Proceedings of the 4th International Conference on Informatics, Technology and Engineering 2023 (InCITE 2023)

Delignification and Characterization of Fiber from Durian Peel Waste

Authors
Emma Savitri1, *, Prayogo Widyastoto Waluyo2, Leonardus Edward Layantara1, Nathasya Fabiola Rusly1
1Chemical Engineering Program, FacultyofEngineering, University of Surabaya, 60293, Surabaya , Indonesia
2Study Program of Fashion Design and Lifestyle Products, Faculty of Creative Industries, University of Surabaya, Surabaya, Indonesia, 60293
*Corresponding author. Email: savitri_ma@staff.ubaya.ac.id
Corresponding Author
Emma Savitri
Available Online 19 November 2023.
DOI
10.2991/978-94-6463-288-0_11How to use a DOI?
Keywords
Durian Skin; Delignification; Cellulose
Abstract

The limited availability of natural fiber sources makes durian peel waste an alternative source of natural fiber. The characteristic of durian peel waste, which is mechanically strength, has the potential to be developed. During the durian season, the amount of durian consumption by the community increases so that the amount of durian skin waste produced will also increase. It raises environmental problems. Therefore, the research was conducted to study the potential of durian peel fiber as a source of textile fiber. The research carried out several stages, including physical and mechanical initial treatment and a chemical delignification process using an alkaline solution. The crude fiber obtained is then bleached, dried, and analyzed for textile fiber applications. The analysis included fiber content using the Chesson-Datta method, dimensional analysis using Scanning Electron Microscopy, strength, elongation, and fineness (micronaire) analysis. According to analysis, durian skin fiber is rough, brittle and unsuitable for clothing fiber applications. However, it still can apply for other textile applications.

Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

Volume Title
Proceedings of the 4th International Conference on Informatics, Technology and Engineering 2023 (InCITE 2023)
Series
Atlantis Highlights in Engineering
Publication Date
19 November 2023
ISBN
978-94-6463-288-0
ISSN
2589-4943
DOI
10.2991/978-94-6463-288-0_11How to use a DOI?
Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

TY  - CONF
AU  - Emma Savitri
AU  - Prayogo Widyastoto Waluyo
AU  - Leonardus Edward Layantara
AU  - Nathasya Fabiola Rusly
PY  - 2023
DA  - 2023/11/19
TI  - Delignification and Characterization of Fiber from Durian Peel Waste
BT  - Proceedings of the 4th International Conference on Informatics, Technology and Engineering 2023 (InCITE 2023)
PB  - Atlantis Press
SP  - 102
EP  - 113
SN  - 2589-4943
UR  - https://doi.org/10.2991/978-94-6463-288-0_11
DO  - 10.2991/978-94-6463-288-0_11
ID  - Savitri2023
ER  -