The confirmation of simulation parameter and analysis of temperature field of 430 ferrite stainless steel in water-cooling condition with 3D-CAFE method

DOI

10.2991/icmit-16.2016.130How to use a DOI?

Keywords

3D-CAFE; columnar grains; equiaxed grains

Abstract

Under water cooling condition, the solidification structure is almost equiaxed grains, and the diameter of equiaxed grains is 0.5 mm~1mm, columnar grains are relative small, columnar grain width is only a few tenths of millimeters, with the length is 0.5 mm~1.5 mm. When the top heat transfer coefficient is 100 W/ (m2 K), and the around and the bottom heat transfer coefficient are 2000 W/ (m2 K)respectively, the solidification structure of the simulation computation is basically with experiment. the casting formed a symmetrical temperature field along the longitudinal section during solidification, the casting top grey area is solidifying contraction.

Copyright

© 2016, the Authors. Published by Atlantis Press.

Open Access

This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

TY  - CONF
AU  - Pei-Xiao Liu
AU  - Yan-Xiang Li
AU  - Rui-Peng Pang
PY  - 2016/04
DA  - 2016/04
TI  - The confirmation of simulation parameter and analysis of temperature field of 430 ferrite stainless steel in water-cooling condition with 3D-CAFE method
BT  - Proceedings of the 2016 3rd International Conference on Mechatronics and Information Technology
PB  - Atlantis Press
SP  - 726
EP  - 730
SN  - 2352-538X
UR  - https://doi.org/10.2991/icmit-16.2016.130
DO  - 10.2991/icmit-16.2016.130
ID  - Liu2016/04
ER  -