Proceedings of the 2024 7th International Symposium on Traffic Transportation and Civil Architecture (ISTTCA 2024)

Finite Element Analysis of Thin-Walled Square CFST Columns with Steel Lining Tubes Under Axial Compression

Authors
Xin Ye1, *
1Chongqing University, Chongqing, China
*Corresponding author. Email: yxcqu1249787686@163.com
Corresponding Author
Xin Ye
Available Online 28 September 2024.
DOI
10.2991/978-94-6463-514-0_8How to use a DOI?
Keywords
Axial compression; thin-walled CFST; bearing capacity; ductility
Abstract

This paper takes thin-walled square CFST columns with lining tube as the research object, aiming to conduct finite element analysis and parameter comparison on their axial compression performance. This member is a new type of composite column, with internal steel lining tubes and outer steel tubes connected by slot welds, which has the advantages of simplified manufacturing process and good constraint performance. To further investigate the mechanical performance of this member, Abaqus was used to conduct axial compression finite element numerical simulation on 18 short columns in this paper. Through parameter analysis, the influence of inner lining to outer pipe, inner pipe strength, external steel pipe strength, and concrete strength on the mechanical properties of components is discussed. The results show that the lining significantly increases the load carrying capacity of thin walled CFST columns, and also significantly improves the ductility of the parts. Meanwhile, as the strength of the internal and external steel pipes and the load carrying capacity of the parts increases, the strength of the concrete also significantly affects the mechanical properties of the components.

Copyright
© 2024 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

Volume Title
Proceedings of the 2024 7th International Symposium on Traffic Transportation and Civil Architecture (ISTTCA 2024)
Series
Advances in Engineering Research
Publication Date
28 September 2024
ISBN
978-94-6463-514-0
ISSN
2352-5401
DOI
10.2991/978-94-6463-514-0_8How to use a DOI?
Copyright
© 2024 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

TY  - CONF
AU  - Xin Ye
PY  - 2024
DA  - 2024/09/28
TI  - Finite Element Analysis of Thin-Walled Square CFST Columns with Steel Lining Tubes Under Axial Compression
BT  - Proceedings of the 2024 7th International Symposium on Traffic Transportation and Civil Architecture (ISTTCA 2024)
PB  - Atlantis Press
SP  - 54
EP  - 62
SN  - 2352-5401
UR  - https://doi.org/10.2991/978-94-6463-514-0_8
DO  - 10.2991/978-94-6463-514-0_8
ID  - Ye2024
ER  -