Proceedings of the 2015 International Symposium on Material, Energy and Environment Engineering

Discussion and Analysis on Measurement Methods for Mould Friction during High Efficiency Continuous Casting

Authors
Yong Ma, Fangyin Wang, Bohan Fang, Wei Gui
Corresponding Author
Yong Ma
Available Online November 2015.
DOI
10.2991/ism3e-15.2015.38How to use a DOI?
Abstract

The friction between the mould and slab has important influences on the process of continuous casting and the slab quality. In this paper, based on the continuous slab caster under hydraulic oscillation, the measurement methods of mould friction are studied. The extraction and realization of friction work method and pressure method are discussed, and the relationship of measured parameters of two methods is deduced in theory. On the basis of the measured data in continuous slab casting, the friction measured parameters are calculated by the two measurement methods in different conditions, and the comparative analyses on the advantages and applicability of the two measuring methods are performed. The research provides theoretical and experimental bases for the reasonable selection and application of friction measurement method.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2015 International Symposium on Material, Energy and Environment Engineering
Series
Advances in Engineering Research
Publication Date
November 2015
ISBN
978-94-6252-141-4
ISSN
2352-5401
DOI
10.2991/ism3e-15.2015.38How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Yong Ma
AU  - Fangyin Wang
AU  - Bohan Fang
AU  - Wei Gui
PY  - 2015/11
DA  - 2015/11
TI  - Discussion and Analysis on Measurement Methods for Mould Friction during High Efficiency Continuous Casting
BT  - Proceedings of the 2015 International Symposium on Material, Energy and Environment Engineering
PB  - Atlantis Press
SP  - 146
EP  - 149
SN  - 2352-5401
UR  - https://doi.org/10.2991/ism3e-15.2015.38
DO  - 10.2991/ism3e-15.2015.38
ID  - Ma2015/11
ER  -