Proceedings of the 2016 6th International Conference on Machinery, Materials, Environment, Biotechnology and Computer

The Design For The Basic Rack Tooth Profile Of The Harmonic Gear Drive With Double-Circular-Arc

Authors
Ji-Gui Zheng, Wei Shi, Yong-Jian Ni, He Zhang, XU-Liang Liu
Corresponding Author
Ji-Gui Zheng
Available Online June 2016.
DOI
10.2991/mmebc-16.2016.353How to use a DOI?
Keywords
Mechanical engineering, Double-circular-arc, Harmonic gear drive, Basic rack tooth profile
Abstract

The normal section tooth profile of the hob basic rack is used creatively as the basic rack of the harmonic gear drive with double-circular-arc. Based on the clear selection methods of the basic rack tooth profile's main parameters, the optimization method and process of the basic rack tooth profile is proposed, and the validity and feasibility of the design is verified with example. By simulation, the composition of the circular spline (CS) tooth profile is determined, whose addendum and dedendum tooth profiles are formed by the flexible spline (FS) addendum tooth profile's enveloping, whose middle tooth profile is formed by the FS middle involute tooth profile's enveloping. It's concluded that the harmonic gear drive with this basic rack has fully realized the whole tooth conjugate contact, which is the most effective way to improve the comprehensive performance of the harmonic gear drive.

Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2016 6th International Conference on Machinery, Materials, Environment, Biotechnology and Computer
Series
Advances in Engineering Research
Publication Date
June 2016
ISBN
978-94-6252-210-7
ISSN
2352-5401
DOI
10.2991/mmebc-16.2016.353How to use a DOI?
Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Ji-Gui Zheng
AU  - Wei Shi
AU  - Yong-Jian Ni
AU  - He Zhang
AU  - XU-Liang Liu
PY  - 2016/06
DA  - 2016/06
TI  - The Design For The Basic Rack Tooth Profile Of The Harmonic Gear Drive With Double-Circular-Arc
BT  - Proceedings of the 2016 6th International Conference on Machinery, Materials, Environment, Biotechnology and Computer
PB  - Atlantis Press
SP  - 1738
EP  - 1744
SN  - 2352-5401
UR  - https://doi.org/10.2991/mmebc-16.2016.353
DO  - 10.2991/mmebc-16.2016.353
ID  - Zheng2016/06
ER  -