Proceedings of the 2018 International Conference on Mathematics, Modeling, Simulation and Statistics Application (MMSSA 2018)

<Previous Article In Volume
Next Article In Volume>

Mathematical Modeling of Droplet Injection Process of Indirect Piezoelectric 3D Printhead for Casting Sand Mold

Authors
Hong Liu, Dexing Zhu, Yang Gao, Fan Peng
Corresponding Author
Dexing Zhu
Available Online January 2019.
DOI
10.2991/mmssa-18.2019.15How to use a DOI?
Keywords
3D printing; printhead; casting sand mold; mathematical molding
Abstract

Aiming at the problem of small size of ejected ink droplet and easy damage to contact between piezoelectric sheet and liquid in the process of casting sand mould 3D printing, an Indirect piezoelectric actuated diaphragm-driven micro-droplet jetting technology is presented to overcome the defects of the existing micro jetting technology. The primary principle of the piezoelectric actuated diaphragm-driven micro jetting technology is introduced and physical model is made to establish the mathematical model. As a result, through the force - displacement equation of piezoelectric actuator was simplified, the force - displacement equation of piezoelectric actuator was obtained. When the fluid movement is considered the law of mass and energy conservation is employed, which greatly simplifies the analyzing procedure, the mathematical model of piezoelectric actuated micro-droplet jetting process on casting sand mould 3D printing is built. The research will provide theoretical basis for revealing the spraying behavior of droplet injection device and realizing the optimal design of system structure for 3D printing of casting sand mold.

Copyright
© 2019, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the 2018 International Conference on Mathematics, Modeling, Simulation and Statistics Application (MMSSA 2018)
Series
Advances in Intelligent Systems Research
Publication Date
January 2019
ISBN
978-94-6252-661-7
ISSN
1951-6851
DOI
10.2991/mmssa-18.2019.15How to use a DOI?
Copyright
© 2019, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

risenwbib
TY  - CONF
AU  - Hong Liu
AU  - Dexing Zhu
AU  - Yang Gao
AU  - Fan Peng
PY  - 2019/01
DA  - 2019/01
TI  - Mathematical Modeling of Droplet Injection Process of Indirect Piezoelectric 3D Printhead for Casting Sand Mold
BT  - Proceedings of the 2018 International Conference on Mathematics, Modeling, Simulation and Statistics Application (MMSSA 2018)
PB  - Atlantis Press
SP  - 63
EP  - 67
SN  - 1951-6851
UR  - https://doi.org/10.2991/mmssa-18.2019.15
DO  - 10.2991/mmssa-18.2019.15
ID  - Liu2019/01
ER  -