application of steel plate concrete in Tunnel Engineering
- Fan, Wenliang
- Research and comparison on the method of determining the nonlinearity of univariate function
- Fan, Wenliang
- Analysis of dynamic system reliability based on adaptive response surface method
- Fan, Xueliang
- Tribological Performance of Graphene-Copper-Iron Composite Coating
- Fang, Yiqin
- Mechanical and Pressure-sensitive Properties of Cement Mortar Containing Nano-Fe2O3
- Feng, Lajun
- Effects of water-heat water aging on epoxy composites containing nano-particles of ZnO
- Feng, Xiuxia
- Ca0.5Mg0.5Co2O4 Nanosheets Comprised of Nanoparticles, Synthesis, Characterization and their Catalytic Activity in the Hydrolysis of Ammonia Borane for Hydrogen Production
- Fu, Xinghua
- Study on the influence law of various factors on volcanic autoclaved aerated concrete
- Gao, Ang
- Effects of complexant concentration in base solution on the structure and electrochemical properties of LiNi0.8Co0.1Mn0.1O2
- Gao, Hui
- Research on Microstructure and Properties of Bimetal Composite Layer Between LAS and HCCI
- Gong, Dianqing
- The fabrications and optical properties of AlCrNO based Solar Selective Absorber Coatings by cathodic arc ion plating
- Gu, Chao
- Effect of Thermal Aging on the Properties of Insulating Paper
- Guan, Jing
- Effect of Grafted Chain Length on Hemostatic Activity of N-alkylated Chitosan
- Guan, Jing
- Synthesis of N-alkylated Chitosan and its Aggregation Behavior
- Guo, Shaoxiong
- Tribological Performance of Graphene-Copper-Iron Composite Coating
- Han, DongDong
- Analysis and Evaluation of Natural Diamond Cut by Water Jet - guided Laser
- Han, Donggui
- Very high cycle fatigue behavior of Ti-6Al-4V alloy
- Han, Guansheng
- Test of Desert Sand PVA Fiber Engineered Cementitious Composites
- Han, Junnan
- Chloride Ion Penetration Resistance and Pore Structure of Magnesium Silicate Hydrate (M-S-H) Mortars
- Han, Xueyun
- Effective Conductivity of Graphene Quantum Dots Solution
- Hao, Jian
- Structure and Space Charge Inhibition Performance of Reactive RF Magnetron Sputter Deposited Al2O3 Thin Film on the Fiber Surface
- He, Juxiang
- Review and Discussion on Standards for Shore-to-Ship Power Supply System
- He, Kai
- Research on Influence of Innovative Wind-Resistant Energy Dissipation Devices on Wind Pressures of Low-Rise Gable Roof Buildings Based on Wind Tunnel Test
- He, Ziming
- Chloride Ion Penetration Resistance and Pore Structure of Magnesium Silicate Hydrate (M-S-H) Mortars
- Hou, Shuangshuang
- Study on the influence law of various factors on volcanic autoclaved aerated concrete
- Hou, Zhaoming
- Comparative Study on Application of Fireproof Polystyrene Board and Traditional Polystyrene Board in External Wall Insulation of Building
- Hu, Chaohao
- Hydrothermal synthesis of clew-like Bi2Sn2O7 and visible-light photocatalytic activity
- Hu, Chengyue
- Artificial Neural Network Model for FRP Shear Contribution of RC Beams Strengthened with Externally Bonded FRP Composites
- Hu, Zengrong
- Tribological Performance of Graphene-Copper-Iron Composite Coating
- Huang, Fang
- Effect of the thermomechanical treatment on the microstructures of CLAM steel
- Huang, Shujie
- Effect of Grafted Chain Length on Hemostatic Activity of N-alkylated Chitosan
- Huang, Shujie
- Synthesis of N-alkylated Chitosan and its Aggregation Behavior
- Huang, Wei
- Hydrothermal synthesis of clew-like Bi2Sn2O7 and visible-light photocatalytic activity
- Huang, Yongping
- Chloride Penetration Resistance of Cement Paste Containing Different Contents of CNTs
- Huo, Linsheng
- Research on Influence of Innovative Wind-Resistant Energy Dissipation Devices on Wind Pressures of Low-Rise Gable Roof Buildings Based on Wind Tunnel Test
- Ji, Xu
- Predictions of concrete compressive strength based a hybrid algorithm of GA-BP
- Jia, Yaru
- Compressive Strength of Cement Mortar Containing Carbon Nanotubes (CNTs) under Sulfate Attack and Dry-wet Cycling Environment
- Jiang, Longmin
- Experimental Study on The Seismic Behaviorof Rc Round Columns Strengthened by High Performance Ferrocement Laminates
- Jiang, Peiyang
- Study of The Precipitation Behavior and Strengthening of Carbides during the Partition Process
- Jiang, Peiyang
- Effect of the thermomechanical treatment on the microstructures of CLAM steel
- Jiao, Zhiwei
- Effect of Interval Aging Mode on IMC Growth between Low Ag Content Sn-0.3Ag-0.7Cu-0.5Bi-Ni and Cu Substrate
- Jing, Miaolei
- Effect of Grafted Chain Length on Hemostatic Activity of N-alkylated Chitosan
- LI, Mingjie
- Effective Conductivity of Graphene Quantum Dots Solution
- Li, Chao
- Structure and Space Charge Inhibition Performance of Reactive RF Magnetron Sputter Deposited Al2O3 Thin Film on the Fiber Surface
- Li, Dong
- Reliability Analysis on the Rectangular Orthotropic Membrane Under Concentrated Impact Load
- Li, Gang
- Research on Influence of Innovative Wind-Resistant Energy Dissipation Devices on Wind Pressures of Low-Rise Gable Roof Buildings Based on Wind Tunnel Test
- Li, Guangling
- Advantage Analysis of Composite Girder with Corrugated Steel Web Compared with Concrete Girder in Continuous Rigid Frame Bridge
- Li, Hao
- Ca0.5Mg0.5Co2O4 Nanosheets Comprised of Nanoparticles, Synthesis, Characterization and their Catalytic Activity in the Hydrolysis of Ammonia Borane for Hydrogen Production
- Li, Jing
- Structural characteristics and application in cigarette filter of castor based porous materials
- Li, Liling
- Ca0.5Mg0.5Co2O4 Nanosheets Comprised of Nanoparticles, Synthesis, Characterization and their Catalytic Activity in the Hydrolysis of Ammonia Borane for Hydrogen Production
- Li, Qingshan
- Anion Concentration Distribution and Tourism Resources Analysis of Guizhou Province
- Li, Quanwei
- Test of Desert Sand PVA Fiber Engineered Cementitious Composites
- Li, Quanwei
- Study on the Trial-mix and Basic Properties of Desert Sand Steel-PVA Fiber High Performance Concrete
- Li, Shiyu
- An automatic algorithm based on artificial neural network is applied in taxi target prediction
- Li, Weiwen
- Artificial Neural Network Model for FRP Shear Contribution of RC Beams Strengthened with Externally Bonded FRP Composites
- Li, Weiwen
- Mechanical and Pressure-sensitive Properties of Cement Mortar Containing Nano-Fe2O3
- Li, Weiwen
- Chloride Penetration Resistance of Cement Paste Containing Different Contents of CNTs
- Li, Weiwen
- Compressive Strength of Cement Mortar Containing Carbon Nanotubes (CNTs) under Sulfate Attack and Dry-wet Cycling Environment
- Li, Xiaoming
- Discussion on the application of steel plate concrete in Tunnel Engineering
- Li, Xin
- Review and Discussion on Standards for Shore-to-Ship Power Supply System
- Li, Xin
- Rough Sets and Genetic Algorithm for Power Cable Joints Fault Diagnosis