Proceedings of the 2017 5th International Conference on Machinery, Materials and Computing Technology (ICMMCT 2017)

Influence of Permeability on Axial Symmetric Consolidation Method via Plaxis3D

Authors
Binbin Xu
Corresponding Author
Binbin Xu
Available Online April 2017.
DOI
10.2991/icmmct-17.2017.29How to use a DOI?
Keywords
Plaixs3D AE, axial symmetric consolidation, Terzaghi's theory, Barron's theory.
Abstract

As an efficient treatment in soft ground, the drainage consolidation methods have been widely used in the engineering. Accordingly, the numerical technical also develops rapidly. The vacuum load is newly added in Plaxis3D AE and the effect of this new feature is discussed in this paper. A simple axial symmetric finite element model with sand well is established to investigate the influence of permeability coefficient on the horizontal consolidation. The results show that as the permeability coefficient of the sand well becomes large, the rate of consolidation also increases. Therefore, the treatment that the drainage line/surface assumes that the drainage capacity of vertical drain is infinite is unreasonable, which may result in overestimation of the ground deformation. The drainage surface is recommended to set on the top of the sand well to simulate the vacuum load and the degree of vacuum can be transferred to the bottom of ground gradually through the sand well.

Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2017 5th International Conference on Machinery, Materials and Computing Technology (ICMMCT 2017)
Series
Advances in Engineering Research
Publication Date
April 2017
ISBN
978-94-6252-318-0
ISSN
2352-5401
DOI
10.2991/icmmct-17.2017.29How to use a DOI?
Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Binbin Xu
PY  - 2017/04
DA  - 2017/04
TI  - Influence of Permeability on Axial Symmetric Consolidation Method via Plaxis3D
BT  - Proceedings of the 2017 5th International Conference on Machinery, Materials and Computing Technology (ICMMCT 2017)
PB  - Atlantis Press
SP  - 142
EP  - 145
SN  - 2352-5401
UR  - https://doi.org/10.2991/icmmct-17.2017.29
DO  - 10.2991/icmmct-17.2017.29
ID  - Xu2017/04
ER  -