The Structure and Strength Analysis of an Automated Prefabricated Component Manufacturing Mold

Xiaochen Zhang; Yijun Wu; Yanze Long

doi:10.2991/978-94-6463-429-7_21

<Previous Article In Volume

Next Article In Volume>

The Structure and Strength Analysis of an Automated Prefabricated Component Manufacturing Mold

Authors

Xiaochen Zhang¹, Yijun Wu¹, Yanze Long²^{, *}

¹School of Mechanical Engineering, Shenyang Jianzhu University, Shenyang, Liaoning, 110168, China

²College of Engineering Training and Innovation, Shenyang Jianzhu University, Shenyang, Liaoning, 110168, China

^*Corresponding author. Email: lonyanze@sjzu.edu.cn

Corresponding Author

Yanze Long

Available Online 7 June 2024.

DOI: 10.2991/978-94-6463-429-7_21 How to use a DOI?
Keywords: Prefabricated Component Manufacturing Mold; Static Analysis; Structural Optimization
Abstract: In light of the current complexity in production steps for prefabricated components within the prefabricated construction industry, as well as the significant proportion of costs attributed to molds and mold release equipment in overall production costs. The design of an automated prefabricated component manufacturing mold has been accomplishing using SOLIDWORKS. The mechanical analysis of the demoulding device in the multiple components of the mold is carried out by ANSYS WORKBENCH. The analysis shows that the maximum stress in two special working situations is 45.69MPa and 69.84MPa respectively, and the safety factor is as high as 5.1 and 3.4. Based on the topology optimization technology, the structure optimization design of the demoulding device is carried out to make its structure design more reasonable. After six times of optimization, the safety factor of the demoulding device was reduced to 2.5 and 2.1, which successfully saves 9.2% of the steel quantity and achieves higher production efficiency and performance.
Copyright: © 2024 The Author(s)
Open Access: Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

<Previous Article In Volume

Next Article In Volume>

Volume Title: Proceedings of the 2024 7th International Conference on Structural Engineering and Industrial Architecture (ICSEIA 2024)
Series: Atlantis Highlights in Engineering
Publication Date: 7 June 2024
ISBN: 978-94-6463-429-7
ISSN: 2589-4943
DOI: 10.2991/978-94-6463-429-7_21 How to use a DOI?
Open Access: Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

ris enw bib

TY  - CONF
AU  - Xiaochen Zhang
AU  - Yijun Wu
AU  - Yanze Long
PY  - 2024
DA  - 2024/06/07
TI  - The Structure and Strength Analysis of an Automated Prefabricated Component Manufacturing Mold
BT  - Proceedings of the 2024 7th International Conference on Structural Engineering and Industrial Architecture (ICSEIA 2024)
PB  - Atlantis Press
SP  - 194
EP  - 202
SN  - 2589-4943
UR  - https://doi.org/10.2991/978-94-6463-429-7_21
DO  - 10.2991/978-94-6463-429-7_21
ID  - Zhang2024
ER  -

download .riscopy to clipboard