Proceedings of the 5th International Conference on Mechanical Engineering, Materials and Energy (5th ICMEME2016)

<Previous Article In Volume
Next Article In Volume>

Shape Optimization of the Air Compressor Supporting Leg by Using the Optimization Technique

Authors
Witchakorn Wongchanasit, Teetut Dolwichai, Chalothorn Thumthea
Corresponding Author
Witchakorn Wongchanasit
Available Online December 2016.
DOI
10.2991/icmeme-16.2016.10How to use a DOI?
Keywords
Air compressor supporting leg, Optimization technique, Genetic algorithms,Shape optimization Materials reduction.
Abstract

The air conditioner installation in general, the air compressor is installed at the external of the building that has well for heat rejected and pretty location. The air compressor must be used the supporting leg for support the its weight. Now a day, the production of supporting leg has the measure to reduce its cost by reduction of material weight but its strength usable. According to material weight reduction, supporting leg shape and cross section may be change. This is the point of this work. The objective work is minimizing the material weight but it also supportable its weight. This problem can solve by the optimization technique. The optimization technique which this way is known and the most widely used for structural design problem is Genetic Algorithms. This research used the Non-Dominated Sorting Genetic Algorithms method for solve the multi-objective problem which it are minimize cross sectional area and minimize deflection of supporting leg and the constraint conditions is the supporting leg's bending stress does not exceed the strength of materials.

Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the 5th International Conference on Mechanical Engineering, Materials and Energy (5th ICMEME2016)
Series
Advances in Engineering Research
Publication Date
December 2016
ISBN
978-94-6252-281-7
ISSN
2352-5401
DOI
10.2991/icmeme-16.2016.10How to use a DOI?
Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

risenwbib
TY  - CONF
AU  - Witchakorn Wongchanasit
AU  - Teetut Dolwichai
AU  - Chalothorn Thumthea
PY  - 2016/12
DA  - 2016/12
TI  - Shape Optimization of the Air Compressor Supporting Leg by Using the Optimization Technique
BT  - Proceedings of the 5th International Conference on Mechanical Engineering, Materials and Energy (5th ICMEME2016)
PB  - Atlantis Press
SP  - 58
EP  - 62
SN  - 2352-5401
UR  - https://doi.org/10.2991/icmeme-16.2016.10
DO  - 10.2991/icmeme-16.2016.10
ID  - Wongchanasit2016/12
ER  -