Design and Simulation on Automatic Door System of Factory Workshop
- DOI
- 10.2991/meic-14.2014.98How to use a DOI?
- Keywords
- Factory workshop;Automatic door;system;design;simulation
- Abstract
In order to study the automatic door systems of factory workshop, and attain low cost and high reliability requirements, the automatic door systems was designed in the factory workshop, door size was determined, material selected and accessories on door was designed. The system was consisted of the main controller, sensor probes, power systems, go round and spreader system, gearing device and guide system under the door. Take the actual center distance as is 2638mm, and body weight of the single door was 56.6kg, and the total weight was 113.2kg.Virtual test analysis by ADAMS software show that change in displacement of three coordinate directions on the automatic doors in factory workshop was produced, and mainly affected by the motion force of the three directions. The force in the Y-direction was maximum. Power consumption was maximum during the middle motion time.
- Copyright
- © 2014, the Authors. Published by Atlantis Press.
- Open Access
- This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).
Cite this article
TY - CONF AU - Fuxiang Xie PY - 2014/11 DA - 2014/11 TI - Design and Simulation on Automatic Door System of Factory Workshop BT - Proceedings of the 2014 International Conference on Mechatronics, Electronic, Industrial and Control Engineering PB - Atlantis Press SP - 436 EP - 439 SN - 2352-5401 UR - https://doi.org/10.2991/meic-14.2014.98 DO - 10.2991/meic-14.2014.98 ID - Xie2014/11 ER -