Tool path planning in milling of repaired blades of blisks
Authors
Yazhou Feng, Junxue Ren, Yingying Xu
Corresponding Author
Yazhou Feng
Available Online May 2016.
- DOI
- 10.2991/ifeesd-16.2016.135How to use a DOI?
- Keywords
- Blisks, Repaired blade, Repairing and machining, Tool path planning; Machining allowance
- Abstract
A tool path planning approach is proposed in this paper to machine repaired blades of blisks in rough and finish milling. Measured allowances on the blank of the repaired blade are first analyzed with the measured point data. With respect to the non-uniform allowance on the blank, the cutting region for rough milling is determined and tool path planning is conducted based on the proposed iso-stepover method. The cutting region for finish milling is then determined to guarantee that the cutting region can be smoothly connected to the non-cutting region. Finally, a tool path modification method is proposed when the transition region is included.
- Copyright
- © 2016, the Authors. Published by Atlantis Press.
- Open Access
- This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).
Cite this article
TY - CONF AU - Yazhou Feng AU - Junxue Ren AU - Yingying Xu PY - 2016/05 DA - 2016/05 TI - Tool path planning in milling of repaired blades of blisks BT - Proceedings of the 2016 International Forum on Energy, Environment and Sustainable Development PB - Atlantis Press SP - 739 EP - 744 SN - 2352-5401 UR - https://doi.org/10.2991/ifeesd-16.2016.135 DO - 10.2991/ifeesd-16.2016.135 ID - Feng2016/05 ER -