Design and Build a Charging Monitoring System Power on Level Crossing Batteries with Arduino IoT Application Remote Based ESP32 Devkit 1

DOI

10.2991/978-94-6463-126-5_12How to use a DOI?

Keywords

Battery; Charging; ESP 32 Devkit 1; Arduino IoT Cloud; Current sensors; Voltage Divider Sensor

Abstract

Batteries play a role in storing electrical energy reserves. In level crossing using batteries as a backup power supply. Monitoring for charging the batteries used in level crossing real time to show the incoming voltage and current, so there is often interference, namely the doorstop that failed to rise due to low voltage. Based on these problems, the authors design a monitoring system for the incoming voltage and current to the battery which aims to prevent interference with the doorstop caused by low voltage. This study uses an ESP 32 Devkit 1 microcontroller US a microcontroller. Voltage readings use a voltage divider circuit connected to port the microcontrollers, for current readings using the ACS758 sensor, Arduino IoT Remote as a remote monitoring application. The function test on the tool is carried out ten times to ensure that each sensor contained in the tools can function properly. The results of the function test are compared with the measurements read on the multimeter. The results of testing the tool, the ESP 32 Devkit 1 can send data by WIFI so that it can be read on the application. In the voltage reading there is the highest percentage of error rate of 1.6% on the digital Avometer. In the current reading there is the highest error percentage of 0.9% with a difference of 0.3 A.

Copyright

© 2023 The Author(s)

Open Access

Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

TY  - CONF
AU  - Sekar Ayu Nurlaili
AU  - Natriya Faisal Rachman
AU  - Andri Pradipta
AU  - Sunardi
PY  - 2023
DA  - 2023/03/31
TI  - Design and Build a Charging Monitoring System Power on Level Crossing Batteries with Arduino IoT Application Remote Based ESP32 Devkit 1
BT  - Proceedings of the International Conference on Railway and Transportation (ICORT 2022)
PB  - Atlantis Press
SP  - 104
EP  - 117
SN  - 2352-5401
UR  - https://doi.org/10.2991/978-94-6463-126-5_12
DO  - 10.2991/978-94-6463-126-5_12
ID  - Nurlaili2023
ER  -