Research Review on the Influence of Hammering Pile Vibration on the Surrounding Environment

DOI

10.2991/978-94-6463-514-0_14How to use a DOI?

Keywords

penetration of pile with hammer blow; construction vibration; vibration effect; vibration propagation; adjacent building; precision instrument and equipment; vibration control

Abstract

To enhance the understanding of the influencing factors of hammering pile driving vibration on the surrounding environment, this study aims to investigate the vibration source, propagation laws, and impact range during the construction process of hammering pile driving. The goal is to mitigate the adverse effects of vibration on individuals, nearby structures, and sensitive instruments. This paper provides a systematic review of current engineering practices and research findings. The source and propagation law of construction vibration, as well as the vibration frequency characteristics of hammering pile driving, are analyzed. The field monitoring and numerical simulation research progress on the vibration response of hammering pile driving to surrounding people, buildings, and precision instruments and equipment are discussed. The corresponding vibration reduction and isolation measures are summarized from three aspects: vibration source control, propagation process control, and vibration object control. The main conclusions of the paper are as follows: 1) The vibration generated during the construction process of hammering pile sinking is mainly instantaneous, affecting the surrounding environment in the form of elastic wave. 2) With the increase of distance and depth, the vibration rate decays slowly, and the soil properties are the main factors affecting the vibration propagation and attenuation. 3) The main frequency of the vibration is close to the natural frequency of the building. Operating in close proximity can affect the surrounding environment. However, the superposition effect of ground vibration is not significant, and the affected area remains constant regardless of the amplitude or frequency of the pile-sinking force. 4) The most economical and effective measure to reduce the vibration hazard of hammering pile sinking construction is to set up a vibration isolation trench near the protected object. At present, based on existing research, the design of vibration damping measures for this type of construction primarily relies on vibration isolation along the propagation path vibration isolation, the method is relatively straightforward, but there are shortcomings in the research concerning the impact on and protection of precision instruments and equipment during operation. It is necessary to study the applicability of vibration isolation measures along the propagation path for protecting precision instruments and equipment in the near field. This will help advance research on safeguarding precision instruments and equipment.

Copyright

© 2024 The Author(s)

Open Access

Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

TY  - CONF
AU  - Quanjie Chen
AU  - Shantong Liu
AU  - Yijie Wang
AU  - Yihua Gao
AU  - Bo Wen
AU  - Chen Guo
AU  - Yongkang Kang
PY  - 2024
DA  - 2024/09/28
TI  - Research Review on the Influence of Hammering Pile Vibration on the Surrounding Environment
BT  - Proceedings of the 2024 7th International Symposium on Traffic Transportation and Civil Architecture (ISTTCA 2024)
PB  - Atlantis Press
SP  - 116
EP  - 134
SN  - 2352-5401
UR  - https://doi.org/10.2991/978-94-6463-514-0_14
DO  - 10.2991/978-94-6463-514-0_14
ID  - Chen2024
ER  -