Proceedings of the 2023 Annual Technology, Applied Science and Engineering Conference (ATASEC 2023)

Fatigue Life Prediction of Injection Molded Polymer Materials

Authors
Syamsul Hadi1, *, Agus Hardjito1, Hangga Wicaksono1, Tri Setyo Aji Cahyono1, Wirawan Wirawan1, Zakki Fuadi Emzain1
1Mechanical Engineering Department, State Polytechnic of Malang, Jl. Soekarno-Hatta 9, Malang, 65143, Indonesia
*Corresponding author. Email: syamsul.hadi@polinema.ac.id Email: syampol2003@yahoo.com
Corresponding Author
Syamsul Hadi
Available Online 12 January 2024.
DOI
10.2991/978-94-6463-358-0_24How to use a DOI?
Keywords
Fatigue Life; Molded; Polymer; Prediction; Specimen
Abstract

The problem of this study is the unknown fatigue life (N) prediction of polymer materials, especially plastic specimens made from polypropylene (PP), low density polyethylene mixed with scrap (low density polyethylene/LDPE + 70% scrap), high impact polystyrene (HIPS), acrylonitrile butadiene styrene (ABS), and polystyrene (PS). The aim of the research was to obtain predictions of N from fatigue test results for 5 types of materials, PP, LDPE + 70% scrap, HIPS, ABS, and PS. The research method includes making injection molds for fatigue test specimens according to standard shapes and dimensions, injection molding, specimen preparation, fatigue testing using an integrated rotating bending fatigue testing machine (IRBFTM), analysis of fatigue test results in the form of a bending stress curve (S) to the fatigue life (N). The results of the fatigue test show that the N at 2200 rpm speed testing for PP materials in the range S 70 to 230 MPa is achieved at 15 x105 Cycles, HIPS is 18 x104 Cycles, ABS is 12 x105 Cycles, and PS materials is 16 x104 Cycles, and the LDPE specimen materials mixed with its 70% scrap cannot be tested for fatigue because they are very ductile or fatigue resistant.

Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

Volume Title
Proceedings of the 2023 Annual Technology, Applied Science and Engineering Conference (ATASEC 2023)
Series
Advances in Engineering Research
Publication Date
12 January 2024
ISBN
978-94-6463-358-0
ISSN
2352-5401
DOI
10.2991/978-94-6463-358-0_24How to use a DOI?
Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

TY  - CONF
AU  - Syamsul Hadi
AU  - Agus Hardjito
AU  - Hangga Wicaksono
AU  - Tri Setyo Aji Cahyono
AU  - Wirawan Wirawan
AU  - Zakki Fuadi Emzain
PY  - 2024
DA  - 2024/01/12
TI  - Fatigue Life Prediction of Injection Molded Polymer Materials
BT  - Proceedings of the 2023 Annual Technology, Applied Science and Engineering Conference (ATASEC 2023)
PB  - Atlantis Press
SP  - 235
EP  - 248
SN  - 2352-5401
UR  - https://doi.org/10.2991/978-94-6463-358-0_24
DO  - 10.2991/978-94-6463-358-0_24
ID  - Hadi2024
ER  -