Experiment on the Electroforming NiCo-SiC Alloy

DOI

10.2991/msmee-17.2017.334How to use a DOI?

Keywords

Electrodeposition, Nanocomposites, Electromagnetic Property, Micro sensor

Abstract

Electrolytic codeposition technique was adopted in the deposition of NiCo-SiC coating on the stainless substrate, using nickel alloyed with iron as the binder phase with SiC as dispersed particles. The results indicated that the deposit with SiC nanoparticles was level and compact; the crystal-planes of the deposit were (111), (220) and (200). The resistivity of deposit was about 30 •cm. when the Fe(wt.%) ranged from 10% to 50% in the deposit, the electrodeposit Ni-20%Fe-SiC has a strong paramagnetism effect with the smallest coercivity of 2.75×10-2 A/m. The remanence showed a monotonic decrease with the increasing iron content in deposit. Which proved that the electroformed NiCo-SiC alloy has good electromagnetic property and higher corrosion resistance than those of electroforming Ni-Co alloy. It is a promising material in the fabrication of micro actuator.

Copyright

© 2017, the Authors. Published by Atlantis Press.

Open Access

This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

TY  - CONF
AU  - Xiaohu Zheng
AU  - Xiaohong ZHu
PY  - 2017/05
DA  - 2017/05
TI  - Experiment on the Electroforming NiCo-SiC Alloy
BT  - Proceedings of the 2017 2nd International Conference on Materials Science, Machinery and Energy Engineering (MSMEE 2017)
PB  - Atlantis Press
SP  - 1827
EP  - 1830
SN  - 2352-5401
UR  - https://doi.org/10.2991/msmee-17.2017.334
DO  - 10.2991/msmee-17.2017.334
ID  - Zheng2017/05
ER  -