Proceedings of the 7th International Conference on Applied Engineering (ICAE 2024)

Prototype of Data Acquisition Module

Authors
Aldi Roby Syafriansyah1, *, Rifqi Amalya Fatekha1
1Politeknik Negeri Batam, Batam Kepulauan Riau, 29461, Indonesia
*Corresponding author. Email: aldirobyy@gmail.com
Corresponding Author
Aldi Roby Syafriansyah
Available Online 25 December 2024.
DOI
10.2991/978-94-6463-620-8_22How to use a DOI?
Keywords
Data Acquisition; UDP Communication; Controller; Arduino
Abstract

Microcontrollers are common components used to control electronic systems. To implement a microcontroller according to the desired scheme, a program or sketch upload process is required. If there is a change in the desired program scheme, the developer must modify the program and reupload the sketch to the microcontroller board. This is not a problem if the uploaded program sketch is not complicated, but if the uploaded program is complicated it can cause the microcontroller not responding / freeze due to limited specifications that can only perform low computations. In order to reduce the burden borne by the microcontroller, the user programming scheme is carried out by the PC, by instructing the microcontroller to receive commands from the PC and forwarding the readings from the input pins to the PC by means of UDP communication, so the micro-controller is converted to function as a DAQ (Data Acquisition). This research uses Arduino Mega 2560 as a controller, Wiznet W5500 Lite, as a communication module to the PC. With the concept of data acquisition, there is a communication latency between the DAQ device and the PC, in this study the average latency obtained is 4.99 ms. The data acquisition system studied also has a switching component, the switching used is optocoupler because optocoupler switching has a stable voltage output. In this way, it can allow controlling electronic systems with high computation, and has a stable output according to the supply given to the output pin.

Copyright
© 2024 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

Volume Title
Proceedings of the 7th International Conference on Applied Engineering (ICAE 2024)
Series
Advances in Engineering Research
Publication Date
25 December 2024
ISBN
978-94-6463-620-8
ISSN
2352-5401
DOI
10.2991/978-94-6463-620-8_22How to use a DOI?
Copyright
© 2024 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

TY  - CONF
AU  - Aldi Roby Syafriansyah
AU  - Rifqi Amalya Fatekha
PY  - 2024
DA  - 2024/12/25
TI  - Prototype of Data Acquisition Module
BT  - Proceedings of the  7th International Conference on Applied Engineering (ICAE 2024)
PB  - Atlantis Press
SP  - 287
EP  - 298
SN  - 2352-5401
UR  - https://doi.org/10.2991/978-94-6463-620-8_22
DO  - 10.2991/978-94-6463-620-8_22
ID  - Syafriansyah2024
ER  -