Multichamber Device for Sheet-Metal Treatment Under Pressure

DOI

10.2991/isees-18.2018.39How to use a DOI?

Keywords

sheet forming, elastic medium, gas forming, kinetic energy, backpressure valve, multichamber device, fuel mix, gas pressure

Abstract

The multichamber device belongs to pulsed methods of forming and is mainly intended for use in small-scale production. The process of forming is carried out under pressure of an elastic disk due to kinetic energy of the piston accumulated throughout the working cycle. The piston is accelerated under pressure of high-temperature gas, which is formed in the combustion chamber during the combustion of gaseous fuel mixes. The paper suggests design modifications of the existing device in order to expand its technological potential by increasing the kinetic energy of the piston. This is achieved due to end-to-end channel in the elastic disk and the piston connecting a head-end volume of the working cylinder with the combustion chamber, where the backpressure valve is installed at the end of the channel on the side of the combustion chamber

Copyright

© 2018, the Authors. Published by Atlantis Press.

Open Access

This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

TY  - CONF
AU  - A.A. Musayev
AU  - A.A. Elmurzayev
AU  - R.V. Betrakhmadov
AU  - A.A. Shuaipov
AU  - M.A. Saidov
AU  - P.S. Tsamayeva
AU  - K.Kh. Mazhiyev
AU  - L.M. Maseva
PY  - 2018/12
DA  - 2018/12
TI  - Multichamber Device for Sheet-Metal Treatment Under Pressure
BT  - Proceedings of the International Symposium “Engineering and Earth Sciences: Applied and Fundamental Research” (ISEES 2018)
PB  - Atlantis Press
SP  - 203
EP  - 207
SN  - 2352-5401
UR  - https://doi.org/10.2991/isees-18.2018.39
DO  - 10.2991/isees-18.2018.39
ID  - Musayev2018/12
ER  -