Proceedings of the 2019 International Conference on Precision Machining, Non-Traditional Machining and Intelligent Manufacturing (PNTIM 2019)

Continuous Feed Roller Grinder Design and Its Finite Element Analysis Based on Solid Works

Authors
Wan Hongqiang, Liu Zhihao, Han Quanli, Sun Zhengyang
Corresponding Author
Wan Hongqiang
Available Online November 2019.
DOI
10.2991/pntim-19.2019.5How to use a DOI?
Keywords
Keywords-Roller Mill; Burr Removal; Surface Polishing; 3D Solid Modeling; ANSYS Workbench
Abstract

After the workpiece is processed, the barrel mill is widely used as a burr removal device. Therefore, in order to improve the efficiency of burr removal and enhance the polishing effect on the surface of the workpiece, the conventional roller grinder is improved in design, and the continuous batch grinding method is used instead of the conventional batch grinding method, and the automatic workpiece transfer device is added after the end of the grinding. , thereby increasing the grinding efficiency. Using SolidWorks software, three-dimensional solid modeling and virtual prototype assembly were carried out on the feeding device, grinding device and conveying device. The static analysis of the roller bracket was carried out by ANSYS Workbench software, and the rationality of the design was verified. The results show that the burr removal rate is increased by 10%~20% compared with the traditional grinding machine, and the surface roughness is improved by 1~2, which improves the production efficiency to a certain extent.

Copyright
© 2019, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2019 International Conference on Precision Machining, Non-Traditional Machining and Intelligent Manufacturing (PNTIM 2019)
Series
Atlantis Highlights in Engineering
Publication Date
November 2019
ISBN
978-94-6252-829-1
ISSN
2589-4943
DOI
10.2991/pntim-19.2019.5How to use a DOI?
Copyright
© 2019, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Wan Hongqiang
AU  - Liu Zhihao
AU  - Han Quanli
AU  - Sun Zhengyang
PY  - 2019/11
DA  - 2019/11
TI  - Continuous Feed Roller Grinder Design and Its Finite Element Analysis Based on Solid Works
BT  - Proceedings of the 2019 International Conference on Precision Machining, Non-Traditional Machining and Intelligent Manufacturing (PNTIM 2019)
PB  - Atlantis Press
SP  - 18
EP  - 22
SN  - 2589-4943
UR  - https://doi.org/10.2991/pntim-19.2019.5
DO  - 10.2991/pntim-19.2019.5
ID  - Hongqiang2019/11
ER  -